Notification Summary | |
None Defined | |
Object Summary | |
accessLevel |
Object ID: 1.3.6.1.4.1.161.19.3.4.8.1.4
User access level. |
allowedIPAccess1 |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.94
Allow access to CMM Management from this IP. 0 is default setting to allow from all IPs. |
allowedIPAccess2 |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.95
Allow access to CMM Management from this IP. 0 is default setting to allow from all IPs. |
allowedIPAccess3 |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.96
Allow access to CMM Management from this IP. 0 is default setting to allow from all IPs. |
clearEventLog |
Object ID: 1.3.6.1.4.1.161.19.3.4.7.2
Setting the variable to 1 will clear the event log. |
cmm3SnmpGPSSyncTrapEnable |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.98
Variable to enable/disable GPS sync/out-sync traps. |
cmmPortEntry |
Object ID: 1.3.6.1.4.1.161.19.3.4.4.1.1
A CMM port entry containing objects with port status. |
cmmPortTable |
Object ID: 1.3.6.1.4.1.161.19.3.4.4.1
A list of CMM III port entries. |
cmmSwitchEntry |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1
CMM MIB counters |
cmmSwitchMirrorSrcPortsEntry |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.4.1
CMM Switch Mirror Source Ports |
cmmSwitchMirrorSrcPortsTable |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.4
Table of CMM Switch Mirror Source Ports. |
cmmSwitchTable |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1
Table of CMM MIB counters. |
cmmUserEntry |
Object ID: 1.3.6.1.4.1.161.19.3.4.8.1
User entry. |
cmmUserTable |
Object ID: 1.3.6.1.4.1.161.19.3.4.8
User information table. |
defaultGateway |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.4
Default gateway |
deviceType |
Object ID: 1.3.6.1.4.1.161.19.3.4.4.2
A textual string containing information about device type. |
displayOnlyAccess |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.13
Display only access to web interface and telnet. |
displayOnlyStatus |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.15
Display only password status. |
duplexStatus |
Object ID: 1.3.6.1.4.1.161.19.3.4.4.1.1.4
Half-duplex data transmission or Full-duplex data transmission. |
entryIndex |
Object ID: 1.3.6.1.4.1.161.19.3.4.8.1.1
User information table index. |
eventLog |
Object ID: 1.3.6.1.4.1.161.19.3.4.6.1
CMM Event log. |
fullAccess |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.14
Full access password to web interface and telnet. |
fullAccessStatus |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.16
Full access password status. |
gpsAntennaConnection |
Object ID: 1.3.6.1.4.1.161.19.3.4.5.7
Antenna Connection status. |
gpsDate |
Object ID: 1.3.6.1.4.1.161.19.3.4.5.3
CMM-III GPS date. |
gpsHeight |
Object ID: 1.3.6.1.4.1.161.19.3.4.5.6
CMM height. |
gpsInvalidMsg |
Object ID: 1.3.6.1.4.1.161.19.3.4.5.10
Number of invalid messages. |
gpsLatitude |
Object ID: 1.3.6.1.4.1.161.19.3.4.5.8
CMM Latitude. |
gpsLongitude |
Object ID: 1.3.6.1.4.1.161.19.3.4.5.9
CMM longitude. |
gpsReInitCount |
Object ID: 1.3.6.1.4.1.161.19.3.4.5.13
Number of times the GPS device has been completely re-initialized. |
gpsReceiverInfo |
Object ID: 1.3.6.1.4.1.161.19.3.4.5.12
A textual string contains information on GPS receiver. |
gpsRestartCount |
Object ID: 1.3.6.1.4.1.161.19.3.4.5.11
Number of unit restart. |
gpsSatellitesTracked |
Object ID: 1.3.6.1.4.1.161.19.3.4.5.5
Current number of satellites GPS tracked. |
gpsSatellitesVisible |
Object ID: 1.3.6.1.4.1.161.19.3.4.5.4
Number of satellites the GPS is supposed to see. |
gpsTime |
Object ID: 1.3.6.1.4.1.161.19.3.4.5.2
CMM-III GPS time. |
gpsTimingPulse |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.1
(1) -- Master. (0) -- Slave. |
gpsTrackingMode |
Object ID: 1.3.6.1.4.1.161.19.3.4.5.1
CMM-III GPS tracking mode. |
height |
Object ID: 1.3.6.1.4.1.161.19.3.4.4.11
The height of CMM-III unit. |
ipAccessFilterEnable |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.93
To enable or disable IP access filtering to Management functions. (0) - IP access will be allowed from all addresses. (1) - IP access will be controlled using allowedIPAccess1-3 entries. |
lan1Ip |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.2
LAN 1 IP. |
lan1SubnetMask |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.3
LAN 1 subnet mask. |
latitude |
Object ID: 1.3.6.1.4.1.161.19.3.4.4.9
CMM-III latitude. |
linkSpeed |
Object ID: 1.3.6.1.4.1.161.19.3.4.4.1.1.3
Network connectivity, 100BaseT or 10BaseT. |
linkStatus |
Object ID: 1.3.6.1.4.1.161.19.3.4.4.1.1.2
