MIB File
PMP 320 AP (Basic)
- Module Information:
|
Notification Summary |
| danGenericTrap |
Object ID: 1.3.1.4.1.32584.1.4.1.1.2.3
DAN generic trap, including event info.
|
|
Object Summary |
| danAAAClientPort |
Object ID: 1.3.1.4.1.32584.1.6.1.3
AAA Server port (Client listen on this port)
|
| danAAANasName |
Object ID: 1.3.1.4.1.32584.1.6.1.4
Network access server Name
|
| danAAAServerIP |
Object ID: 1.3.1.4.1.32584.1.6.1.1
IP address of the AAA server
|
| danAAAServerPort |
Object ID: 1.3.1.4.1.32584.1.6.1.2
AAA Server port (Server listen on this port)
|
| danAccountAction |
Object ID: 1.3.1.4.1.32584.1.1.5.1.1.5
Setting the OID to 'createAndWait' will create a new row with the given account name (the provided Index).
Setting the OID to 'active' will perform activation of the related account according to the given:
- danUserName
- danUserLevel
- danUserPassword
- danUserState
Setting the OID to 'desctroy' shall remove the related account.
Returned value of 'notInService' indicate that the relevant account is currently not in use
(e.g. account is in middle of attribute modifications)
|
| danActiveModeScriptFile |
Object ID: 1.3.1.4.1.32584.1.1.7.2
Variable contains the name of configuration Mode script executed as part of the initlization process.
|
| danActiveModeScriptId |
Object ID: 1.3.1.4.1.32584.1.1.7.1
Allow to select the Mode script file to be executed as part of initializing process.
Script file is selected based on the value provided in:
- danSelectedScriptBw
- danSelectedScriptRatio
- danSelectedScriptMap
|
| danActiveUserClient |
Object ID: 1.3.1.4.1.32584.1.1.5.2.1.3
Hold the type of client logged-in to the account one of the following types:
- clientUndefined(1),
- clientSerialCli(2),
- clientTelnetCli(3),
- clientHTTP(4),
- clientSNMP(5)
|
| danActiveUserEntry |
Object ID: 1.3.1.4.1.32584.1.1.5.2.1
Each entry hold information about logged-in user (active account), the entry hold the client type and have
external index to specific account-username
|
| danActiveUserInx |
Object ID: 1.3.1.4.1.32584.1.1.5.2.1.1
Active user index
|
| danActiveUserName |
Object ID: 1.3.1.4.1.32584.1.1.5.2.1.2
Username for this active user
|
| danActiveUserTable |
Object ID: 1.3.1.4.1.32584.1.1.5.2
Table maintains all active (logged-in) users
|
| danAgingTimeout |
Object ID: 1.3.1.4.1.32584.1.9.5
Integer. Aging timeout in seconds. Default value is 300.
|
| danAlarmGenericDeviceId |
Object ID: 1.3.1.4.1.32584.1.4.1.2.1.1.1
Description.
|
| danAlarmGenericEntry |
Object ID: 1.3.1.4.1.32584.1.4.1.2.1.1
Every entry in the table reflects an Alarm.
|
| danAlarmGenericTable |
Object ID: 1.3.1.4.1.32584.1.4.1.2.1
All active alarms in the system with thier attributes
|
| danBSAuthSsEntry |
Object ID: 1.3.1.4.1.32584.1.7.4.4.1
MAC addresses that are admitted to enter the network. It is used when AP is running in standalone mode
(in the integrated mode SMs are authorized on the fly by AAA server)
|
| danBSAuthSsTable |
Object ID: 1.3.1.4.1.32584.1.7.4.4
MAC addresses that are admitted to enter the network. It is used when AP is running in standalone mode
(in the integrated mode SMs are authorized on the fly by AAA server)
|
| danBackupResCommand |
Object ID: 1.3.1.4.1.32584.1.3.2.3.3
This variable specifies backup command:
configExport(0) - performs exporting of configuration parameters to specified location
configImport(1) - performs importing of configuration parameters from specified location
exportDB(2) - performs exporting of data bases configuration to specified location
importDB(3) - performs importing of data bases configuration from specified location
|
| danBackupResDev |
Object ID: 1.3.1.4.1.32584.1.3.2.3.1
The variable specifies backup devices used:
devFtp(0) - FTP
devTftp(1) - TFTP
|
| danBackupResPath |
Object ID: 1.3.1.4.1.32584.1.3.2.3.2
The variable specifies backup file path (excluding the device , which specifed by danbackupResDev)
For example : cfg.txt
|
| danBackupResStatus |
Object ID: 1.3.1.4.1.32584.1.3.2.3.4
Provides status of last performed danBackupResCommand
0 - success
Otherwise - error
|
| danBandWidthRngCode |
Object ID: 1.3.1.4.1.32584.1.2.7.4
Number of Bandwidth Request ranging codes. Possible values are
from 0 to 255.
|
| danBsActSfClassPrf |
Object ID: 1.3.1.4.1.32584.1.7.3.1.1.5
Classification rule ID
|
| danBsActSfDirection |
Object ID: 1.3.1.4.1.32584.1.7.3.1.1.3
0-Downlink, 1-Uplink
|
| danBsActSfId |
Object ID: 1.3.1.4.1.32584.1.7.3.1.1.2
Unique Global SF index
|
| danBsActSfQoSPrf |
Object ID: 1.3.1.4.1.32584.1.7.3.1.1.4
QoS profile ID
|
| danBsActSfRoutePrf |
Object ID: 1.3.1.4.1.32584.1.7.3.1.1.6
Route rule ID
|
| danBsActSsMacAddr |
Object ID: 1.3.1.4.1.32584.1.7.3.1.1.1
SM MAC address, as a key of the table
|
| danBsActiveSFCount |
Object ID: 1.3.1.4.1.32584.1.7.5
This OID represents the Active Service Flow count.
|
| danBsActiveSFEntry |
Object ID: 1.3.1.4.1.32584.1.7.3.1.1
Following table defines the Authorized Service flows .
Note: these service flows will be defined in addition to default user profile
|
| danBsActiveSFTable |
Object ID: 1.3.1.4.1.32584.1.7.3.1
Following table defines the Authorized Service flows .
Note: these service flows will be defined in addition to default user profile
|
| danBsAuthSsMacAddr |
Object ID: 1.3.1.4.1.32584.1.7.4.4.1.1
MAC address of the SM. This MAC address is transmitted by the SM during ranging phase of the NE.
|
| danBsAuthSsRowStatus |
Object ID: 1.3.1.4.1.32584.1.7.4.4.1.2
Allow to control the row, e.g. enable, disable, delete
|
| danBsDlChannelCinrStream0 |
Object ID: 1.3.1.4.1.32584.1.8.3.1.4
Reported CINR Stream-0
|
| danBsDlChannelCinrStream1 |
Object ID: 1.3.1.4.1.32584.1.8.3.1.6
Reported CINR Stream-1
|
| danBsDlChannelMac |
Object ID: 1.3.1.4.1.32584.1.8.3.1.1
MSS MAC address
|
| danBsDlChannelMeasurementEntry |
Object ID: 1.3.1.4.1.32584.1.8.3.1
Measueremt for Down-link channel (as reported by the MSS). Each entery is per MSS
|
| danBsDlChannelMeasurementTable |
Object ID: 1.3.1.4.1.32584.1.8.3
Measueremt for Down-link channel (as reported by the MSS). Each entery is per MSS
|
| danBsDlChannelPollMode |
Object ID: 1.3.1.4.1.32584.1.8.3.1.2
Polling method:
- MSRP
- CQICH
|
| danBsDlChannelRssiStream0 |
Object ID: 1.3.1.4.1.32584.1.8.3.1.3
Reported RSSI Stream-0
|
| danBsDlChannelRssiStream1 |
Object ID: 1.3.1.4.1.32584.1.8.3.1.5
Reported RSSI Stream-1
|
| danBsDlMcs16Qam12MimoACount |
Object ID: 1.3.1.4.1.32584.1.8.6.1.9
Total number of bytes sent in the downlink, in MCS state '16QAM 1/2 MIMO A'.
|
| danBsDlMcs16Qam34MimoACount |
Object ID: 1.3.1.4.1.32584.1.8.6.1.8
Total number of bytes sent in the downlink, in MCS state '16QAM 3/4 MIMO A'.
|
| danBsDlMcs64Qam12MimoACount |
Object ID: 1.3.1.4.1.32584.1.8.6.1.7
Total number of bytes sent in the downlink, in MCS state '64QAM 1/2 MIMO A'.
|
| danBsDlMcs64Qam23MimoACount |
Object ID: 1.3.1.4.1.32584.1.8.6.1.6
Total number of bytes sent in the downlink, in MCS state '64QAM 2/3 MIMO A'.
|
| danBsDlMcs64Qam34MimoACount |
Object ID: 1.3.1.4.1.32584.1.8.6.1.5
Total number of bytes sent in the downlink, in MCS state '64QAM 3/4 MIMO A'.
|
| danBsDlMcs64Qam56MimoACount |
Object ID: 1.3.1.4.1.32584.1.8.6.1.4
Total number of bytes sent in the downlink, in MCS state '64QAM 5/6 MIMO A'.
|
| danBsDlMcs64Qam56MimoBCount |
Object ID: 1.3.1.4.1.32584.1.8.6.1.3
Total number of bytes sent in the downlink, in MCS state '64QAM 5/6 MIMO B'.
|
| danBsDlMcsEntry |
Object ID: 1.3.1.4.1.32584.1.8.6.1
Each entry refers to unique MSS and SFID registered to the BS.
|
| danBsDlMcsMacAddr |
Object ID: 1.3.1.4.1.32584.1.8.6.1.1
MAC Address of a registered MSS.
|
| danBsDlMcsQpsk12MimoACount |
Object ID: 1.3.1.4.1.32584.1.8.6.1.11
Total number of bytes sent in the downlink, in MCS state 'QPSK 1/2 MIMO A'.
|
| danBsDlMcsQpsk34MimoACount |
Object ID: 1.3.1.4.1.32584.1.8.6.1.10
Total number of bytes sent in the downlink, in MCS state 'QPSK 3/4 MIMO A'.
|
| danBsDlMcsSfId |
Object ID: 1.3.1.4.1.32584.1.8.6.1.2
SFID of the subscriber.
|
| danBsDlMcsTable |
Object ID: 1.3.1.4.1.32584.1.8.6
This table contains Downlink MCS counters, for each registered MSS.
|
| danBsIdentitySel |
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.3
Select which Identity to use as part of Event message in the Mac address field.
- idSelWmanMac: Use Boards Wman MAC address
- idSelGmacMac: Use Boards Gmac MAC address
- idSelMmacMac: Use Boards Mmac MAC address
- idSelBsId: Use Boards BsId (also 6 bytes)
|
| danBsL2MacLearned |
Object ID: 1.3.1.4.1.32584.1.8.5.1
32 bit number.
Contains the total number of active Mac addressed
learned by the AP acting as a learning bridge.
Valid range is from 0 to 6000 entries.
|
| danBsL2MacLearnedEntry |
Object ID: 1.3.1.4.1.32584.1.8.5.4.1
Description.
|
| danBsL2MacLearnedTable |
Object ID: 1.3.1.4.1.32584.1.8.5.4
The table contains an entry for each learned MAC address (Ethernet station)
|
| danBsL2MssId |
Object ID: 1.3.1.4.1.32584.1.8.5.4.1.1
SM MAC address
|
| danBsL2MssLearnedAddr |
Object ID: 1.3.1.4.1.32584.1.8.5.4.1.2
Learned MAC address
|
| danBsL2MssLearnedTime |
Object ID: 1.3.1.4.1.32584.1.8.5.4.1.3
Time interval since last packet from this station has been received
|
| danBsL2NonAssocMacBcst |
Object ID: 1.3.1.4.1.32584.1.8.5.3
32 bit number.
Contains the total number of non-associated packets broadcast.
This is relevant when configured to broadcast non-associated dest Macs addresses.
Valid range is 32bit number.
|
| danBsL2NonAssocMacDrop |
Object ID: 1.3.1.4.1.32584.1.8.5.2
32 bit number.
Contains the total number of non-associated packets dropped.
This is relevant when configured to drop non-associated dest Macs addresses.
Valid range is 32bit number.
|
| danBsMcsMacAddr |
Object ID: 1.3.1.4.1.32584.1.8.16.1.1
Unique MAC Address of a registered BS.
|
| danBsMcsStateDl |
Object ID: 1.3.1.4.1.32584.1.8.16.1.2
MCS State in the Downlink.
|
| danBsMcsStateDlAntMethod |
Object ID: 1.3.1.4.1.32584.1.8.16.1.3
Antenna Method in the Downlink.
|
| danBsMcsStateDlCinr |
Object ID: 1.3.1.4.1.32584.1.8.16.1.4
Downlink Physical CINR.
|
| danBsMcsStateEntry |
Object ID: 1.3.1.4.1.32584.1.8.16.1
Each entry represents a unique registered BS.
|
| danBsMcsStateTable |
Object ID: 1.3.1.4.1.32584.1.8.16
Each entry of this table represents the MAC Address of a registered BS, The DL & UL MCS State and Antenna Method.
|
| danBsMcsStateUl |
Object ID: 1.3.1.4.1.32584.1.8.16.1.5
MCS State in the Uplink.
|
| danBsMcsStateUlAntMethod |
Object ID: 1.3.1.4.1.32584.1.8.16.1.6
Antenna Method in the Uplink.
|
| danBsProvClsProfileIndex |
Object ID: 1.3.1.4.1.32584.1.7.4.2.1.1
A profile index of the classifier profile
|
| danBsProvClsProfileType |
Object ID: 1.3.1.4.1.32584.1.7.4.2.1.3
One of the supported classification types:
1. ipTos(1),
2. ipMaskedSrcAddr(3),
3. ipMaskedDestAddr(4),
4. destMacAddr(7),
5. srcMacAddr(8),
6. vlanPriority(10),
7. vlanId(11)
|
| danBsProvClsRuleEntry |
Object ID: 1.3.1.4.1.32584.1.7.4.2.1
This table provides one row for each packet classifier
rule.
|
| danBsProvClsRuleIndex |
Object ID: 1.3.1.4.1.32584.1.7.4.2.1.2
Rule index, the rule index is unique. Several rule may be assiciated with a single profile
|
| danBsProvClsRuleIpDscp |
Object ID: 1.3.1.4.1.32584.1.7.4.2.1.4
The low value of a range of TOS byte values. If the
referenced parameter is not present in a classifier, this
object reports the value of 0.
|
| danBsProvClsRuleIpSrcAddr |
Object ID: 1.3.1.4.1.32584.1.7.4.2.1.5
This object specifies the value of the IP Source Address
required for packets to match this rule. An IP packet
matches the rule when the packet ip source address bitwise
ANDed with the wmanIf2fBsProvClsfRuleIpSrcMask value
equals the wmanIf2fBsProvClsfRuleIpSrcAddr value.