The current operational state of the port. |
longitude |
Object ID: 1.3.6.1.4.1.161.19.3.4.4.10
CMM-III longitude. |
macAddress |
Object ID: 1.3.6.1.4.1.161.19.3.4.4.14
MAC address of the unit. |
managementStatus |
Object ID: 1.3.6.1.4.1.161.19.3.4.4.1.1.7
Management Port status indicates whether port is configred as a CMM3 Management Port. |
mirSrcPortNumber |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.4.1.1
A unique value for each CMM port. Its value starts from 1 |
mirSrcRxEnable |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.4.1.2
A unique value for each CMM port. Its value starts from 1 |
mirSrcTxEnable |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.4.1.3
A unique value for each CMM port. Its value starts from 1 |
mirrorCapturePort |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.3
A unique value for each CMM port. Its value starts from 1 |
ntpLog |
Object ID: 1.3.6.1.4.1.161.19.3.4.6.2
CMM3 NTP Log |
pkts1024to1522Octets |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.36
The number of packets (including error packets) that are between 1024 and 1522 bytes long. |
pkts128to255Octets |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.33
The number of packets (including error packets) that are between 128 and 255 bytes long. |
pkts256to511Octets |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.34
The number of packets (including error packets) that are between 256 and 511 bytes long. |
pkts512to1023Octets |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.35
The number of packets (including error packets) that are between 512 and 1023 bytes long. |
pkts64Octets |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.31
The number of packets (including error packets) that are 64 bytes long. |
pkts65to127Octets |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.32
The number of packets (including error packets) that are between 65 and 127 bytes long. |
pldVersion |
Object ID: 1.3.6.1.4.1.161.19.3.4.4.3
Version of PLD code. |
port1Config |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.18
Link speed configuration on port 1. |
port1Description |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.26
Port 1 text description. |
port1Management |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.83
Configure Port 1 as a Management Port. (1) -- Port 1 is a Management port. (0) -- Port 1 is not a Management port. |
port1PowerCtr |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.5
Power control for port 1. (1) -- Power on. (0) -- Power off |
port1PwrReset |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.63
If Port 1 is Powered, attched device will be reset when set to 1. If Port 1 is Not Powered, nothing will happen. |
port1Uplink |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.46
Configure Port 1 as Uplink Port. (1) -- Port 1 is an uplink port. (0) -- Port 1 is not an uplink port. |
port1VlanConf |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.55
Port 1 VLAN Port Configuration. Bitmap determines which Port(s) Port 1 will egress data. 0 means no ports, 2 means port 2, 6 means ports 2 and 3, etc. |
port2Config |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.19
Link speed configuration on port 2. |
port2Description |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.27
Port 2 text description. |
port2Management |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.84
Configure Port 2 as a Management Port. (1) -- Port 2 is a Managementport. (0) -- Port 2 is not a Management port. |
port2PowerCtr |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.6
Power control for port 2. (1) -- Power on. (0) -- Power off. |
port2PwrReset |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.64
If Port 2 is Powered, attched device will be reset when set to 1. If Port 2 is Not Powered, nothing will happen. |
port2Uplink |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.47
Configure Port 2 as Uplink Port. (1) -- Port 2 is an uplink port. (0) -- Port 2 is not an uplink port. |
port2VlanConf |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.56
Port 2 VLAN Port Configuration. Bitmap determines which Port(s) Port 2 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc. |
port3Config |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.20
Link speed configuration on port 3. |
port3Description |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.28
Port 3 text description. |
port3Management |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.85