If the referenced parameter is not present in a classifier,
this object reports the value of 0.0.0.0.
|
| danBsProvClsRuleIpSrcMask |
Object ID: 1.3.1.4.1.32584.1.7.4.2.1.6
This object specifies which bits of a packet's IP Source
Address that are compared to match this rule. An IP packet
matches the rule when the packet source address bitwise
ANDed with the
wmanIf2fBsProvClsfRuleIpSrcMask value equals the
wmanIf2fBsProvClsfRuleIpSrcAddr value.
If the referenced parameter is not present in a classifier,
this object reports the value of 0.0.0.0.
|
| danBsProvClsRuleMacDestAddr |
Object ID: 1.3.1.4.1.32584.1.7.4.2.1.11
This object specifies the value of the Mac Destination Address required for packets t
o match this rule. If the referenced parameter
is not present in a classifier, this object reports the value of 0:0:0:0:0:0.
|
| danBsProvClsRuleMacSrcAddr |
Object ID: 1.3.1.4.1.32584.1.7.4.2.1.10
This object specifies the value of the Mac Source Address required for packets to match this rule.
f the referenced parameter is not present in a classifier, this object reports the value of 0:0:0:0:0:0.
|
| danBsProvClsRuleRowStatus |
Object ID: 1.3.1.4.1.32584.1.7.4.2.1.20
This object is used to create a new row or modify or
delete an existing row in this table.
If the implementator of this MIB has choosen not
to implement 'dynamic assignment' of profiles, this
object is not useful and should return noSuchName
upon SNMP request.
|
| danBsProvClsRuleTable |
Object ID: 1.3.1.4.1.32584.1.7.4.2
This table contains provisioned classifier rules associated
with service flows.
|
| danBsProvClsRuleVlanId |
Object ID: 1.3.1.4.1.32584.1.7.4.2.1.7
This object applies only to Ethernet frames using the
802.1P/Q tag header.
If this object's value is nonzero, tagged packets must
have a VLAN Identifier that matches the value in order
to match the rule.
Only the least significant 12 bits of this object's
value are valid.
If the referenced parameter is not present in the
classifier, the value of this object is reported as 0.
|
| danBsProvClsRuleVlanPri |
Object ID: 1.3.1.4.1.32584.1.7.4.2.1.9
This object applies only to Ethernet frames using the 802.1P/Q tag heade.
If this object's value is nonzero, tagged packets must have a VLAN PCP (priority) that matches the value
in order to match the rule. Only the 3 User priority bis of this object's value are valid. If the referenced parameter
is not present in the classifier, the value of this object is reported as 0.
This classifier is only applicable in Layer-2 operation mode.
|
| danBsProvSfClsPrf |
Object ID: 1.3.1.4.1.32584.1.7.4.3.1.5
Classification rule ID, an entry in 'danIf2fBsProvClassifierProfileTable'
|
| danBsProvSfDirection |
Object ID: 1.3.1.4.1.32584.1.7.4.3.1.3
0-Downlink, 1-Uplink
|
| danBsProvSfEntry |
Object ID: 1.3.1.4.1.32584.1.7.4.3.1
FEntry defines the Authorized Service flows to be automatically provisioned by AP in standalone system mode.
Note: these service flows will be defined in addition to default user profile
|
| danBsProvSfId |
Object ID: 1.3.1.4.1.32584.1.7.4.3.1.7
This is Service Flow Id unique in BS scope
|
| danBsProvSfIndex |
Object ID: 1.3.1.4.1.32584.1.7.4.3.1.2
SF index in SM context as added into the table (danBsProvSfIndex + danBsProvSsMacAddr) form a unique table index
|
| danBsProvSfQoSPrf |
Object ID: 1.3.1.4.1.32584.1.7.4.3.1.4
QoS profile ID
|
| danBsProvSfRouteDirection |
Object ID: 1.3.1.4.1.32584.1.7.4.6.1.12
0-Downlink, 1-Uplink
|
| danBsProvSfRouteEntry |
Object ID: 1.3.1.4.1.32584.1.7.4.6.1
This table provides one row for each packet classifier
rule.
|
| danBsProvSfRoutePrf |
Object ID: 1.3.1.4.1.32584.1.7.4.3.1.6
For future usage Classification rule ID, an entry in 'danBsProvSfRouteTable', use value 0
|
| danBsProvSfRouteProfileIndex |
Object ID: 1.3.1.4.1.32584.1.7.4.6.1.1
A unique index of the route profile
|
| danBsProvSfRouteRuleGre |
Object ID: 1.3.1.4.1.32584.1.7.4.6.1.11
Description.
|
| danBsProvSfRouteRuleIndex |
Object ID: 1.3.1.4.1.32584.1.7.4.6.1.2
Roue rule Index
|
| danBsProvSfRouteRuleIpAddr |
Object ID: 1.3.1.4.1.32584.1.7.4.6.1.6
This object specifies the value of the IP Source Address
required for packets to match this rule. An IP packet
matches the rule when the packet ip source address bitwise
ANDed with the wmanIf2fBsProvClsfRuleIpSrcMask value
equals the wmanIf2fBsProvClsfRuleIpSrcAddr value.
If the referenced parameter is not present in a classifier,
this object reports the value of 0.0.0.0.
|
| danBsProvSfRouteRuleIpDscp |
Object ID: 1.3.1.4.1.32584.1.7.4.6.1.4
The dcsp value of the TOS byte values. If the
referenced parameter is not present in a classifier, this
object reports the value of 0.
|
| danBsProvSfRouteRuleIpMask |
Object ID: 1.3.1.4.1.32584.1.7.4.6.1.7
This object specifies which bits of a packet's IP Source
Address that are compared to match this rule. An IP packet
matches the rule when the packet source address bitwise
ANDed with the
wmanIf2fBsProvClsfRuleIpSrcMask value equals the
wmanIf2fBsProvClsfRuleIpSrcAddr value.
If the referenced parameter is not present in a classifier,
this object reports the value of 0.0.0.0.
|
| danBsProvSfRouteRuleMacAddr |
Object ID: 1.3.1.4.1.32584.1.7.4.6.1.10
MAC address associated with Rule Map routeDestMacAddr
|
| danBsProvSfRouteRuleMap |
Object ID: 1.3.1.4.1.32584.1.7.4.6.1.3
Define the route type applicable to the specific row, type value is one of the followings:
- routeMaskedDestAddr(1),
- routeMaskedSrcAddr(2),
- routeIpTos(3),
- routeVlanId(4),
- routeUdpDestPorts(5),
- routeUdpSrcPorts(6),
- routeTcpDestPorts(7),
- routeTcpSrcPorts(8),
- routeDestMacAddr(9),
- routeGre(10)
|
| danBsProvSfRouteRuleMaxPort |
Object ID: 1.3.1.4.1.32584.1.7.4.6.1.9
The maximumport number associated with port range, relevant for rule maps
- routeUdpDestPorts(5),
- routeUdpSrcPorts(6),
- routeTcpDestPorts(7),
- routeTcpSrcPorts(8),
|
| danBsProvSfRouteRuleMinPort |
Object ID: 1.3.1.4.1.32584.1.7.4.6.1.8
The minimum port number associated with port range, relevant for rule maps
- routeUdpDestPorts(5),
- routeUdpSrcPorts(6),
- routeTcpDestPorts(7),
- routeTcpSrcPorts(8),
|
| danBsProvSfRouteRuleRowStatus |
Object ID: 1.3.1.4.1.32584.1.7.4.6.1.14
This object is used to create a new row or modify or
delete an existing row in this table.
If the implementator of this MIB has choosen not
to implement 'dynamic assignment' of profiles, this
object is not useful and should return noSuchName
upon SNMP request.
|
| danBsProvSfRouteRuleVlanId |
Object ID: 1.3.1.4.1.32584.1.7.4.6.1.5
This object applies only to Ethernet frames using the
802.1P/Q tag header.
If this object's value is nonzero, tagged packets must
have a VLAN Identifier that matches the value in order
to match the rule.
Only the least significant 12 bits of this object's
value are valid.
If the referenced parameter is not present in the
classifier, the value of this object is reported as 0.
|
| danBsProvSfRouteTable |
Object ID: 1.3.1.4.1.32584.1.7.4.6
This table contains provisioned classifier rules associated
with service flows.
|
| danBsProvSfRouteUsageStat |
Object ID: 1.3.1.4.1.32584.1.7.4.6.1.13
Indicate the actual Usage status of this rule as Pending or Active
|
| danBsProvSfRowStatus |
Object ID: 1.3.1.4.1.32584.1.7.4.3.1.8
Allow to control the row, e.g. enable, disable, delete
|
| danBsProvSfTable |
Object ID: 1.3.1.4.1.32584.1.7.4.3
Following table defines the Authorized Service flows to be automatically provisioned by AP in standalone system mode.
Note: these service flows will be defined in addition to default user profile
|
| danBsProvSsMacAddr |
Object ID: 1.3.1.4.1.32584.1.7.4.3.1.1
SM MAC address, as a key of the table
|
| danBsSfClsVlanGlobalMask |
Object ID: 1.3.1.4.1.32584.1.7.1.4
Description.
|
| danBsSfDefaultDlQosProfile |
Object ID: 1.3.1.4.1.32584.1.7.1.2
Set the Default DL QoS profile used when a new intial default connection is made
|
| danBsSfDefaultUlQosProfile |
Object ID: 1.3.1.4.1.32584.1.7.1.3
Set the Default UL QoS profile used when a new intial default connection is made
|
| danBsSfMccQosProfileCir |
Object ID: 1.3.1.4.1.32584.1.7.1.6
Set the MIR value for MCC QoS profile
|
| danBsSfMccQosProfileMir |
Object ID: 1.3.1.4.1.32584.1.7.1.5
Set the MIR value for MCC QoS profile
|
| danBsSfRoutingMode |
Object ID: 1.3.1.4.1.32584.1.7.1.1
Routing mode (R/O)
|
| danBsUlChannelCinrStream0 |
Object ID: 1.3.1.4.1.32584.1.8.2.1.5
Measured stream-0 CINR
|
| danBsUlChannelCinrStream1 |
Object ID: 1.3.1.4.1.32584.1.8.2.1.7
Measured stream-1 CINR
|
| danBsUlChannelMac |
Object ID: 1.3.1.4.1.32584.1.8.2.1.1
MSS MAC address
|
| danBsUlChannelMeasurementEntry |
Object ID: 1.3.1.4.1.32584.1.8.2.1
Measueremt for Uplink channel (as measured by the BS). Each entery is per MSS and Radio
|
| danBsUlChannelMeasurementTable |
Object ID: 1.3.1.4.1.32584.1.8.2
Measueremt for Uplink channel (as measured by the BS). Each entery is per MSS and Radio
|
| danBsUlChannelRadioIndex |
Object ID: 1.3.1.4.1.32584.1.8.2.1.2
Radio (Antenna) Index
|
| danBsUlChannelRssiStream0 |
Object ID: 1.3.1.4.1.32584.1.8.2.1.4
Measured stream-0 RSSI
|
| danBsUlChannelRssiStream1 |
Object ID: 1.3.1.4.1.32584.1.8.2.1.6
Measured stream-1 RSSI
|
| danBsUlMcs16Qam12Count |
Object ID: 1.3.1.4.1.32584.1.8.7.1.8
Total number of bytes sent in the uplink, in MCS state '16QAM 1/2'.
|
| danBsUlMcs16Qam34Count |
Object ID: 1.3.1.4.1.32584.1.8.7.1.7
Total number of bytes sent in the uplink, in MCS state '16QAM 3/4'.
|
| danBsUlMcs64Qam12Count |
Object ID: 1.3.1.4.1.32584.1.8.7.1.6
Total number of bytes sent in the uplink, in MCS state '64QAM 1/2'.
|
| danBsUlMcs64Qam23Count |
Object ID: 1.3.1.4.1.32584.1.8.7.1.5
Total number of bytes sent in the uplink, in MCS state '64QAM 2/3'.
|
| danBsUlMcs64Qam34Count |
Object ID: 1.3.1.4.1.32584.1.8.7.1.4
Total number of bytes sent in the uplink, in MCS state '64QAM 3/4'.
|
| danBsUlMcs64Qam56Count |
Object ID: 1.3.1.4.1.32584.1.8.7.1.3
Total number of bytes sent in the uplink, in MCS state '64QAM 5/6'.
|
| danBsUlMcsEntry |
Object ID: 1.3.1.4.1.32584.1.8.7.1
Each entry refers to unique MSS registered to the BS.
|
| danBsUlMcsMacAddr |
Object ID: 1.3.1.4.1.32584.1.8.7.1.1
MAC Address of a registered MSS.
|
| danBsUlMcsQpsk12Count |
Object ID: 1.3.1.4.1.32584.1.8.7.1.10
Total number of bytes sent in the uplink, in MCS state 'QPSK 1/2'.
|
| danBsUlMcsQpsk34Count |
Object ID: 1.3.1.4.1.32584.1.8.7.1.9
Total number of bytes sent in the uplink, in MCS state 'QPSK 3/4'.
|
| danBsUlMcsSfId |
Object ID: 1.3.1.4.1.32584.1.8.7.1.2
Total number of bytes sent in the uplink, in MCS state '64QAM 5/6'.
|
| danBsUlMcsTable |
Object ID: 1.3.1.4.1.32584.1.8.7
This table contains Uplink MCS counters, for each registered MSS.
|
| danBsUsageRecordBytesCount |
Object ID: 1.3.1.4.1.32584.1.8.1.1.5
Total bytes count for the given MSS and SF ID
|
| danBsUsageRecordBytesDropped |
Object ID: 1.3.1.4.1.32584.1.8.1.1.7
Total bytes dropped for the given MSS and SF ID
|
| danBsUsageRecordCid |
Object ID: 1.3.1.4.1.32584.1.8.1.1.3
Connection Identifier for this entry
|
| danBsUsageRecordEntry |
Object ID: 1.3.1.4.1.32584.1.8.1.1
Performance Monitoring table, each entry represent MSS and its Service Flow
|
| danBsUsageRecordMacAddr |
Object ID: 1.3.1.4.1.32584.1.8.1.1.1
MSS MAC address
|
| danBsUsageRecordPcktsCount |
Object ID: 1.3.1.4.1.32584.1.8.1.1.4
Total packeges count for the given MSS and SF ID
|
| danBsUsageRecordPcktsDropped |
Object ID: 1.3.1.4.1.32584.1.8.1.1.6
Total packages dropped for the given MSS and SF ID
|
| danBsUsageRecordSfId |
Object ID: 1.3.1.4.1.32584.1.8.1.1.2
Service Flow Id
|
| danBsUsageRecordTable |
Object ID: 1.3.1.4.1.32584.1.8.1
Performance Monitoring table, each entry represent MSS and its Service Flow
|
| danC2nBase |
Object ID: 1.3.1.4.1.32584.1.2.3.1
C/N base configuration
Note:
-------
1. The Value of wmanIf2BsCmnPhyMaxEirp is affected from danRFAntennaGain, i.e.
when one of that parameter is configured the MaxEIRP will reflect the change.