Configure Port 3 as a Management Port. (1) -- Port 3 is a Management port. (0) -- Port 3 is not a Management port. |
port3PowerCtr |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.7
Power control for port 3. (1) -- Power on. (0) -- Power off |
port3PwrReset |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.65
If Port 3 is Powered, attched device will be reset when set to 1. If Port 3 is Not Powered, nothing will happen. |
port3Uplink |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.48
Configure Port 3 as Uplink Port. (1) -- Port 3 is an uplink port. (0) -- Port 3 is not an uplink port. |
port3VlanConf |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.57
Port 3 VLAN Port Configuration. Bitmap determines which Port(s) Port 3 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc. |
port4Config |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.21
Link speed configuration on port 4. |
port4Description |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.29
Port 4 text description. |
port4Management |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.86
Configure Port 4 as a Management Port. (1) -- Port 4 is a Management port. (0) -- Port 4 is not a Management port. |
port4PowerCtr |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.8
Power control for port 4. (1) -- Power on. (0) -- Power off |
port4PwrReset |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.66
If Port 4 is Powered, attched device will be reset when set to 1. If Port 4 is Not Powered, nothing will happen. |
port4Uplink |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.49
Configure Port 4 as Uplink Port. (1) -- Port 4 is an uplink port. (0) -- Port 4 is not an uplink port. |
port4VlanConf |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.58
Port 4 VLAN Port Configuration. Bitmap determines which Port(s) Port 4 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc. |
port5Config |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.22
Link speed configuration on port 5. |
port5Description |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.30
Port 5 text description. |
port5Management |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.87
Configure Port 5 as a Management Port. (1) -- Port 5 is a Management port. (0) -- Port 5 is not a Management port. |
port5PowerCtr |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.9
Power control for port 5. (1) -- Power on. (0) -- Power off |
port5PwrReset |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.67
If Port 5 is Powered, attched device will be reset when set to 1. If Port 5 is Not Powered, nothing will happen. |
port5Uplink |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.50
Configure Port 5 as Uplink Port. (1) -- Port 5 is an uplink port. (0) -- Port 5 is not an uplink port. |
port5VlanConf |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.59
Port 5 VLAN Port Configuration. Bitmap determines which Port(s) Port 5 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc. |
port6Config |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.23
Link speed configuration on port 6. |
port6Description |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.31
Port 6 text description. |
port6Management |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.88
Configure Port 6 as a Management Port. (1) -- Port 6 is a Management port. (0) -- Port 6 is not a Management port. |
port6PowerCtr |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.10
Power control for port 6. (1) -- Power on. (0) -- Power off |
port6PwrReset |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.68
If Port 6 is Powered, attched device will be reset when set to 1. If Port 6 is Not Powered, nothing will happen. |
port6Uplink |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.51
Configure Port 6 as Uplink Port. (1) -- Port 6 is an uplink port. (0) -- Port 6 is not an uplink port. |
port6VlanConf |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.60
Port 6 VLAN Port Configuration. Bitmap determines which Port(s) Port 6 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc. |
port7Config |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.24
Link speed configuration on port 7. |
port7Description |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.32
Port 7 text description. |
port7Management |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.89
Configure Port 7 as a Management Port. (1) -- Port 7 is a Management port. (0) -- Port 7 is not a Management port. |
port7PowerCtr |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.11