MaxEirp is calculated according to the following equation:
maxEirp = Min((danC2nBase + 15), -60) - danRFAntennaGain
danRFPout and danRFAntennaGain are of the 'firts' (the lowe index radio) mouned radio
2. The LM nominal power is also affected by the setting of danC2nBase according to the
following equation:
LM_power_nominal = 120 + danC2nBase + 87)*4);
|
| danCenterFreq |
Object ID: 1.3.1.4.1.32584.1.1.4.3
Setting danCenterFrequencywill result in changing the frequency of all mounted Radios.
|
| danClearCounters |
Object ID: 1.3.1.4.1.32584.1.8.4
Setting this OID to cmdClear shall clear all Service flow counters.
When it is read the value cmdNone is always returned
|
| danClearStats |
Object ID: 1.3.1.4.1.32584.1.8.15
Resets the DL MCS, stats to zero.
|
| danConfigurationStatus |
Object ID: 1.3.1.4.1.32584.1.3.2.1
The variable provide status information about the system's configuration parameters.
configSynced(1) - Indicate that the software currently running is in full sync with the configuration parameters saved in the non-volatile memory (flash)
configNotSyncedUpdated(2) - Indicate that the software currently running is NOT in sync with the configuration parameters saved in the non-volatile memory, but the modified attributes
are saved in the non-voletile memory(will be affective on the next system startup).
configNotSyncedNotUpdated(3) - Indicate that the software currently running is NOT in sync with the configuration parameters saved in the non-volatile memory, and there are attributes
modified in the RAM (shadow) and not yet saved in the non-volatile memory.
configSave(4) - Command the system to save all attributes from the RAM (shadow) to the non-volatile memory.
|
| danDNSPrimary |
Object ID: 1.3.1.4.1.32584.1.1.2.6
The IP address of the Primary DNS server
|
| danDNSSecondary |
Object ID: 1.3.1.4.1.32584.1.1.2.7
Description.
|
| danDNSStatus |
Object ID: 1.3.1.4.1.32584.1.1.2.8
Disable DNS unctionality (true if telnet is disabled)
|
| danDefaultGateway |
Object ID: 1.3.1.4.1.32584.1.1.2.2
AP default gateway
|
| danDevBsCertificateEnable |
Object ID: 1.3.1.4.1.32584.1.3.9.1.1.8
Status of the certificate.
|
| danDevBsCertificateEntry |
Object ID: 1.3.1.4.1.32584.1.3.9.1.1
Certificate Management entry per registerd certificate.
|
| danDevBsCertificateExpiration |
Object ID: 1.3.1.4.1.32584.1.3.9.1.1.5
Displays the expiration date of the certificate.
|
| danDevBsCertificateFingerprint |
Object ID: 1.3.1.4.1.32584.1.3.9.1.1.4
Displays the fingerprint of the certificate
calculated on the certificate itself.
|
| danDevBsCertificateIndex |
Object ID: 1.3.1.4.1.32584.1.3.9.1.1.1
Index of the Certificate Table.
|
| danDevBsCertificateIssuer |
Object ID: 1.3.1.4.1.32584.1.3.9.1.1.3
Displays the common name of the certificate
issuer as described in the x509 issuer field.
|
| danDevBsCertificateName |
Object ID: 1.3.1.4.1.32584.1.3.9.1.1.2
Displays the common name of the certificate as
described in the x509 subject field.
|
| danDevBsCertificateServiceflag |
Object ID: 1.3.1.4.1.32584.1.3.9.1.1.7
Displays the service flag of the certificate. This
signifies which services the certificate will be
associated to. The expected value for this object are:
1 - HTTPS
2 - AAA
3 - HTTPS + AAA
|
| danDevBsCertificateTable |
Object ID: 1.3.1.4.1.32584.1.3.9.1
Certificate Management table. Each entry in the
table refers to one registered certificate.
|
| danDevBsCertificateType |
Object ID: 1.3.1.4.1.32584.1.3.9.1.1.6
Type of certificate like:
Server Certificate,
Intermediate CA Certificate,
Root CA Certificate.
|
| danDevBsCurrentSwVersion |
Object ID: 1.3.1.4.1.32584.1.3.1.1
This value identifies the version of software currently running in the BS.
After the downloaded software being successfully activated, the BS shall copy wmanDevBsDownloadSwVersion
into wmanDevBsCurrentSwVersion
|
| danDevBsDownloadSwVersion |
Object ID: 1.3.1.4.1.32584.1.3.1.3
This value identifies the version upgrade script file name
|
| danDevBsHttpsPortNumber |
Object ID: 1.3.1.4.1.32584.1.1.2.17
This R/W determines the port number to be used by the HTTPS application. Default HTTPS port is 443.
|
| danDevBsInactiveSwVersion |
Object ID: 1.3.1.4.1.32584.1.3.1.2
This value identifies the version of inactive software.
When rollback command is activated the BS shall activate this version.
|
| danDevBsSWUpgradeCommand |
Object ID: 1.3.1.4.1.32584.1.3.1.7
Setting this value to 'upgrade' causes the BS to initiate
the software download from a server (e.g. software image
server) based on the setting of:
- danDevBsDownloadSwVersion
- danDevBsSoftwareLocation
The status and progress precentage are provided by:
- danDevBsSoftwareUpgradeAdminStatus (ready, downloading, installing, error)
- danDevBsSoftwareProgress
Setting this value to 'reset' will restart the BS with the current SW version as indicated by danDevBsCurrentSwVersion.
Setting this value to 'rollback' will restart the BS running the Inactive SW version as indicated by danDevBsInactiveSwVersion.
|
| danDevBsSoftwareLocation |
Object ID: 1.3.1.4.1.32584.1.3.1.4
Holds the URL (protocol, IP address, location) where configuration file is to be downloaded from.
E.g. (tftp://192.168.1.1/AP/).
|
| danDevBsSoftwareProgress |
Object ID: 1.3.1.4.1.32584.1.3.1.5
Indicate the progress status in precentage
|
| danDevBsSoftwareUpgradeAdminStatus |
Object ID: 1.3.1.4.1.32584.1.3.1.6
Reading this object returns
the last operation. The download and activation procedure
is vendor specific which will not be defined in this
standard.
|
| danDevInfoFrameUtilAvgDlUnusedSlots |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.31
Average unsued DL slots per frame during the
danDevInfoFrameUtilInterval frames duration.
|
| danDevInfoFrameUtilAvgUlUnusedSlots |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.32
Average unsued UL slots per frame during the
danDevInfoFrameUtilInterval farmes duration.
|
| danDevInfoFrameUtilCollection |
Object ID: 1.3.1.4.1.32584.1.3.4.7
Start and Stop operation for the Frame Utilization
feature that is based on the Number of Frames and
Repetition rate.
|
| danDevInfoFrameUtilDLSlotsUsed |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.3
Number of DL slots used in the
danDevInfoMeasureSlotsCmd frames not including
MAP and FCH
|
| danDevInfoFrameUtilDl16QAM12 |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.16
Percentage of DL slots modulated with 16QAM 1/2
using MIMO-A diversity
|
| danDevInfoFrameUtilDl16QAM34 |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.15
Percentage of DL slots modulated with 16QAM 3/4
using MIMO-A diversity
|
| danDevInfoFrameUtilDl64QAM12 |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.14
Percentage of DL slots modulated with 64QAM 1/2
using MIMO-A diversity
|
| danDevInfoFrameUtilDl64QAM23 |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.13
Percentage of DL slots modulated with 64QAM 2/3
using MIMO-A diversity
|
| danDevInfoFrameUtilDl64QAM34 |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.12
Percentage of DL slots modulated with 64QAM 3/4
using MIMO-A diversity
|
| danDevInfoFrameUtilDl64QAM56 |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.11
Percentage of DL slots modulated with 64QAM 5/6
using MIMO-A diversity
|
| danDevInfoFrameUtilDl64QAM56MimoB |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.10
Percentage of DL slots modulated with 64QAM 5/6
using MIMO-B diversity
|
| danDevInfoFrameUtilDlAvgMCS |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.29
Average DL MCS (modulation and coding scheme)
(in bits/slot units) utilized during the
danDevInfoFrameUtilInterval frames duration.
|
| danDevInfoFrameUtilDlQPSK12 |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.18
Percentage of DL slots modulated with QPSK 1/2 using MIMO-A diversity.
|
| danDevInfoFrameUtilDlQPSK34 |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.17
Percentage of DL slots modulated with QPSK 3/4
using MIMO-A diversity.
|
| danDevInfoFrameUtilDlThroughput |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.27
Over the air DL throughput in bps during the
danDevInfoFrameUtilInterval frames duration.
|
| danDevInfoFrameUtilEntry |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1
Frame Utilization Table Entry.
|
| danDevInfoFrameUtilMapFull |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.9
Number of frames (out of danDevInfoMeasureSlotsCmd
frames) scheduling stopped because MAP was full
|
| danDevInfoFrameUtilMapSlotsUsed |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.8
Percentage of MAP slots used in the
danDevInfoMeasureSlotsCmd frames.
|
| danDevInfoFrameUtilPercDLSlotsUsed |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.4
Percenetage of DL slots used in the
danDevInfoMeasureSlotsCmd frames not including
MAP and FCH
|
| danDevInfoFrameUtilPercULSlotsUsed |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.7
Percentage of UL slots used in the
danDevInfoMeasureSlotsCmd frames not including
UL control slots
|
| danDevInfoFrameUtilRepetitionRate |
Object ID: 1.3.1.4.1.32584.1.3.4.8
Frame utilization data collection repetition interval
in seconds (range 5 - 60). This field identifies the
time between 2 consecutive executions of the frame
utilization data collection.
|
| danDevInfoFrameUtilSysTime |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.1
The time in GMT at which the data was collected.
|
| danDevInfoFrameUtilTable |
Object ID: 1.3.1.4.1.32584.1.3.4.6
Frame Utilization Table
|
| danDevInfoFrameUtilTotalDLSlots |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.2
Total number of DL slots in the
danDevInfoMeasureSlotsCmd frames not including
MAP and FCH
|
| danDevInfoFrameUtilTotalULSlots |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.5
Total number of UL slots in the
danDevInfoMeasureSlotsCmd frames not including
UL control slots
|
| danDevInfoFrameUtilULSlotsUsed |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.6
Number of UL slots used in the
danDevInfoMeasureSlotsCmd frames not including
UL control slots
|
| danDevInfoFrameUtilUl16QAM12 |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.24
Percentage of UL slots modulated with 16QAM 1/2.
|
| danDevInfoFrameUtilUl16QAM34 |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.23
Percentage of UL slots modulated with 16QAM 3/4.
|
| danDevInfoFrameUtilUl64QAM12 |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.22
Percentage of UL slots modulated with 64QAM 1/2.
|
| danDevInfoFrameUtilUl64QAM23 |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.21
Percentage of UL slots modulated with 64QAM 2/3.
|
| danDevInfoFrameUtilUl64QAM34 |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.20
Percentage of UL slots modulated with 64QAM 3/4.
|
| danDevInfoFrameUtilUl64QAM56 |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.19
Percentage of UL slots modulated with 64QAM 5/6.
|
| danDevInfoFrameUtilUlAvgMCS |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.30
Average UL MCS (modulation and coding scheme)
(in bits/slot units) utilized during the
danDevInfoFrameUtilInterval frames duration.
|
| danDevInfoFrameUtilUlQPSK12 |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.26
Percentage of UL slots modulated with QPSK 1/2.
|
| danDevInfoFrameUtilUlQPSK34 |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.25
Percentage of UL slots modulated with QPSK 3/4.
|
| danDevInfoFrameUtilUlThroughput |
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.28
Over the air UL throughput in bps during the
danDevInfoFrameUtilInterval frames duration.
|
| danDevInfoMeasureMapFull |
Object ID: 1.3.1.4.1.32584.1.3.4.3
Returns map usage
|
| danDevInfoMeasureMapUsage |
Object ID: 1.3.1.4.1.32584.1.3.4.2
Returns number of times that map was full
|
| danDevInfoMeasureSlotsCmd |
Object ID: 1.3.1.4.1.32584.1.3.4.1
Starts the slots measurments. Parameter is number of frames to measure.
|
| danDevInfoMeasureSlotsDataAggrSlots |
Object ID: 1.3.1.4.1.32584.1.3.4.4.1.4
Returns aggregated slots number used for the zone
|
| danDevInfoMeasureSlotsDataDir |
Object ID: 1.3.1.4.1.32584.1.3.4.4.1.2
Returns zone direction : 0 - downlink , 1 - uplink
|
| danDevInfoMeasureSlotsDataEntry |
Object ID: 1.3.1.4.1.32584.1.3.4.4.1
Description.
|
| danDevInfoMeasureSlotsDataIdx |
Object ID: 1.3.1.4.1.32584.1.3.4.4.1.1
Table index
|
| danDevInfoMeasureSlotsDataPercentage |
Object ID: 1.3.1.4.1.32584.1.3.4.4.1.5
Returns average zone usage
|
| danDevInfoMeasureSlotsDataTable |
Object ID: 1.3.1.4.1.32584.1.3.4.4
Description.
|
| danDevInfoMeasureSlotsDataZoneSize |
Object ID: 1.3.1.4.1.32584.1.3.4.4.1.3
Returns zone size in slots
|
| danDevInfoMeasureSlotsNumCnt |
Object ID: 1.3.1.4.1.32584.1.3.4.5.1.3
Slots number actually used for provided rate and direction
|
| danDevInfoMeasureSlotsNumDir |
Object ID: 1.3.1.4.1.32584.1.3.4.5.1.2
Returns zone direction : 0 - downlink , 1 - uplink
|
| danDevInfoMeasureSlotsNumEntry |
Object ID: 1.3.1.4.1.32584.1.3.4.5.1
Description.
|
| danDevInfoMeasureSlotsNumRate |
Object ID: 1.3.1.4.1.32584.1.3.4.5.1.1
Table index - rate
FM_e_qpsk_1_2 =3,
FM_e_qpsk_3_4 = 4,
FM_e_quam16_1_2=5,
FM_e_quam16_3_4=6,
FM_e_quam64_1_2=7,
FM_e_quam64_2_3=8,
FM_e_quam64_3_4=9,
FM_e_quam64_5_6=10,
|
| danDevInfoMeasureSlotsNumTable |
Object ID: 1.3.1.4.1.32584.1.3.4.5
Description.
|
| danDlAccNumSymbols |
Object ID: 1.3.1.4.1.32584.1.2.2.1.5
Size of Access DL sub frame in symbols
|
| danEcinrBackoffValue |
Object ID: 1.3.1.4.1.32584.1.2.4.2.2
The backoff value in unit of msc used by the DL rate Adpatation based on Effective CINR
|
| danEnforceAuth |
Object ID: 1.3.1.4.1.32584.1.6.6
When set to TRUE force Authentication in Stand-Alone according to Authorized CPE list
|
| danEthRxBroadcastPackets |
Object ID: 1.3.1.4.1.32584.1.8.13.7
Total number of broadcast packets received.
|
| danEthRxClsDestIp |
Object ID: 1.3.1.4.1.32584.1.8.13.19
Total number of received packets, classified by destination IP.
|
| danEthRxClsDestMac |
Object ID: 1.3.1.4.1.32584.1.8.13.24
Total number of received packets, classified by destination MAC.
|
| danEthRxClsGreKey |
Object ID: 1.3.1.4.1.32584.1.8.13.30
Total number of received packets, classified by GRE Key.
|
| danEthRxClsSrcIp |
Object ID: 1.3.1.4.1.32584.1.8.13.20
Total number of received packets, classified by source IP.
|
| danEthRxClsSrcMac |
Object ID: 1.3.1.4.1.32584.1.8.13.25
Total number of received packets, classified by source MAC.
|
| danEthRxClsTcpDestPort |
Object ID: 1.3.1.4.1.32584.1.8.13.28
Total number of received packets, classified by destination TCP port.
|
| danEthRxClsTcpSrcPort |
Object ID: 1.3.1.4.1.32584.1.8.13.29
Total number of received packets, classified by source TCP port.
|
| danEthRxClsTos |
Object ID: 1.3.1.4.1.32584.1.8.13.21
Total number of received packets, classified by TOS.
|
| danEthRxClsUdpDestPort |
Object ID: 1.3.1.4.1.32584.1.8.13.26
Total number of received packets, classified by destination UDP port.
|
| danEthRxClsUdpSrcPort |
Object ID: 1.3.1.4.1.32584.1.8.13.27
Total number of received packets, classified by source UDP port.
|
| danEthRxClsUnclassified |
Object ID: 1.3.1.4.1.32584.1.8.13.18
Total number of received packets, unclassified
|
| danEthRxClsVlanId |
Object ID: 1.3.1.4.1.32584.1.8.13.22
Total number of received packets, classified by VLAN Id.
|
| danEthRxClsVlanPriority |
Object ID: 1.3.1.4.1.32584.1.8.13.23
Total number of received packets, classified by VLAN Priority.
|
| danEthRxDroppedPackets |
Object ID: 1.3.1.4.1.32584.1.8.13.9
Total number of received packets dropped.
|
| danEthRxIpPacketsNonVlan |
Object ID: 1.3.1.4.1.32584.1.8.13.11
Total number of received IP packets, without VLAN tag.
|
| danEthRxIpPacketsNonVlanDropped |
Object ID: 1.3.1.4.1.32584.1.8.13.15
Total number of received IP packets, without VLAN tag, dropped.
|
| danEthRxIpPacketsVlan |
Object ID: 1.3.1.4.1.32584.1.8.13.10
Total number of received IP packets, with VLAN tag.
|
| danEthRxIpPacketsVlanDropped |
Object ID: 1.3.1.4.1.32584.1.8.13.14
Total number of received IP packets, with VLAN tag, dropped.
|
| danEthRxNonIpPacketsNonVlan |
Object ID: 1.3.1.4.1.32584.1.8.13.13
Total number of received Non-IP packets, without VLAN tag.
|
| danEthRxNonIpPacketsNonVlanDropped |
Object ID: 1.3.1.4.1.32584.1.8.13.17
Total number of received Non-IP packets, without VLAN tag, dropped
|
| danEthRxNonIpPacketsVlan |
Object ID: 1.3.1.4.1.32584.1.8.13.12
Total number of received Non-IP packets, with VLAN tag.
|
| danEthRxNonIpPacketsVlanDropped |
Object ID: 1.3.1.4.1.32584.1.8.13.16
Total number of received Non-IP packets, with VLAN tag, dropped
|
| danEthRxPacketErrors |
Object ID: 1.3.1.4.1.32584.1.8.13.8
Total number of packets received with errors.
|
| danEthRxTotalBytes |
Object ID: 1.3.1.4.1.32584.1.8.13.5
Total number of bytes received.
|
| danEthRxTotalPackets |
Object ID: 1.3.1.4.1.32584.1.8.13.6
Total number of packets received.
|
| danEthTxDroppedPackets |
Object ID: 1.3.1.4.1.32584.1.8.13.4
Total number of packets dropped.
|
| danEthTxPacketErrors |
Object ID: 1.3.1.4.1.32584.1.8.13.3
Total number of error packets.
|
| danEthTxTotalBytes |
Object ID: 1.3.1.4.1.32584.1.8.13.1
Total bytes transmitted.
|
| danEthTxTotalPackets |
Object ID: 1.3.1.4.1.32584.1.8.13.2
Total packets transmitted.
|
| danEthernetDSTMACaddress |
Object ID: 1.3.1.4.1.32584.1.1.2.3
Default Ethernet destination MAC address when no ARP resolution.
|
| danEventLogGenericEntryLimit |
Object ID: 1.3.1.4.1.32584.1.4.1.1.2.1
The maximum number of event entries that may be held in wmanDevCmnEventLogTable.
If an application changes the limit while there are events in the log, the oldest events must be discarded
to bring the log down to the new limit.
|
| danExtendedRangeEnabled |
Object ID: 1.3.1.4.1.32584.1.1.7.8
Allows the user to select extended ranging mode
- False: Disabled(0) extended range mode disabled
- True: Enabled(1) extended range mode enabled
Default is false.
|
| danFmBandwidth |
Object ID: 1.3.1.4.1.32584.1.2.2.1.1
The OID maintains the actual BW the AP is currently configured to.
Supported bandwidth: 3.5MHz, 5MHz, 7MHz, 10MHz
|
| danFmDlNumSymbols |
Object ID: 1.3.1.4.1.32584.1.2.2.1.3
DL sub frame size number of symols
|
| danFmMapType |
Object ID: 1.3.1.4.1.32584.1.2.2.1.2
Set MAP Type to Regular MAP or Compressed MAP
|
| danFmNumZones |
Object ID: 1.3.1.4.1.32584.1.2.2.3.1
total number of zones in the frame
|
| danFmUlNumSymbols |
Object ID: 1.3.1.4.1.32584.1.2.2.1.4
UL sub frame size number of symols
|
| danFmZoneAgcProfile |
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.15
AGC profile setting
|
| danFmZoneAntMethod |
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.7
Zone SISO STC Matrix A, Matrix B
|
| danFmZoneFirstUlTxZone |
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.13
First Ul Tx Zone
|
| danFmZoneIncPreamble |
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.12
Used for test
|
| danFmZoneIndex |
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.1
Indicate a specific zone
|
| danFmZonePermBase |
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.10
the permbase for this zone. 0..31 DL / 0..127 UL.
|
| danFmZonePermSchem |
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.6
perm scheme
|
| danFmZonePrbsId |
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.8
Zone PRBS ID
|
| danFmZoneSymbols |
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.3
Zone length in symbols
|
| danFmZoneTAD |
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.5
time_advance_distance
|
| danFmZoneTG |
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.4
Transmit Recieve Transition Gap in microseconds
|
| danFmZoneType |
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.2
Zone type: zone_dl_acc, zone_ul_acc, zone_dl_bh, zone_ul_bh
|
| danFmZoneUseDedicatePilots |
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.14
support for dedicated pilots in DL. Should be related to segment planning.
|
| danFmZoneUsePrbsId |
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.9
Zone Use PRBS ID in the permutation
|
| danFmZoneWkReset |
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.11
used for test
|
| danFmZonesEntry |
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1
Each entry refer to a specific zone
|
| danFmZonesTable |
Object ID: 1.3.1.4.1.32584.1.2.2.3.2
Table maintain parameters of zones, number of supported zones provided by 'danFmNumZones'
size of table is fixed.
|
| danFrequencyRangeType |
Object ID: 1.3.1.4.1.32584.1.2.6.1
This oid provide information about the frequency range supported by the device HW.
Following ranges information are provided:
- range3_5: Board Central Frequency range is 3.5 GHz
- range3_65: Board Central Frequency range is 3.65 GHz
- rangeOther: Other board types
|
| danFrequencyRestrictionModeReadOnly |
Object ID: 1.3.1.4.1.32584.1.2.6.2
The OID specify the restriction mode.
restNoRestriction: No restriction for frequency settings
restRestrictionCode1: Frequency setting is restricted to the range 3.4-3.6GHz
|
| danFwdDlNoneAssociated |
Object ID: 1.3.1.4.1.32584.1.9.2
Boolean.
Defines the required handling for DL unicast non-associated packets:
- False: do not forward packets if their destination Mac address
is not associated with any SM.
- True: forward packets to the group/common MCC if their destination Mac
address is not associated with any SM.
Default is false.
Note: UL unicast non-associated packets are always forwarded only to the Ethernet
|
| danFwdUlBroadcastAir |
Object ID: 1.3.1.4.1.32584.1.9.3
Boolean. UL broadcast either flood or pass to Ethernet only.
- False: Do not forward UL broadcast packets to the air interface. Note: UL broadcast packets are still forwarded to the Ethernet.
- True: forward packets to the air interface and Ethernet (flood).
Default is True
Notes:
1. UL broadcast packets are always forwarded to the Ethernet interface
2. DL broadcast packets are always forwarded to the air interface
|
| danGPSHeight |
Object ID: 1.3.1.4.1.32584.1.1.1.12.7
Display Height as received from the GPS in a 00.0 meters format.
|
| danGPSLatitude |
Object ID: 1.3.1.4.1.32584.1.1.1.12.5
Display Latitude as received from the GPS in a
ddmm.mmmm N/S format. If no Latitude is
received, then display 0000.0000 N
|
| danGPSLongitude |
Object ID: 1.3.1.4.1.32584.1.1.1.12.6
Display Longitude as received from the GPS in a
ddmm.mmmm E/W format. If no Longitude is
received, then display 0000.0000 E
|
| danGPSSpeed |
Object ID: 1.3.1.4.1.32584.1.1.1.12.8
Display Speed as received from the GPS in a 00.0 km/hr format.
|
| danGPSTime |
Object ID: 1.3.1.4.1.32584.1.1.1.12.4
Diplay UTC time in HH:MM:SS format if received
from the GPS, else display No Time
|
| danGenericAlarmDescription |
Object ID: 1.3.1.4.1.32584.1.4.1.2.1.1.6
Description of the Alarm (for display purpose)
|
| danGenericAlarmId |
Object ID: 1.3.1.4.1.32584.1.4.1.2.1.1.2
Alarm unique Id
|
| danGenericAlarmName |
Object ID: 1.3.1.4.1.32584.1.4.1.2.1.1.5
Alarm specific name
|
| danGenericAlarmSevirity |
Object ID: 1.3.1.4.1.32584.1.4.1.2.1.1.7
The assigned sevirity of the Alarm (Mainly for display purpose)
|
| danGenericAlarmUpdateTime |
Object ID: 1.3.1.4.1.32584.1.4.1.2.1.1.3
Alarm last change time
|
| danGenericEventAlarmAction |
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.1.1.10
According to AlarmId (i.e. if event is assosiated with alarm) then the values for this event are: AlarmOn, AlarmOff, N/A.
|
| danGenericEventAlarmId |
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.1.1.9
The related alarmId attached to this event or N/A
|
| danGenericEventControlEntry |
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.1.1
Table defines all possible events, with controlable attribute per event. Table size is fixed and reflect
the event supported by the SW.
|
| danGenericEventControlTable |
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.1
Table defines all possible events, with controlable attribute per event. Table size is fixed and reflect
the event supported by the SW.
|
| danGenericEventDescription |
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.1.1.3
Event Readable description
|
| danGenericEventDirection |
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.1.1.6
Measurement vs threshold:
- if up event is generated in Value >= Threshold
- if down event is generated in val <= threshold
- if diff generate if different from previous value
|
| danGenericEventId |
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.1.1.1
Unique Event ID
|
| danGenericEventName |
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.1.1.2
Event Readable name
|
| danGenericEventPollPeriod |
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.1.1.5
Polling period for the specific event type.