Power control for port 7. (1) -- Power on. (0) -- Power off |
port7PwrReset |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.69
If Port 7 is Powered, attched device will be reset when set to 1. If Port 7 is Not Powered, nothing will happen. |
port7Uplink |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.52
Configure Port 7 as Uplink Port. (1) -- Port 7 is an uplink port. (0) -- Port 7 is not an uplink port. |
port7VlanConf |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.61
Port 7 VLAN Port Configuration. Bitmap determines which Port(s) Port 7 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc. |
port8Config |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.25
Link speed configuration on port 8. |
port8Description |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.33
Port 8 text description. |
port8Management |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.90
Configure Port 8 as a Management Port. (1) -- Port 8 is a Management port. (0) -- Port 8 is not a Management port. |
port8PowerCtr |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.12
Power control for port 8. (1) -- Power on. (0) -- Power off |
port8PwrReset |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.70
If Port 8 is Powered, attched device will be reset when set to 1. If Port 8 is Not Powered, nothing will happen. |
port8Uplink |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.53
Configure Port 8 as Uplink Port. (1) -- Port 8 is an uplink port. (0) -- Port 8 is not an uplink port. |
port8VlanConf |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.62
Port 8 VLAN Port Configuration. Bitmap determines which Port(s) Port 8 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc. |
portIndex |
Object ID: 1.3.6.1.4.1.161.19.3.4.4.1.1.1
A unique value for each CMM port. |
portMirrorEnable |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.2
A unique value for each CMM port. Its value starts from 1 |
portNumber |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.1
A unique value for each CMM port. Its value starts from 1 |
powerStatus |
Object ID: 1.3.6.1.4.1.161.19.3.4.4.1.1.5
Port power status indicates power on or power off. |
reboot |
Object ID: 1.3.6.1.4.1.161.19.3.4.7.1
Setting the variable to 1 will reboot the unit. When the unit finishs rebooting, it will be in finishedReboot state. |
rebootIfRequired |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.54
Reboot CMM if required. (1) -- Check if CMM reboot is required and do so. (0) -- Do not check for reboot. |
rxAlignmentErrors |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.12
The number of packets received by a port that have a length (excluding framing bits but including FCS) between 64 and 1522 bytes, inclusive, and have a bad FCS with a non-integral number of bytes. |
rxBroadcastPkts |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.4
The number of good packets received by a port that are directed to the broadcast address. This counter does not include error broadcast packets or valid multicast packets. |
rxDropPkts |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.2
The number of good packets received by a port that were dropped due to lack of resources(e.g., lack of input buffers)or were dropped due to lack of resources before a determination of the validity of the packet was able to be made (e.g., receive FIFO overflow). The counter is only incremented if the receive error was not counted by either the RxExcessSizeDisc, the RxAlignmentErrors or the RxRCSErrors counters. |
rxExcessSizeDisc |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.15
The number of good packets received by a port that are greater than 1536 bytes (excluding framing bits but including FCS) and were discarded due to excessive length. Note that the RxOversizePkts counter alone is incremented for packets in the range of 1523-1536 bytes inclusive, whereas both this counter and the RxOversizePkts are incremented for packets of 1537 bytes and higher. |
rxFCSErrors |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.13
The number of packets received by a port that have a length (excluding framing bits but including FCS) between 64 and 152 bytes, and have a bad FCS with an integral number of bytes. |
rxFragments |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.9
The number of packets received by a port that are less than 64 bytes(excluding framing bits) and have either an FCS error or an alignment error |
rxGoodOctets |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.14