If 0 then the polling is disabled and event should be updated externally.
|
| danGenericEventSevirity |
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.1.1.4
Event assigned sevirity
|
| danGenericEventThreshold |
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.1.1.7
Event threshold (must be number)
|
| danGenericEventTrapEnabled |
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.1.1.8
If true generate Trap when event is logged into the LogGenericEventTable
|
| danHandRngCode |
Object ID: 1.3.1.4.1.32584.1.2.7.3
Number of Handover ranging codes. Possible values are from 0 to
255.
|
| danHarqStatsAcks |
Object ID: 1.3.1.4.1.32584.1.8.11.1.8
Number of ACK's.
|
| danHarqStatsCid |
Object ID: 1.3.1.4.1.32584.1.8.11.1.3
MSS Connection Id.
|
| danHarqStatsDirection |
Object ID: 1.3.1.4.1.32584.1.8.11.1.5
Direction of Service Flow.
|
| danHarqStatsDiscards |
Object ID: 1.3.1.4.1.32584.1.8.11.1.10
Description.
|
| danHarqStatsEntry |
Object ID: 1.3.1.4.1.32584.1.8.11.1
Each entry represent MSS and its Service Flow.
|
| danHarqStatsMacAddr |
Object ID: 1.3.1.4.1.32584.1.8.11.1.1
MSS MAC address.
|
| danHarqStatsMssId |
Object ID: 1.3.1.4.1.32584.1.8.11.1.4
MSS ID.
|
| danHarqStatsNacks |
Object ID: 1.3.1.4.1.32584.1.8.11.1.9
Number of NACK's.
|
| danHarqStatsNoLlrs |
Object ID: 1.3.1.4.1.32584.1.8.11.1.11
Number of no LLR's.
|
| danHarqStatsNumAcids |
Object ID: 1.3.1.4.1.32584.1.8.11.1.6
Number of ACIDS.
|
| danHarqStatsNumRetries |
Object ID: 1.3.1.4.1.32584.1.8.11.1.7
Number of Retries.
|
| danHarqStatsSfId |
Object ID: 1.3.1.4.1.32584.1.8.11.1.2
Serice Flow Id.
|
| danHarqStatsTable |
Object ID: 1.3.1.4.1.32584.1.8.11
HARQ Statistics table.
|
| danHostName |
Object ID: 1.3.1.4.1.32584.1.1.2.14
Determines hostname
|
| danIf2fBsQoSFixedVsVariableSduInd |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.9
The value of this parameter specifies whether the SDUs on
the service flow are variable-length (0) or fixed-length
(1). The parameter is used only if packing is on for the
service flow. The default value is 0, i.e.,variable-length
SDUs.
If the parameter is omitted, 0 is assumed.
|
| danIf2fBsQoSMaxLatency |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.8
The value of this parameter specifies the maximum latency
between the reception of a packet by the BS or SS on its
network interface and the forwarding of the packet to its
RF Interface.
|
| danIf2fBsQoSMaxSustainedRate |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.4
This parameter defines the peak information rate of the
service. The rate is expressed in bits per second and
pertains to the SDUs at the input to the system.
|
| danIf2fBsQoSMaxTrafficBurst |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.5
This parameter defines the maximum burst size that must be
accommodated for the service.
If the parameter is omitted, 0 is assumed.
|
| danIf2fBsQoSMinReservedRate |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.6
This parameter specifies the minimum rate reserved for this
service flow.
|
| danIf2fBsQoSProfileIndex |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.1
The index value which uniquely identifies an entry in the danIf2fBsQosProfileTable.
|
| danIf2fBsQoSSduSize |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.10
The value of this parameter specifies the length of the
SDU for a fixed-length SDU service flow. This parameter
is used only if packing is on and the service flow is
indicated as carrying fixed-length SDUs. The default
value is 49 bytes, i.e., VC-switched ATM cells with PHS.
The parameter is relevant for both ATM and Packet
Convergence Sublayers.
If the parameter is omitted, 49 is assumed.
|
| danIf2fBsQoSToleratedJitter |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.7
This parameter defines the Maximum delay variation (jitter)
for the connection.
|
| danIf2fBsQoSTrafficPriority |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.3
The value of this parameter specifies the priority
assigned to a service flow. For uplink service flows,
the BS should use this parameter when determining
precedence in request service and grant generation,
and the SS shall preferentially select contention
Request opportunities for Priority Request CIDs
based on this priority. Higher numbers indicate higher
priority.
If the parameter is omitted, 5 is assumed.
|
| danIf2fBsQosArqAckProcess |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.26
This optional parameter indicates the number of ms required by the ARQ receiver to process the received ARQ blocks and provide a valid ACK or NAK
Values are in frames
If the parameter is omitted, 0 is assumed.
|
| danIf2fBsQosArqBlockSize |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.25
The size of an ARQ block in bytes
If the parameter is omitted, 128 is assumed.
|
| danIf2fBsQosArqRxRetryTimeout |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.14
Indicates receiver delay, including receiving (e.g., MAC
PDUs) and sending (e.g., ARQ feedback) delays and other
implementation-dependent processing delays. If the
receiver is the BS, it may include other delays such as
scheduling and propagation delay.
If the parameter is omitted, in #fr 5 is assumed.
|
| danIf2fBsQosArqTxRetryTimeout |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.13
Indicates transmitter delay, including sending (e.g., MAC
PDUs) and receiving (e.g., ARQ feedback) delays and other
implementation dependent processing delays. If the
transmitter is the BS, it may include other delays such as
scheduling and propagation delay.
If the parameter is omitted, in #fr 5 is assumed.
|
| danIf2fBsQosDataDeliveryType |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.21
Type of downlink Data Delivery Services. Values as in TLV 145/146.29
If the parameter is omitted, BE is assumed.
|
| danIf2fBsQosHarqEnable |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.27
Enable HARQ for this SF
If the parameter is omitted, 0 is assumed.
|
| danIf2fBsQosHarqMapLen |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.28
Num of ACIDs
Values are 0..16
If the parameter is omitted, 4 is assumed.
|
| danIf2fBsQosHarqMaxAcids |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.31
Max num of ACIDs per frame
Values are 1..16 .
If the parameter is omitted, 1 is assumed.
|
| danIf2fBsQosHarqMaxDlTxCmd |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.32
HARQ downlink max allocation per ACID
Values are 0=dont care. 1..100000
If the parameter is omitted, 4096 is assumed.
|
| danIf2fBsQosHarqMaxUlTxCmd |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.33
HARQ uplink max allocation per ACID
Values are 0=dont care. 1..100000
If the parameter is omitted, 2048 is assumed.
|
| danIf2fBsQosHarqNumRetries |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.29
Max num of retransmissions
Values are 0..16 for DL
0..7 for UL
If the parameter is omitted, 1 is assumed.
|
| danIf2fBsQosHarqPduSn |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.30
PSU sequence number recording scheme.
0 = none, 1=short, 2=long
If the parameter is omitted, 0 is assumed.
|
| danIf2fBsQosProfileDscpMarking |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.36
DSCP value being set to all packets affected by this profile
|
| danIf2fBsQosProfileDscpMarkingEnable |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.35
Enable DSCP marking feature (when disable the DSCP bit remain unchanged)
|
| danIf2fBsQosProfileEntry |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1
This table provides one row for each service class
|
| danIf2fBsQosProfileTable |
Object ID: 1.3.1.4.1.32584.1.7.4.1
Each entry of the table contains corresponding service flow
characteristic attributes (e.g. QoS parameter set). The
value of wmanIf2fBsQoSProfileIndex is obtained from
wmanIf2fBsServiceClassIndex in wmanIf2fBsProvisionedSfTable
|
| danIf2fBsQosReqTxPolicy |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.19
The value of this parameter provides the capability to
specify certain attributes for the associated service
flow. An attribute is enabled by setting the corresponding
bit position to 1.
VALUES AS IN TLV 145/146.12
if the parameter is omitted, 0x10 is assumed.
|
| danIf2fBsQosScArqBlockLifetime |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.15
The maximum time interval an ARQ fragment will be managed
by the transmitter ARQ machine, once initial transmission
of the fragment has occured. If transmission or
retransmission of the fragment is not acknowledged by the
receiver before the time limit is reached, the fragment is
discarded. A value of 0 means Infinite.
If the parameter is omitted, #40 is assumed.
|
| danIf2fBsQosScArqDeliverInOrder |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.17
Indicates whether or not data is to be delivered by the
receiving MAC to its client application in the order in
which data was handed off to the originating MAC.
|
| danIf2fBsQosScArqEnable |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.11
True(1) ARQ enabling is requested for the connection.
If the parameter is omitted, 0 is assumed.
|
| danIf2fBsQosScArqRxPurgeTimeout |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.18
Indicates the time interval the ARQ window is advanced
after a fragment is received. A value of 0 means Infinite.
If the parameter is omitted, in #frame : 32 is assumed
|
| danIf2fBsQosScArqSyncLossTimeout |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.16
The maximum interval before declaring a loss of
synchronization of the sender and receiver state machines.
A value of 0 means Infinite.
If the parameter is omitted, in #f : 120 is assumed.
|
| danIf2fBsQosScArqWindowSize |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.12
Indicates the maximum number of unacknowledged
fragments at any time.
If the parameter is omitted, 1024 is assumed.
|
| danIf2fBsQosSduInteraval |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.22
Nominal interval between consequent SDU arrivals.. Values as in TLV 145/146.30
If the parameter is omitted, 0 is assumed.
|
| danIf2fBsQosSecurityEnable |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.34
Enable encryption for this SF.
If the parameter is omitted, 0 is assumed.
|
| danIf2fBsQosServiceClassName |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.2
Refers to the Service Class Name
|
| danIf2fBsQosServiceClassRowStatus |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.37
This object is used to create a new row or modify or delete
an existing row in this table.
If the implementator of this MIB has choosen not to
implement 'dynamic assignment' of profiles, this object is
not useful and should return noSuchName upon SNMP request.
|
| danIf2fBsQosULscheduleType |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.20
uplink service type. Values as in TLV 145.11
If the parameter is omitted, BE is assumed.
|
| danIf2fBsQosUnsolicitedGrantInterval |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.23
The nominal interval between successive data grant opportunities for this SF
Values are in MS.
If the parameter is omitted, 0 is assumed.
|
| danIf2fBsQosUnsolicitedPollInterval |
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.24
The maximal nominal interval between successive polling grants
opportunities for this Service Flow.
Values are in MS.
If the parameter is omitted, 0 is assumed.
|
| danIf2fBsRedQoSMaxLatency |
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.6
The value of this parameter specifies the maximum latency
between the reception of a packet by the BS or SS on its
network interface and the forwarding of the packet to its
RF Interface.
|
| danIf2fBsRedQoSMaxSustainedRate |
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.3
This parameter defines the peak information rate of the
service. The rate is expressed in bits per second and
pertains to the SDUs at the input to the system.
|
| danIf2fBsRedQoSMaxTrafficBurst |
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.4
This parameter defines the maximum burst size that must be
accommodated for the service.
If the parameter is omitted, 0 is assumed.
|
| danIf2fBsRedQoSMinReservedRate |
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.5
This parameter specifies the minimum rate reserved for this
service flow.
|
| danIf2fBsRedQoSProfileIndex |
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.1
The index value which uniquely identifies an entry in the danIf2fBsRedQosProfileTable.
|
| danIf2fBsRedQosDataDeliveryType |
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.7
Type of downlink Data Delivery Services. Values as in TLV 145/146.29
If the parameter is omitted, BE is assumed.
|
| danIf2fBsRedQosHarqEnable |
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.10
Enable HARQ for this SF
If the parameter is omitted, 0 is assumed.
|
| danIf2fBsRedQosHarqNumRetries |
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.11
Max num of retransmissions
Values are 0..16 for DL
0..7 for UL
If the parameter is omitted, 1 is assumed.
|
| danIf2fBsRedQosProfileDscpMarking |
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.14
DSCP value being set to all packets affected by this profile
|
| danIf2fBsRedQosProfileDscpMarkingEnable |
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.13
Enable DSCP marking feature (when disable the DSCP bit remain unchanged)
|
| danIf2fBsRedQosSecurityEnable |
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.12
Enable encryption for this SF.
If the parameter is omitted, 0 is assumed.
|
| danIf2fBsRedQosServiceClassName |
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.2
Refers to the Service Class Name
|
| danIf2fBsRedQosServiceClassRowStatus |
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.15
This object is used to create a new row or modify or delete
an existing row in this table.
If the implementator of this MIB has choosen not to
implement 'dynamic assignment' of profiles, this object is
not useful and should return noSuchName upon SNMP request.
|
| danIf2fBsRedQosUnsolicitedGrantInterval |
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.8
The nominal interval between successive data grant opportunities for this SF
Values are in MS.
If the parameter is omitted, 0 is assumed.
|
| danIf2fBsRedQosUnsolicitedPollInterval |
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.9
The maximal nominal interval between successive polling grants
opportunities for this Service Flow.
Values are in MS.
If the parameter is omitted, 0 is assumed.
|
| danIf2fBsReducedQosProfileEntry |
Object ID: 1.3.1.4.1.32584.1.7.4.7.1
Description.
|
| danIf2fBsReducedQosProfileTable |
Object ID: 1.3.1.4.1.32584.1.7.4.7
Table is mainly provide with a way to configure QoS profile using a subset of attributes
|
| danIfActualIpAddressMask |
Object ID: 1.3.1.4.1.32584.1.1.2.1.1.2
Actual IP address in the following format: a.y.z.w/subnet for example:
192.168.3.4/24
|
| danIfDuplexMode |
Object ID: 1.3.1.4.1.32584.1.1.2.1.1.1
Indicate the Duplex mode of the specifoc interface.
- N/A
- Half Duplex
- Full Duplex
|
| danIfExtensionEntry |
Object ID: 1.3.1.4.1.32584.1.1.2.1.1
Description.
|
| danIfExtensionTable |
Object ID: 1.3.1.4.1.32584.1.1.2.1
The table contains Design Art Extention to the Standard MIB-2 interface table
|
| danIntRngCode |
Object ID: 1.3.1.4.1.32584.1.2.7.1
Number of Initial ranging codes. Possible values are from 0 to
255.
|
| danIpConfigEntry |
Object ID: 1.3.1.4.1.32584.1.1.2.12.1
Table entry is related to a given interface.
The table contains the various interfaces and their attributes, note that not all interfaces are
configurable, user may configure only the relevant interfaces of the version (Wired, Wireless).