The total number of bytes in all good packets received by a port (excluding framing bits but including FCS). |
rxJabbers |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.10
The number of packets received by a port that are longer than 1522 bytes and have either an FCS error or an alignment error. |
rxMulticastPkts |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.5
The number of good packets received by a port that are directed to the multicast address. This counter does not include error multicast packets or valid broadcast packets. |
rxOctets |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.3
The number of bytes of data received by a port (excluding preamble but including FCS), including bad packets. |
rxOversizePkts |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.8
The number of good packets received by a port that are greater than 1522 bytes inclusive (excluding framing bits but including the FCS). Note that this counter alone will be incremented for packets in the range 1523-1536 bytes inclusive, whereas both this counter and the RxExcessSizeDisc counter will be incremented for packets of 1537 bytes and higher. |
rxPausePkts |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.16
The number of PAUSE frame received by a port. The PAUSE frame must have a valid MAC Control Frame EtherType field (88-08h), have a destination MAC address of either the MAC Control frame reserved multicast address(01-80-c2-00-00-011) or the unique MAC address associated with the specific port, a valid PAUSE Opcode (00-01), be a minimum of 64 bytes in length (excluding preamble but including FCS), and have a valid CRC. Although an 802.3 compliant MAC is only permitted to transmit PAUSE frames when in full duplex mode, with flow control enabled, and with the transfer of PAUSE frames determined by the result of auto-negotiation, an 802.3 MAC receiver is required to count all received PAUSE frames, regardless of its half/full-duplex status. An indication that a MAC is in half-duplex with the RxPausePkts incrementing indicates a non-compliant transmitting device on the network. |
rxSAChanges |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.6
The number of times the SA of good receive packets has changed from the previous value. A count greater than 1 generally indicates the port if connected to a repeater based network. |
rxSymbolErrors |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.17
The total number of times a valid length packet was received at a port and at least one invalid data symbol was detected. Counter only increment once per carrier event and does not increment on detection of collision during the carrier event. |
rxUndersizePkts |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.7
The number of good packets received by a port that are less than 64 bytes long (excluding framing bits but including the FCS). |
rxUnicastPkts |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.11
The number of good packets received by a port that are addressed to a unicast address. |
satellitesTracked |
Object ID: 1.3.6.1.4.1.161.19.3.4.4.8
Current number of satellites that GPS actually tracks. |
satellitesVisible |
Object ID: 1.3.6.1.4.1.161.19.3.4.4.7
Number of satellites the GPS should see. |
sessionTimeout |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.91
Timer for Telnet, Web and FTP sessions. |
siteInfoViewable |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.92
Enable non login users the ability to view Site Information |
snmpAccessSubnet |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.73
SNMP Accessing Subnet 1. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
snmpAccessSubnet10 |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.82
SNMP Accessing Subnet 10. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
snmpAccessSubnet2 |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.74
SNMP Accessing Subnet 2. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
snmpAccessSubnet3 |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.75
SNMP Accessing Subnet 3. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
snmpAccessSubnet4 |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.76
SNMP Accessing Subnet 4. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
snmpAccessSubnet5 |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.77
SNMP Accessing Subnet 5. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
snmpAccessSubnet6 |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.78
SNMP Accessing Subnet 6. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
snmpAccessSubnet7 |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.79
SNMP Accessing Subnet 7. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
snmpAccessSubnet8 |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.80
SNMP Accessing Subnet 8. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
snmpAccessSubnet9 |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.81
SNMP Accessing Subnet 9. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
snmpCommunityString |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.72
SNMP Community String |
snmpReadOnly |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.71
SNMP Permissions 1 - Read Only 0 - Read/Write. |
snmpTrap1 |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.34
SNMP Trap Address 1. |
snmpTrap10 |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.43
SNMP Trap Address 10. |
snmpTrap2 |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.35
SNMP Trap Address 2. |
snmpTrap3 |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.36
SNMP Trap Address 3. |
snmpTrap4 |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.37
SNMP Trap Address 4. |
snmpTrap5 |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.38
SNMP Trap Address 5. |
snmpTrap6 |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.39
SNMP Trap Address 6. |
snmpTrap7 |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.40
SNMP Trap Address 7. |
snmpTrap8 |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.41
SNMP Trap Address 8. |
snmpTrap9 |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.42
SNMP Trap Address 9. |
softwareVersion |
Object ID: 1.3.6.1.4.1.161.19.3.4.4.4
CMM-III software version. It includes the operation system and software build time. |
syncStatus |
Object ID: 1.3.6.1.4.1.161.19.3.4.4.13
CMM-III GPS sync pulse status. |
systemTime |
Object ID: 1.3.6.1.4.1.161.19.3.4.4.5
The current time. |
trackingMode |
Object ID: 1.3.6.1.4.1.161.19.3.4.4.12
CMM-III GPS tracking mode. |
txBroadcastPkts |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.20
The number of good packets transmitted by a port that are directed to a broadcast address. This counter does not include errored broadcast packets or valid multicast packets. |
txCollisions |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.22
The number of collision experienced by a port during packet transmissions. |
txDeferredTransmit |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.26
The number packets successfully transmitted by a port for which the first transmission attempt is delayed because medium is busy. |
txDropPkts |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.18
The total number of good bytes of data transmitted by a port (excluding preamble but including FCS). |
txExcessiveCollision |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.28
The number of packets that are not transmitted from a port because the packet experienced 16 transmission attempts. |
txFrameInDisc |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.30
The number of valid packets received which are discarded by the forwarding process due to lack of space on an output queue. Note: not maintained or reported in the MIB counters. Located in Congestion registers. This attribute only increments if a network device is not acting in compliance with a flow control request, or the BCM5327M internal flow control/buffering scheme has been misconfigured. |
txLateCollision |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.27
The number of times that a collision is detected later than 512 bit-times into the transmission of a packet. |
txMulticastPkts |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.21
The number of good packets transmitted by a port that are directed to a multicast address. This counter does not include errored multicast packets or valid broadcast packets. |
txMultipleCollision |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.25
The number packets successfully transmitted by a port that experienced more than one collision |
txOctets |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.19
The number of good packets received by a port that are directed to the multicast address. This counter does not include error multicast packets or valid broadcast packets. |
txPausePkts |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.29
The number of PAUSE frame transmitted by a port. The MAC resolve to full duplex mode, with 803.3x flow control PAUSE frame exchange enabled at the completion of auto-negotiation. |
txSingleCollision |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.24