Note that the IP address seen is the static configuration (i.e. the assign IP if DHCP is not enable
for the interface)
|
| danIpConfigInterDhcpStatus |
Object ID: 1.3.1.4.1.32584.1.1.2.12.1.4
Disable DHCP client (true indicate DHCPdisable)
|
| danIpConfigInterIpAddress |
Object ID: 1.3.1.4.1.32584.1.1.2.12.1.2
IP address in the following format: a.y.z.w/subnet for example:
192.168.3.4/24
When the subnet is ommited a default 32 subnet is taken (e.g. 192.168.3.4 --> 192.168.3.4/32)
|
| danIpConfigInterRoutStatus |
Object ID: 1.3.1.4.1.32584.1.1.2.12.1.5
Disable routing (true indicate routing disable)
|
| danIpConfigInterStatus |
Object ID: 1.3.1.4.1.32584.1.1.2.12.1.3
Disable IP interface (true indicate interface disabled)
|
| danIpConfigInterifIndex |
Object ID: 1.3.1.4.1.32584.1.1.2.12.1.1
Interface corresponding Ifindex
|
| danIpConfigTable |
Object ID: 1.3.1.4.1.32584.1.1.2.12
Table contains the various interfaces and their attributes, note that not all interfaces are
configurable, user may configure only the relevant interfaces of the version (Wired, Wireless).
Note that the IP address seen is the static configuration (i.e. the assign IP if DHCP is not enable
for the interface)
|
| danKeyLifetime |
Object ID: 1.3.1.4.1.32584.1.6.4
Key Life time in seconds
|
| danLattitude |
Object ID: 1.3.1.4.1.32584.1.1.1.5
System installation Lattitue, Range -90 to 90
Implemented as free format Text
|
| danLocationStatsState |
Object ID: 1.3.1.4.1.32584.1.1.1.12.9
|
| danLogGenericEventDevId |
Object ID: 1.3.1.4.1.32584.1.4.1.1.2.2.1.2
The MAC address of the Event source (e.g. SS MAC address)
|
| danLogGenericEventEntry |
Object ID: 1.3.1.4.1.32584.1.4.1.1.2.2.1
Entries appear in this table when events occur, and are
removed to make ways for new entries when buffer is full,
the entry passes the lifetime limit. This table is
indexed by wmanDevCmnDeviceIndex and
wmanDevCmnEventLogIndex.
|
| danLogGenericEventExtValInt |
Object ID: 1.3.1.4.1.32584.1.4.1.1.2.2.1.4
Relevant value of type Integer for this event (e.g. 1 for SS conected)
|
| danLogGenericEventId |
Object ID: 1.3.1.4.1.32584.1.4.1.1.2.2.1.3
Event ID as defined in the danGenericEventControlTable
|
| danLogGenericEventTable |
Object ID: 1.3.1.4.1.32584.1.4.1.1.2.2
This is the Syslog table that is used to store local
events. This table should reside in the non-volatile
memory that should presist after power cycle or reboot.
The number of entries in this table is determined by
wmanDevCmnEventLogEntryLimit. It is a wrap around buffer.
When the buffer is full, the oldest entry will be removed
to make room for the newest entry.
|
| danLogGenericEventTime |
Object ID: 1.3.1.4.1.32584.1.4.1.1.2.2.1.1
The value of sysUpTime when the entry was placed in the
log. If the entry occurred before the most recent
management system initialization this object value must
be set to zero.
|
| danLongtitude |
Object ID: 1.3.1.4.1.32584.1.1.1.6
System installation Longtitude, Range -180 to 180
Implemented as free format Text
|
| danMaxSF4BS |
Object ID: 1.3.1.4.1.32584.1.1.1.3
Max number of service flow records per AP
|
| danMaxSF4SM |
Object ID: 1.3.1.4.1.32584.1.1.1.4
Max number of service flow records per SM
|
| danMaxSupportedCPE |
Object ID: 1.3.1.4.1.32584.1.1.1.2
Max number of CPEs that can be registered with AP
|
| danMccFwdMulticast |
Object ID: 1.3.1.4.1.32584.1.9.6
Boolean. Ethernet DL multicast traffic - either discard or flood.
- False: discard multicast traffic
- True: downlink multicast traffic is forwarded over MCC (flood).
Default is False.
|
| danMccMcs |
Object ID: 1.3.1.4.1.32584.1.7.1.8
Enum. Specifies the MCS of the MCCs. Range is [3 - 10] Default value is 3 (QPSK1/2)
|
| danMccSecurityEnable |
Object ID: 1.3.1.4.1.32584.1.7.1.7
Bool. Enables/Disables security on MCC.
True: enabled
False: disabled
Default is false.
|
| danMibLastElement |
Object ID: 1.3.1.4.1.32584.1.90
Must be last OID needed for SNMPV1 support
|
| danMngAirIf |
Object ID: 1.3.1.4.1.32584.1.9.7
Boolean. Determine whether AP is manageable from air
interface.
- False: AP is manageable from Ethernet interface only.
- True: AP is manageable from both Ethernet and air interfaces
Default is False.
|
| danMngQmFactor |
Object ID: 1.3.1.4.1.32584.1.9.8
Integer. Number of bytes to drop from RX full queue before next insertion is possible
|
| danNtpServerAddress |
Object ID: 1.3.1.4.1.32584.1.1.6.7.1.2
Active NTP servers Address (IP or name)
|
| danNtpServerEnable |
Object ID: 1.3.1.4.1.32584.1.1.6.7.1.3
Status of the server
|
| danNtpServerEntry |
Object ID: 1.3.1.4.1.32584.1.1.6.7.1
The NTP server table contains addresses of NTP servers. The table size is fixed to the
maximum supported server.
|
| danNtpServerIndex |
Object ID: 1.3.1.4.1.32584.1.1.6.7.1.1
NPT server index
|
| danNtpServerPolling |
Object ID: 1.3.1.4.1.32584.1.1.6.5
NTP Polling period
|
| danNtpServerTable |
Object ID: 1.3.1.4.1.32584.1.1.6.7
The NTP server table contains addresses of NTP servers. The table size is fixed to the
maximum supported server.
|
| danNtpStatus |
Object ID: 1.3.1.4.1.32584.1.1.6.6
NTP enable/disable
|
| danNtpSysClock |
Object ID: 1.3.1.4.1.32584.1.1.6.4
System time synchronized by NTP in NTP format (seconds from 1/1/1900)
Note: valid only if NTP is enabled
|
| danNtpSystemDST |
Object ID: 1.3.1.4.1.32584.1.1.6.3
Day-light-saving mode (offset in minutes)
|
| danNtpSystemTZHr |
Object ID: 1.3.1.4.1.32584.1.1.6.1
Time-zone offset in Hour
|
| danNtpSystemTZMin |
Object ID: 1.3.1.4.1.32584.1.1.6.2
Time-zone offset in Minutes
|
| danPcinrBackoffValue |
Object ID: 1.3.1.4.1.32584.1.2.4.2.3
The backoff value in unit of db used by the DL rate Adpatation based on Physical CINR
|
| danPeriRngCode |
Object ID: 1.3.1.4.1.32584.1.2.7.2
Number of periodic ranging codes. Possible values are from 0 to
255.
|
| danPostMortemCommand |
Object ID: 1.3.1.4.1.32584.1.3.3.2
Activate Post Mortem commands:
- danPmSaveFile(1) - Save Post Mortem information in file defined in 'danPostMortemFileName'
- danPmSaveCompFile(2) - Save Post Mortem information in file defined in 'danPostMortemFileName' in compressed form
- danPmSendMail(3) - Send Post Mortem information by email to recipient defined in danPostMortemDestEmail
- danPmUponEnable(4) - Activate all enabled functionalties as define in danPostMortemActionEnabler
|
| danPostMortemDestEmail |
Object ID: 1.3.1.4.1.32584.1.3.3.1.7
The Post Mortem recipient email address
|
| danPostMortemMailOnStart |
Object ID: 1.3.1.4.1.32584.1.3.3.1.1
True value will initiate PM mail send at system start (after ASSERT)
|
| danPostMortemSMTPClientDomain |
Object ID: 1.3.1.4.1.32584.1.3.3.1.3
The SMTP client domain name
|
| danPostMortemSMTPClientName |
Object ID: 1.3.1.4.1.32584.1.3.3.1.4
Sender of Post Mortem email address
|
| danPostMortemSMTPClientPwd |
Object ID: 1.3.1.4.1.32584.1.3.3.1.9
Sender of Post Mortem email address
|
| danPostMortemSMTPServerAddr |
Object ID: 1.3.1.4.1.32584.1.3.3.1.5
Description.
|
| danRFAntenaDirection |
Object ID: 1.3.1.4.1.32584.1.1.4.2.1.6
Provide information about Antena direction .
Use this for predicting the coverage of directional antennas in the physical map. The values would be zero to 360 degrees, using due north as zero.
Note: range is not enforced
|
| danRFAntenaHeight |
Object ID: 1.3.1.4.1.32584.1.1.4.2.1.5
Provide information about Antena heights
|
| danRFAntennaGain |
Object ID: 1.3.1.4.1.32584.1.1.4.2.1.4
set the RF Antenna gain DBi
Note:
-------
1. The Value of wmanIf2BsCmnPhyBsEIRP is affected from danRFPout (RadioPower) and danRFAntennaGain (antennaGain), i.e. when one of those parameter is
configured the EIRP will reflect the change. Eirp is calculated according to the
following equation:
Eirp = danRFPout + danRFAntennaGain
2. The Value of wmanIf2BsCmnPhyMaxEirp is affected from danRFAntennaGain, i.e.
when one of that parameter is configured the MaxEIRP will reflect the change.
MaxEirp is calculated according to the following equation:
maxEirp = Min((danC2nBase + 15), -60) - danRFAntennaGain
danRFPout and danRFAntennaGain are of the 'firts' (the lowe index radio) mouned radio
|
| danRFEntry |
Object ID: 1.3.1.4.1.32584.1.1.4.2.1
Radio related attributes, table size is fixed limited to the maximum number of radio supported.
Each entry refers to one Radio and may be updated
|
| danRFPout |
Object ID: 1.3.1.4.1.32584.1.1.4.2.1.3
set TX Power in dBm.
Range: -25dBm < value < 26dBm
Note:
-------
1. The Value of wmanIf2BsCmnPhyBsEIRP is affected from danRFPout (RadioPower) and danRFAntennaGain (antennaGain), i.e. when one of those parameter is
configured the EIRP will reflect the change. Eirp is calculated according to the
following equation:
Eirp = danRFPout + danRFAntennaGain
2. The Value of wmanIf2BsCmnPhyMaxEirp is affected from danRFAntennaGain, i.e.
when one of that parameter is configured the MaxEIRP will reflect the change.
MaxEirp is calculated according to the following equation:
maxEirp = Min((danC2nBase + 15), -60) - danRFAntennaGain
danRFPout and danRFAntennaGain are of the 'firts' (the lower index radio) mouned radio
|
| danRFTable |
Object ID: 1.3.1.4.1.32584.1.1.4.2
Radio related attributes, table size is fixed limited to the maximum number of radio supported.
|
| danRFrequency |
Object ID: 1.3.1.4.1.32584.1.1.4.2.1.2
RF Frequency in KHz
The configured AP central frequency may be configured via the following MIB variable:
danCenterFrequency
Setting danCenterFrequencywill result in changing the frequency of all mounted Radios.
|
| danRaEnableMimoSupport |
Object ID: 1.3.1.4.1.32584.1.2.1.9
Enable MIMO to the Rate Adaptation Algorithm.
when set the RA algorithm will put the connection
in MIMO or not in MIMO according to the SNR and Multipath indications.
|
| danRadioIndex |
Object ID: 1.3.1.4.1.32584.1.1.4.2.1.1
Radio Index
|
| danRegisteredAccountEntry |
Object ID: 1.3.1.4.1.32584.1.1.5.1.1
Each entry in the table refers to one registered user account
|
| danRegisteredAccountTable |
Object ID: 1.3.1.4.1.32584.1.1.5.1
Table maintain all registered user's account in the system.
|
| danRestorePointAction |
Object ID: 1.3.1.4.1.32584.1.3.2.2.1.4
Action allowed for restore point:
- Save (save current configuration as selected restore-point)
- Restore (restore configuration according to selected restore point)
|
| danRestorePointDate |
Object ID: 1.3.1.4.1.32584.1.3.2.2.1.3
Restore point save time (GMT)
|
| danRestorePointEntry |
Object ID: 1.3.1.4.1.32584.1.3.2.2.1
Each entry represent a restore points.
|
| danRestorePointId |
Object ID: 1.3.1.4.1.32584.1.3.2.2.1.1
Resore point unique id (1..4)
|
| danRestorePointName |
Object ID: 1.3.1.4.1.32584.1.3.2.2.1.2
Restore point given name
|
| danRestorePointTable |
Object ID: 1.3.1.4.1.32584.1.3.2.2
Table shows and allow to save all restore points. Up to 4 restore points are available.
|
| danRfAgcGain |
Object ID: 1.3.1.4.1.32584.1.1.4.2.1.8
RF AGC GAIN
|
| danSNMPMode |
Object ID: 1.3.1.4.1.32584.1.1.2.15
Identifies the SNMP version in use, V1 V2 or V3
|
| danSatelliteUsed |
Object ID: 1.3.1.4.1.32584.1.1.1.12.2
Display the number of satellites used for
tracking. Default value is 0.
|
| danSatelliteVisible |
Object ID: 1.3.1.4.1.32584.1.1.1.12.3
Display the number of satellites in the view.
Default value is 0.
|
| danSelectedScriptBw |
Object ID: 1.3.1.4.1.32584.1.1.7.3
Allows the user to select the Initializing Mode script according to predefined BW.
Supported BWs are (3.5, 5, 7 or 10 MHz)
The selected BW is affected once 'danActiveModeScriptId' is configured to
'modeByBwAndRatio'
|
| danSelectedScriptMap |
Object ID: 1.3.1.4.1.32584.1.1.7.7
Allows the user to select the Initializing Mode script according to predefined Map.
The selected Ratio is affected once 'danActiveModeScriptId' is
configured to 'modeByBwAndRatio'
Supported maps are 5/7 symbols
|
| danSelectedScriptRatio |
Object ID: 1.3.1.4.1.32584.1.1.7.4
Allows the user to select the Initializing Mode script according to predefined DL/UL Ratio.