The number packets successfully transmitted by a port that experienced exactly one collision. |
txUnicastPkts |
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.23
The number of good packets transmitted by a port that are addressed to a unicast address. |
upTime |
Object ID: 1.3.6.1.4.1.161.19.3.4.4.6
Time since last system reboot. |
uplinkStatus |
Object ID: 1.3.6.1.4.1.161.19.3.4.4.1.1.6
Port Uplink status indicates whether port is configred as an Uplink Port. |
userLoginName |
Object ID: 1.3.6.1.4.1.161.19.3.4.8.1.2
User name. |
userPswd |
Object ID: 1.3.6.1.4.1.161.19.3.4.8.1.3
User password. |
verifyGPSChecksum |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.97
Enable/Disable verification of GPS message checksums. |
vlanTagEnable |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.44
Enable/Disable 802.1Q VLAN tagging.P (1) -- Enable Tagging. (0) -- Disable Tagging. |
vlanTagId |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.45
802.1q VLAN Tag ID, 1-4094. |
webAutoUpdate |
Object ID: 1.3.6.1.4.1.161.19.3.4.3.17
Web page auto update in seconds. 0 means disabled. |
Object Details |
Object ID: 1.3.6.1.4.1.161.19.3.4.8.1.4
Object ID: 1.3.6.1.4.1.161.19.3.4.3.94
Object ID: 1.3.6.1.4.1.161.19.3.4.3.95
Object ID: 1.3.6.1.4.1.161.19.3.4.3.96
Object ID: 1.3.6.1.4.1.161.19.3.4.7.2
Object ID: 1.3.6.1.4.1.161.19.3.4.3.98
Object ID: 1.3.6.1.4.1.161.19.3.4.4.1.1
Object ID: 1.3.6.1.4.1.161.19.3.4.4.1
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1
Object ID: 1.3.6.1.4.1.161.19.3.4.2.4.1
Object ID: 1.3.6.1.4.1.161.19.3.4.2.4
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1
Object ID: 1.3.6.1.4.1.161.19.3.4.8.1
Object ID: 1.3.6.1.4.1.161.19.3.4.8
Object ID: 1.3.6.1.4.1.161.19.3.4.3.4
Object ID: 1.3.6.1.4.1.161.19.3.4.4.2
Object ID: 1.3.6.1.4.1.161.19.3.4.3.13
Object ID: 1.3.6.1.4.1.161.19.3.4.3.15
Object ID: 1.3.6.1.4.1.161.19.3.4.4.1.1.4
Object ID: 1.3.6.1.4.1.161.19.3.4.8.1.1
Object ID: 1.3.6.1.4.1.161.19.3.4.6.1
Object ID: 1.3.6.1.4.1.161.19.3.4.3.14
Object ID: 1.3.6.1.4.1.161.19.3.4.3.16
Object ID: 1.3.6.1.4.1.161.19.3.4.5.7
Object ID: 1.3.6.1.4.1.161.19.3.4.5.3
Object ID: 1.3.6.1.4.1.161.19.3.4.5.6
Object ID: 1.3.6.1.4.1.161.19.3.4.5.10
Object ID: 1.3.6.1.4.1.161.19.3.4.5.8
Object ID: 1.3.6.1.4.1.161.19.3.4.5.9
Object ID: 1.3.6.1.4.1.161.19.3.4.5.13
Object ID: 1.3.6.1.4.1.161.19.3.4.5.12
Object ID: 1.3.6.1.4.1.161.19.3.4.5.11
Object ID: 1.3.6.1.4.1.161.19.3.4.5.5
Object ID: 1.3.6.1.4.1.161.19.3.4.5.4
Object ID: 1.3.6.1.4.1.161.19.3.4.5.2
Object ID: 1.3.6.1.4.1.161.19.3.4.3.1
Object ID: 1.3.6.1.4.1.161.19.3.4.5.1
Object ID: 1.3.6.1.4.1.161.19.3.4.4.11
Object ID: 1.3.6.1.4.1.161.19.3.4.3.93
Object ID: 1.3.6.1.4.1.161.19.3.4.3.2
Object ID: 1.3.6.1.4.1.161.19.3.4.3.3
Object ID: 1.3.6.1.4.1.161.19.3.4.4.9
Object ID: 1.3.6.1.4.1.161.19.3.4.4.1.1.3
Object ID: 1.3.6.1.4.1.161.19.3.4.4.1.1.2
Object ID: 1.3.6.1.4.1.161.19.3.4.4.10
Object ID: 1.3.6.1.4.1.161.19.3.4.4.14
Object ID: 1.3.6.1.4.1.161.19.3.4.4.1.1.7
Object ID: 1.3.6.1.4.1.161.19.3.4.2.4.1.1
Object ID: 1.3.6.1.4.1.161.19.3.4.2.4.1.2
Object ID: 1.3.6.1.4.1.161.19.3.4.2.4.1.3
Object ID: 1.3.6.1.4.1.161.19.3.4.2.3
Object ID: 1.3.6.1.4.1.161.19.3.4.6.2
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.36
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.33
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.34
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.35
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.31
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.32
Object ID: 1.3.6.1.4.1.161.19.3.4.4.3
Object ID: 1.3.6.1.4.1.161.19.3.4.3.18
Object ID: 1.3.6.1.4.1.161.19.3.4.3.26
Object ID: 1.3.6.1.4.1.161.19.3.4.3.83
Object ID: 1.3.6.1.4.1.161.19.3.4.3.5
Object ID: 1.3.6.1.4.1.161.19.3.4.3.63
Object ID: 1.3.6.1.4.1.161.19.3.4.3.46
Object ID: 1.3.6.1.4.1.161.19.3.4.3.55
Object ID: 1.3.6.1.4.1.161.19.3.4.3.19
Object ID: 1.3.6.1.4.1.161.19.3.4.3.27
Object ID: 1.3.6.1.4.1.161.19.3.4.3.84
Object ID: 1.3.6.1.4.1.161.19.3.4.3.6
Object ID: 1.3.6.1.4.1.161.19.3.4.3.64
Object ID: 1.3.6.1.4.1.161.19.3.4.3.47
Object ID: 1.3.6.1.4.1.161.19.3.4.3.56
Object ID: 1.3.6.1.4.1.161.19.3.4.3.20
Object ID: 1.3.6.1.4.1.161.19.3.4.3.28
Object ID: 1.3.6.1.4.1.161.19.3.4.3.85
Object ID: 1.3.6.1.4.1.161.19.3.4.3.7
Object ID: 1.3.6.1.4.1.161.19.3.4.3.65
Object ID: 1.3.6.1.4.1.161.19.3.4.3.48
Object ID: 1.3.6.1.4.1.161.19.3.4.3.57
Object ID: 1.3.6.1.4.1.161.19.3.4.3.21
Object ID: 1.3.6.1.4.1.161.19.3.4.3.29
Object ID: 1.3.6.1.4.1.161.19.3.4.3.86
Object ID: 1.3.6.1.4.1.161.19.3.4.3.8