The selected Ratio is affected once 'danActiveModeScriptId' is
configured to 'modeByBwAndRatio'
Supported ratios are 55%,65% or 75%
|
| danSerialType |
Object ID: 1.3.1.4.1.32584.1.1.1.7
Atribute to control serial interface connection to operate in CLI or uGps mode.
|
| danSeurityPolicy |
Object ID: 1.3.1.4.1.32584.1.6.3
Define system's Authentication/Encryption policy:
0 No authentication, no encryption mode
1 Optional authentication and encryption
2 Forced authentication, optional encryption,
in this mode unauthenticated subscribers will be rejected by network,
once authenticated subscriber will be free to create encrypted and not encrypted service flows.
3 Forced authentication and encryption, in this mode unauthenticated subscribers will be rejected by network,
once authenticated subscriber will be not allowed to create not encrypted service flows.
|
| danSharedSecret |
Object ID: 1.3.1.4.1.32584.1.6.2
A string used to secure the communication between AAA server and Authenticator in the AP
the attribute is 'write-only'
|
| danStartofRngCodeGrp |
Object ID: 1.3.1.4.1.32584.1.2.7.5
Indicates the starting number, S, of the group of codes used for
this uplink. If not specified, the default value shall be set to
zero. All the ranging codes used on this uplink will be between S
and ((S+O+N+M+L) mod 256). Where,
N is the number of initial-ranging codes
M is the number of periodic-ranging codes
L is the number of bandwidth-request codes
O is the number of handover-ranging codes
The range of the values is from 0 to 255.
|
| danSyncClockDrift |
Object ID: 1.3.1.4.1.32584.1.1.3.4.1
The accuracy of system Clock in PPM
|
| danSyncHoldoffInterval |
Object ID: 1.3.1.4.1.32584.1.1.3.3
Attribute define the Holdoff interval, During this time the 1 pps will be held-off based on previously learned pattern of corrections.
After the hold-off period is over AP will stop transmitting and enter to idle mode until 1 pps signal is available.
Holdoff interval is given in Seconds.
|
| danSyncSource |
Object ID: 1.3.1.4.1.32584.1.1.3.1
Identify the type of synchronization in use:
- syncSourceInternalFreeRun(0),
- syncSourceGPS(1) - GPS Sync from Power Source
- syncSourcePreamble(2) - Future
- syncSourceBrdGPS(3) - GPS Sync from dedicated on Board PIN
- syncSourceUndef(9) - Undefined
|
| danSyncStatus |
Object ID: 1.3.1.4.1.32584.1.1.3.2
Provide information about the status of Synchronization,
the value is relevant for any external Sync Source selected.
If the selected sync source is internal, only the No Sync
state is returned.
- syncStateNoSync(0) - Not in Sync
- syncStateSync(1) - In sync
- syncStateSync1PPSLost(2) - External sync missing operating based
on internal clock
|
| danSysLogIpAddress |
Object ID: 1.3.1.4.1.32584.1.1.2.11
The syslog server IP address. The log messages will be sent to
|
| danSysLogLevel |
Object ID: 1.3.1.4.1.32584.1.1.2.13
Determine the current log level
|
| danSyslogStatus |
Object ID: 1.3.1.4.1.32584.1.1.2.10
Disable syslog connection (true if syslog is disabled)
|
| danTEKTimeout |
Object ID: 1.3.1.4.1.32584.1.6.5
TEK Timeout in seconds
|
| danTrackingMode |
Object ID: 1.3.1.4.1.32584.1.1.1.12.1
Display the tracking mode. Diplay noFix, when
no satellite is being tracked, twoD when less
than 4 satellites tracked, threeD when 4 or more
satellites are tracked
|
| danTrapDestEnable |
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.2.1.3
Defines is the related trap destination is active (i.e trap will be sent to this address)
|
| danTrapDestEntry |
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.2.1
Each table entry contains attribute of trap destination entity
|
| danTrapDestIndex |
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.2.1.1
The index identifies the trap destination. The number of
rows is limited to three.
|
| danTrapDestIpAddr |
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.2.1.2
IP address of SNMP manager configured as a trap (V1)
destination for versions V1 and V2 of SNMP.
|
| danTrapDestTable |
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.2
This table contains the list of NMS which are destination for system traps.
The table size is fixed and reflect the maximum trap destination supported by the system (3).
|
| danTrapUserName |
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.2.1.4
Relevant only for SNMPv3, determine the user whose keys
to use when creating the Trap message
|
| danUgpsOffset |
Object ID: 1.3.1.4.1.32584.1.1.3.5
Attribute define the offset to the GPS 1PPS to make the uGps
compatible with CMM.
offset is given in 10th of nano seconds
|
| danUlAccNumSymbols |
Object ID: 1.3.1.4.1.32584.1.2.2.1.6
Size of UL Access sub frame in symbols
|
| danUplinkBackoffValue |
Object ID: 1.3.1.4.1.32584.1.2.4.2.4
The backoff value in unit of db used by the UL rate Adpatation
|
| danUserAuthAlg |
Object ID: 1.3.1.4.1.32584.1.1.5.1.1.6
Defines an authentication protocol for user , when SNMPv3
is supported
|
| danUserLevel |
Object ID: 1.3.1.4.1.32584.1.1.5.1.1.2
Maintain the assigned level of the account (Root, installer, technician, guest)
|
| danUserName |
Object ID: 1.3.1.4.1.32584.1.1.5.1.1.1
Registered unique user name
|
| danUserPassword |
Object ID: 1.3.1.4.1.32584.1.1.5.1.1.3
User password (write only)
|
| danUserPrivAlg |
Object ID: 1.3.1.4.1.32584.1.1.5.1.1.7
Defines privacy protocol for user , when SNMPv3
is supported
|
| danUserState |
Object ID: 1.3.1.4.1.32584.1.1.5.1.1.4
Reflect and define the account state (enabled or disabled)
|
| danVlanMngEnable |
Object ID: 1.3.1.4.1.32584.1.9.4.1
Boolean. Determine VLAN management capabilities.
- False: management traffic to/from AP is untagged
- True: management traffic to/from AP is tagged
Default is False.
|
| danVlanMngId |
Object ID: 1.3.1.4.1.32584.1.9.4.2
Define the Management dedicated VLAN ID.
When danVlanMngEnable is true inbound management traffic must be tagged with VLAN ID equals danVlanMngId.
Outbound management traffic is tagged by AP with this VID.
Default is 1 (VLAN one).
|
| danVlanMngPrio |
Object ID: 1.3.1.4.1.32584.1.9.4.3
Define the Management VLAN priority value.
When danVlanMngEnable is true outbound management traffic is being tagged,
danVlanMngPrio is used for the priority field of the management tag.
Default is 0.
|
| danWebMngSecurityMode |
Object ID: 1.3.1.4.1.32584.1.1.2.16
This attribute determines the WEB access security mode as follows:
1. ? Secured mode. Only HTTPS is allowed.
2. ? Not secured mode. Only HTTP is allowed.
Default is 1.
|
| hwRev |
Object ID: 1.3.1.4.1.32584.1.1.8.1
Provide information about HW revision
|
| ipRouteAge |
Object ID: 1.3.1.4.1.32584.1.16.1.4.1.1.10
The number of seconds since this route was last
updated or otherwise determined to be correct.
Note that no semantics of `too old' can be implied
except through knowledge of the routing protocol
by which the route was learned.
|
| ipRouteDest |
Object ID: 1.3.1.4.1.32584.1.16.1.4.1.1.1
The destination IP address of this route. An
entry with a value of 0.0.0.0 is considered a
default route. Multiple routes to a single
destination can appear in the table, but access to
such multiple entries is dependent on the table-
access mechanisms defined by the network
management protocol in use.
|
| ipRouteEntry |
Object ID: 1.3.1.4.1.32584.1.16.1.4.1.1
A route to a particular destination.
|
| ipRouteIfIndex |
Object ID: 1.3.1.4.1.32584.1.16.1.4.1.1.2
The index value which uniquely identifies the
local interface through which the next hop of this
route should be reached. The interface identified
by a particular value of this index is the same
interface as identified by the same value of
ifIndex.
|
| ipRouteInfo |
Object ID: 1.3.1.4.1.32584.1.16.1.4.1.1.13
A reference to MIB definitions specific to the
particular routing protocol which is responsible
for this route, as determined by the value
specified in the route's ipRouteProto value. If
this information is not present, its value should
be set to the OBJECT IDENTIFIER { 0 0 }, which is
a syntatically valid object identifier, and any
conformant implementation of ASN.1 and BER must be
able to generate and recognize this value.
|
| ipRouteMask |
Object ID: 1.3.1.4.1.32584.1.16.1.4.1.1.11
Indicate the mask to be logical-ANDed with the
destination address before being compared to the
value in the ipRouteDest field. For those systems
that do not support arbitrary subnet masks, an
agent constructs the value of the ipRouteMask by
determining whether the value of the correspondent
ipRouteDest field belong to a class-A, B, or C
network, and then using one of:
mask network
255.0.0.0 class-A
255.255.0.0 class-B
255.255.255.0 class-C
If the value of the ipRouteDest is 0.0.0.0 (a
default route), then the mask value is also
0.0.0.0. It should be noted that all IP routing
subsystems implicitly use this mechanism.
|
| ipRouteMetric1 |
Object ID: 1.3.1.4.1.32584.1.16.1.4.1.1.3
The primary routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
ipRouteProto value. If this metric is not used,
its value should be set to -1.
|
| ipRouteMetric2 |
Object ID: 1.3.1.4.1.32584.1.16.1.4.1.1.4
An alternate routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
ipRouteProto value. If this metric is not used,
its value should be set to -1.
|
| ipRouteMetric3 |
Object ID: 1.3.1.4.1.32584.1.16.1.4.1.1.5
An alternate routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
ipRouteProto value. If this metric is not used,
its value should be set to -1.
|
| ipRouteMetric4 |
Object ID: 1.3.1.4.1.32584.1.16.1.4.1.1.6
An alternate routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
ipRouteProto value. If this metric is not used,
its value should be set to -1.
|
| ipRouteMetric5 |
Object ID: 1.3.1.4.1.32584.1.16.1.4.1.1.12
An alternate routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
ipRouteProto value. If this metric is not used,
its value should be set to -1.
|
| ipRouteNextHop |
Object ID: 1.3.1.4.1.32584.1.16.1.4.1.1.7
The IP address of the next hop of this route.
(In the case of a route bound to an interface
which is realized via a broadcast media, the value
of this field is the agent's IP address on that
interface.)
|
| ipRouteProto |
Object ID: 1.3.1.4.1.32584.1.16.1.4.1.1.9
The routing mechanism via which this route was
learned. Inclusion of values for gateway routing
protocols is not intended to imply that hosts
should support those protocols.
|
| ipRouteTable |
Object ID: 1.3.1.4.1.32584.1.16.1.4.1
This entity's IP Routing table.
Note: The entire is implemented as Read-Only
|
| ipRouteType |
Object ID: 1.3.1.4.1.32584.1.16.1.4.1.1.8
The type of route. Note that the values
direct(3) and indirect(4) refer to the notion of
direct and indirect routing in the IP
architecture.
Setting this object to the value invalid(2) has
the effect of invalidating the corresponding entry
in the ipRouteTable object. That is, it
effectively dissasociates the destination
identified with said entry from the route
identified with said entry. It is an
implementation-specific matter as to whether the
agent removes an invalidated entry from the table.
Accordingly, management stations must be prepared
to receive tabular information from agents that
corresponds to entries not currently in use.
Proper interpretation of such entries requires
examination of the relevant ipRouteType object.
|
| rfType |
Object ID: 1.3.1.4.1.32584.1.1.4.1
Provide information about the RF Type and the frequency/Power limitations
|
| wmanIf2BsCmnPhyBsEIRP |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.9.1.2.1.1
The EIRP is the equivalent isotropic radiated power of
the base station, which is computed for a simple
single-antenna transmitter.
The Value of wmanIf2BsCmnPhyBsEIRP is affected from danRFPout (RadioPower) and
danRFAntennaGain (antennaGain), i.e. when one of those parameter are
configured the EIRP will reflect the change. Eirp is calculated according to the
following equation:
Eirp = danRFPout + danRFAntennaGain
|
| wmanIf2BsCmnPhyBsId |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.9.1.2.1.5
Base station ID.
|
| wmanIf2BsCmnPhyBsRestartCount |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.9.1.2.1.14
The value is incremented by one whenever BS restarts
|
| wmanIf2BsCmnPhyCellType |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.9.1.2.1.13
This object indicates the size of the cell. Selection of
value is implementation specific.
0 - the smallest cell
15 - the largest cell.
|
| wmanIf2BsCmnPhyCyclicPrefix |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.9.1.2.1.7
The ratio of CP time to 'useful' time.Values
are 1/4, 1/8, 1/16 or 1/32.
|
| wmanIf2BsCmnPhyDownlinkCenterFreq |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.9.1.2.1.4
Downlink center frequency (kHz).
|
| wmanIf2BsCmnPhyDownlinkChannelEntry |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.9.1.2.1
This table provides one row for each downlink channel of
multi-sector BS. An entry in this table exists for each
ifEntry of BS with an ifType of ieee80216WMAN.
|
| wmanIf2BsCmnPhyDownlinkChannelTable |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.9.1.2
This table contains common channel attributes that
charaterize the downlink channels
|
| wmanIf2BsCmnPhyMacVersion |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.9.1.2.1.6
This parameter specifies the version of 802.16 to which
the message originator conforms.
|
| wmanIf2BsCmnPhyMaxEirp |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.9.1.2.1.3
Initial Ranging Max. equivalent isotropic received power
at BS Signed in units of 1 dBm.
The Value of wmanIf2BsCmnPhyMaxEirp is affected from danRFAntennaGain, i.e.
when one of those parameter are configured the MaxEIRP will reflect the change.