Object ID: 1.3.6.1.4.1.161.19.3.4.3.66
Object ID: 1.3.6.1.4.1.161.19.3.4.3.49
Object ID: 1.3.6.1.4.1.161.19.3.4.3.58
Object ID: 1.3.6.1.4.1.161.19.3.4.3.22
Object ID: 1.3.6.1.4.1.161.19.3.4.3.30
Object ID: 1.3.6.1.4.1.161.19.3.4.3.87
Object ID: 1.3.6.1.4.1.161.19.3.4.3.9
Object ID: 1.3.6.1.4.1.161.19.3.4.3.67
Object ID: 1.3.6.1.4.1.161.19.3.4.3.50
Object ID: 1.3.6.1.4.1.161.19.3.4.3.59
Object ID: 1.3.6.1.4.1.161.19.3.4.3.23
Object ID: 1.3.6.1.4.1.161.19.3.4.3.31
Object ID: 1.3.6.1.4.1.161.19.3.4.3.88
Object ID: 1.3.6.1.4.1.161.19.3.4.3.10
Object ID: 1.3.6.1.4.1.161.19.3.4.3.68
Object ID: 1.3.6.1.4.1.161.19.3.4.3.51
Object ID: 1.3.6.1.4.1.161.19.3.4.3.60
Object ID: 1.3.6.1.4.1.161.19.3.4.3.24
Object ID: 1.3.6.1.4.1.161.19.3.4.3.32
Object ID: 1.3.6.1.4.1.161.19.3.4.3.89
Object ID: 1.3.6.1.4.1.161.19.3.4.3.11
Object ID: 1.3.6.1.4.1.161.19.3.4.3.69
Object ID: 1.3.6.1.4.1.161.19.3.4.3.52
Object ID: 1.3.6.1.4.1.161.19.3.4.3.61
Object ID: 1.3.6.1.4.1.161.19.3.4.3.25
Object ID: 1.3.6.1.4.1.161.19.3.4.3.33
Object ID: 1.3.6.1.4.1.161.19.3.4.3.90
Object ID: 1.3.6.1.4.1.161.19.3.4.3.12
Object ID: 1.3.6.1.4.1.161.19.3.4.3.70
Object ID: 1.3.6.1.4.1.161.19.3.4.3.53
Object ID: 1.3.6.1.4.1.161.19.3.4.3.62
Object ID: 1.3.6.1.4.1.161.19.3.4.4.1.1.1
Object ID: 1.3.6.1.4.1.161.19.3.4.2.2
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.1
Object ID: 1.3.6.1.4.1.161.19.3.4.4.1.1.5
Object ID: 1.3.6.1.4.1.161.19.3.4.7.1
Object ID: 1.3.6.1.4.1.161.19.3.4.3.54
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.12
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.4
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.2
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.15
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.13
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.9
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.14
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.10
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.5
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.3
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.8
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.16
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.6
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.17
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.7
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.11
Object ID: 1.3.6.1.4.1.161.19.3.4.4.8
Object ID: 1.3.6.1.4.1.161.19.3.4.4.7
Object ID: 1.3.6.1.4.1.161.19.3.4.3.91
Object ID: 1.3.6.1.4.1.161.19.3.4.3.92
Object ID: 1.3.6.1.4.1.161.19.3.4.3.73
Object ID: 1.3.6.1.4.1.161.19.3.4.3.82
Object ID: 1.3.6.1.4.1.161.19.3.4.3.74
Object ID: 1.3.6.1.4.1.161.19.3.4.3.75
Object ID: 1.3.6.1.4.1.161.19.3.4.3.76
Object ID: 1.3.6.1.4.1.161.19.3.4.3.77
Object ID: 1.3.6.1.4.1.161.19.3.4.3.78
Object ID: 1.3.6.1.4.1.161.19.3.4.3.79
Object ID: 1.3.6.1.4.1.161.19.3.4.3.80
Object ID: 1.3.6.1.4.1.161.19.3.4.3.81
Object ID: 1.3.6.1.4.1.161.19.3.4.3.72
Object ID: 1.3.6.1.4.1.161.19.3.4.3.71
Object ID: 1.3.6.1.4.1.161.19.3.4.3.34
Object ID: 1.3.6.1.4.1.161.19.3.4.3.43
Object ID: 1.3.6.1.4.1.161.19.3.4.3.35
Object ID: 1.3.6.1.4.1.161.19.3.4.3.36
Object ID: 1.3.6.1.4.1.161.19.3.4.3.37
Object ID: 1.3.6.1.4.1.161.19.3.4.3.38
Object ID: 1.3.6.1.4.1.161.19.3.4.3.39
Object ID: 1.3.6.1.4.1.161.19.3.4.3.40
Object ID: 1.3.6.1.4.1.161.19.3.4.3.41
Object ID: 1.3.6.1.4.1.161.19.3.4.3.42
Object ID: 1.3.6.1.4.1.161.19.3.4.4.4
Object ID: 1.3.6.1.4.1.161.19.3.4.4.13
Object ID: 1.3.6.1.4.1.161.19.3.4.4.5
Object ID: 1.3.6.1.4.1.161.19.3.4.4.12
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.20
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.22
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.26
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.18
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.28
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.30
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.27
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.21
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.25
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.19
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.29
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.24
Object ID: 1.3.6.1.4.1.161.19.3.4.2.1.1.23
Object ID: 1.3.6.1.4.1.161.19.3.4.4.6
Object ID: 1.3.6.1.4.1.161.19.3.4.4.1.1.6
Object ID: 1.3.6.1.4.1.161.19.3.4.8.1.2
Object ID: 1.3.6.1.4.1.161.19.3.4.8.1.3
Object ID: 1.3.6.1.4.1.161.19.3.4.3.97
Object ID: 1.3.6.1.4.1.161.19.3.4.3.44
Object ID: 1.3.6.1.4.1.161.19.3.4.3.45
Object ID: 1.3.6.1.4.1.161.19.3.4.3.17