MaxEirp is calculated according to the following equation:
maxEirp = Min((danC2nBase + 15), -60) - danRFAntennaGain
|
| wmanIf2BsCmnPhyUplinkCenterFreq |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.9.1.1.1.2
Uplink center frequency (kHz)
|
| wmanIf2BsCmnPhyUplinkChannelEntry |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.9.1.1.1
Uplink channel entry
|
| wmanIf2BsCmnPhyUplinkChannelTable |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.9.1.1
This table contains common channel attributes that
characterize the uplink channels
|
| wmanIf2BsRegisteredSsCount |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.10
This OID represents the Registered CPE count.
|
| wmanIf2BsRegisteredSsEntry |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.1.1
This table provides one row for each SS that has been
registered in the BS. The primary index is the ifIndex
with an ifType of ieee80216WMAN, indicating the BS sector
with which the SS is associated. wmanIf2BsSsUserGroupId,
indicating the user group for HFDD operation,
wmanIf2BsSsMacAddress identifies the SS being registered.
|
| wmanIf2BsRegisteredSsTable |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.1
This table contains the basic capability information
of SSs that have been negotiated and agreed between
BS and SS via REG-REQ and REG-RSP messages. An entry
in this table indicates the SS has entered and registered
into the BS.
|
| wmanIf2BsSs2ndMgmtArqBlockLifetime |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.1.1.13
The maximum time interval an ARQ fragment will be
managed by the transmitter ARQ machine, once
initial transmission of the fragment has occured.
If transmission or retransmission of the fragment
is not acknowledged by the receiver before the
time limit is reached, the fragment is discarded.
A value of 0 means Infinite.
|
| wmanIf2BsSs2ndMgmtArqDnLinkRxDelay |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.1.1.11
The object defines the ARQ receiver delay for
downlink transmission.
|
| wmanIf2BsSs2ndMgmtArqSyncLossTimeout |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.1.1.14
The maximum interval before declaring a loss
of synchronization of the sender and receiver
state machines. A value of 0 means Infinite.
|
| wmanIf2BsSs2ndMgmtArqUpLinkRxDelay |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.1.1.12
The object defines the ARQ receiver delay for
uplink transmission.
|
| wmanIf2BsSsActionsDeReRegSs |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.7.1.6
This object should be implemented as follows:
- When set to actionsDeReRegSs value, instructs BS to
send DREG-CMD to SS with specified action code
- When set to value different than actionsDeReRegSs it
should be ignored
- When read it should return actionsDeReRegSsNoAction
The DREG-CMD message shall be transmitted by the BS on an
SS Basic CID to force the SS to change its access state.
Upon receiving a DREG-CMD, the SS shall take the action
indicated by the action code defined by
wmanIf2BsSsActionsDeReRegSsCode.
|
| wmanIf2BsSsActionsEntry |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.7.1
The action can be requested for registered SS. BS will decide whether the action
is applicable to the SS based on its current state and
execute it or skip it as defined in each action definition.
|
| wmanIf2BsSsActionsMacAddress |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.7.1.1
|
| wmanIf2BsSsActionsResetSs |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.7.1.2
This object should be implemented as follows:
- When set to actionsResetSs value, instructs BS to send
RES-CMD to SS
- When set to value different than actionsResetSs it
should be ignored
- When read it should return actionsResetSsNoAction
The RES-CMD message shall be transmitted by the BS on an
SS Basic CID to force the SS to reset itself,
reinitialize its MAC, and repeat initial system access.
|
| wmanIf2BsSsActionsTable |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.7
This table contains all the actions specified for SSs in
the standard. The actions are routed down to SS using
unsolicited MAC messages: REG-RSP, DREG-REQ and RES-CMD.
The table also contains the parameters of the actions in
cases where they are specified by the standard.
|
| wmanIf2BsSsBasicCid |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.1.1.2
The value of this object indicates the SS's basic CID
that was sent in the RNG-RSP message.
|
| wmanIf2BsSsIpManagementMode |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.1.1.6
The IP management mode parameter dictates whether
the provider intends to manage the SS on an ongoing
basis via IP-based mechanisms.
|
| wmanIf2BsSsMacAddress |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.1.1.1
|
| wmanIf2BsSsMacVersion |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.1.1.24
This parameter specifies the version of 802.16 to which the
message originator conforms.
|
| wmanIf2BsSsManagementSupport |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.1.1.5
This object indicates whether or not the SS is managed.
|
| wmanIf2BsSsPrimaryCid |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.1.1.3
The value of this object indicates the primary CID of the
SS received from the RNG-RSP message.
|
| wmanIf2BsSsSecondaryCid |
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.1.1.4
The value of this object indicates the secondary
management CID present in the REG-RSP message. The value
should be null if the 2nd management connection is not
available.
|
danGenericTrap
Object ID: 1.3.1.4.1.32584.1.4.1.1.2.3
Syntax: Sequence (Structure)
- danGenericTrap
- danLogGenericEventId
- danGenericEventName
- danGenericEventDescription
- danGenericEventSevirity
- danLogGenericEventExtValInt
Access: SNMP Notification
Status: current
- DAN generic trap, including event info.
danAAAClientPort
Object ID: 1.3.1.4.1.32584.1.6.1.3
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-write
Status: current
- AAA Server port (Client listen on this port)
danAAANasName
Object ID: 1.3.1.4.1.32584.1.6.1.4
Syntax: OCTET STRING
Access: read-write
Status: current
- Network access server Name
danAAAServerIP
Object ID: 1.3.1.4.1.32584.1.6.1.1
Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current
- IP address of the AAA server
danAAAServerPort
Object ID: 1.3.1.4.1.32584.1.6.1.2
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-write
Status: current
- AAA Server port (Server listen on this port)
danAccountAction
Object ID: 1.3.1.4.1.32584.1.1.5.1.1.5
Syntax: INTEGER
Constraints:- 1: active
- 2: n_notInService
- 3: n_notReady
- 4: n_createAndGo
- 5: createAndWait
- 6: destroy
Access: read-write
Status: current
- Setting the OID to 'createAndWait' will create a new row with the given account name (the provided Index).
Setting the OID to 'active' will perform activation of the related account according to the given:
- danUserName
- danUserLevel
- danUserPassword
- danUserState
Setting the OID to 'desctroy' shall remove the related account.
Returned value of 'notInService' indicate that the relevant account is currently not in use
(e.g. account is in middle of attribute modifications)
danActiveModeScriptFile
Object ID: 1.3.1.4.1.32584.1.1.7.2
Syntax: OCTET STRING
Access: read-only
Status: current
- Variable contains the name of configuration Mode script executed as part of the initlization process.
danActiveModeScriptId
Object ID: 1.3.1.4.1.32584.1.1.7.1
Syntax: INTEGER
Constraints:- 0: n_modeNone
- 17: modeByBwAndRatio
Access: read-write
Status: current
- Allow to select the Mode script file to be executed as part of initializing process.
Script file is selected based on the value provided in:
- danSelectedScriptBw
- danSelectedScriptRatio
- danSelectedScriptMap
danActiveUserClient
Object ID: 1.3.1.4.1.32584.1.1.5.2.1.3
Syntax: INTEGER
Constraints:- 0: n_clientUndefined
- 1: clientSerialCli
- 2: clientTelnetCli
- 3: clientHTTP
- 4: clientSNMP
Access: read-only
Status: current
- Hold the type of client logged-in to the account one of the following types:
- clientUndefined(1),
- clientSerialCli(2),
- clientTelnetCli(3),
- clientHTTP(4),
- clientSNMP(5)
danActiveUserEntry
Object ID: 1.3.1.4.1.32584.1.1.5.2.1
Syntax: Sequence (Structure)
- danActiveUserInx
- danActiveUserName
- danActiveUserClient
Access: not-accessible
Status: current
- Each entry hold information about logged-in user (active account), the entry hold the client type and have
external index to specific account-username
danActiveUserInx
Object ID: 1.3.1.4.1.32584.1.1.5.2.1.1
Syntax: INTEGER
Constraints: 0..5
Access: read-only
Status: current
- Active user index
danActiveUserName
Object ID: 1.3.1.4.1.32584.1.1.5.2.1.2
Syntax: OCTET STRING
Access: read-only
Status: current
- Username for this active user
danActiveUserTable
Object ID: 1.3.1.4.1.32584.1.1.5.2
Syntax: Sequence of Type (Array)
- DanActiveUserEntry
Access: not-accessible
Status: current
- Table maintains all active (logged-in) users
danAgingTimeout
Object ID: 1.3.1.4.1.32584.1.9.5
Syntax: Gauge
Constraints: 30..3600
Access: read-write
Status: current
- Integer. Aging timeout in seconds. Default value is 300.
danAlarmGenericDeviceId
Object ID: 1.3.1.4.1.32584.1.4.1.2.1.1.1
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-only
Status: current
- Description.
danAlarmGenericEntry
Object ID: 1.3.1.4.1.32584.1.4.1.2.1.1
Syntax: Sequence (Structure)
- danAlarmGenericDeviceId
- danGenericAlarmId
- danGenericAlarmUpdateTime
- danGenericAlarmName
- danGenericAlarmDescription
- danGenericAlarmSevirity
Access: not-accessible
Status: current
- Every entry in the table reflects an Alarm.
danAlarmGenericTable
Object ID: 1.3.1.4.1.32584.1.4.1.2.1
Syntax: Sequence of Type (Array)
- DanAlarmGenericEntry
Access: not-accessible
Status: current
- All active alarms in the system with thier attributes
danBSAuthSsEntry
Object ID: 1.3.1.4.1.32584.1.7.4.4.1
Syntax: Sequence (Structure)
- danBsAuthSsMacAddr
- danBsAuthSsRowStatus
Access: not-accessible
Status: current
- MAC addresses that are admitted to enter the network. It is used when AP is running in standalone mode
(in the integrated mode SMs are authorized on the fly by AAA server)
danBSAuthSsTable
Object ID: 1.3.1.4.1.32584.1.7.4.4
Syntax: Sequence of Type (Array)
- DanBSAuthSsEntry
Access: not-accessible
Status: current
- MAC addresses that are admitted to enter the network. It is used when AP is running in standalone mode
(in the integrated mode SMs are authorized on the fly by AAA server)
danBackupResCommand
Object ID: 1.3.1.4.1.32584.1.3.2.3.3
Syntax: INTEGER
Constraints:- 0: configExport
- 1: configImport
- 2: exportDB
- 3: importDB
Access: read-write
Status: current
- This variable specifies backup command:
configExport(0) - performs exporting of configuration parameters to specified location
configImport(1) - performs importing of configuration parameters from specified location
exportDB(2) - performs exporting of data bases configuration to specified location
importDB(3) - performs importing of data bases configuration from specified location
danBackupResDev
Object ID: 1.3.1.4.1.32584.1.3.2.3.1
Syntax: INTEGER
Constraints:- 0: devFtp
- 1: devTftp
Access: read-write
Status: current
- The variable specifies backup devices used:
devFtp(0) - FTP
devTftp(1) - TFTP
danBackupResPath
Object ID: 1.3.1.4.1.32584.1.3.2.3.2
Syntax: OCTET STRING
Constraints: SIZE (0..256)
Access: read-write
Status: current
- The variable specifies backup file path (excluding the device , which specifed by danbackupResDev)
For example : cfg.txt
danBackupResStatus
Object ID: 1.3.1.4.1.32584.1.3.2.3.4
Syntax: INTEGER
Constraints:- 1: n_configSynced
- 2: n_configUpdated
- 3: n_configSaved
- 4: configSaveCommand
- 5: n_configSavedNUpdated
Access: read-only
Status: current
- Provides status of last performed danBackupResCommand
0 - success
Otherwise - error
danBandWidthRngCode
Object ID: 1.3.1.4.1.32584.1.2.7.4
Syntax: INTEGER
Constraints: 0..255
Access: read-write
Status: current
- Number of Bandwidth Request ranging codes. Possible values are
from 0 to 255.
danBsActSfClassPrf
Object ID: 1.3.1.4.1.32584.1.7.3.1.1.5
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Classification rule ID
danBsActSfDirection
Object ID: 1.3.1.4.1.32584.1.7.3.1.1.3
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- 0-Downlink, 1-Uplink
danBsActSfId
Object ID: 1.3.1.4.1.32584.1.7.3.1.1.2
Syntax: INTEGER
Constraints: 1..1600
Access: read-only
Status: current
- Unique Global SF index
danBsActSfQoSPrf
Object ID: 1.3.1.4.1.32584.1.7.3.1.1.4
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- QoS profile ID
danBsActSfRoutePrf
Object ID: 1.3.1.4.1.32584.1.7.3.1.1.6
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Route rule ID
danBsActSsMacAddr
Object ID: 1.3.1.4.1.32584.1.7.3.1.1.1
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-only
Status: current
- SM MAC address, as a key of the table
danBsActiveSFCount
Object ID: 1.3.1.4.1.32584.1.7.5
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- This OID represents the Active Service Flow count.
danBsActiveSFEntry
Object ID: 1.3.1.4.1.32584.1.7.3.1.1
Syntax: Sequence (Structure)
- danBsActSsMacAddr
- danBsActSfId
- danBsActSfDirection
- danBsActSfQoSPrf
- danBsActSfClassPrf
- danBsActSfRoutePrf
Access: not-accessible
Status: current
- Following table defines the Authorized Service flows .
Note: these service flows will be defined in addition to default user profile
danBsActiveSFTable
Object ID: 1.3.1.4.1.32584.1.7.3.1
Syntax: Sequence of Type (Array)
- DanBsActiveSFEntry
Access: not-accessible
Status: current
- Following table defines the Authorized Service flows .
Note: these service flows will be defined in addition to default user profile
danBsAuthSsMacAddr
Object ID: 1.3.1.4.1.32584.1.7.4.4.1.1
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-create
Status: current
- MAC address of the SM. This MAC address is transmitted by the SM during ranging phase of the NE.
danBsAuthSsRowStatus
Object ID: 1.3.1.4.1.32584.1.7.4.4.1.2
Syntax: INTEGER
Constraints:- 1: active
- 2: n_notInService
- 3: n_notReady
- 4: n_createAndGo
- 5: createAndWait
- 6: destroy
Access: read-create
Status: current
- Allow to control the row, e.g. enable, disable, delete
danBsDlChannelCinrStream0
Object ID: 1.3.1.4.1.32584.1.8.3.1.4
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Reported CINR Stream-0
danBsDlChannelCinrStream1
Object ID: 1.3.1.4.1.32584.1.8.3.1.6
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Reported CINR Stream-1
danBsDlChannelMac
Object ID: 1.3.1.4.1.32584.1.8.3.1.1
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-only
Status: current
- MSS MAC address
danBsDlChannelMeasurementEntry
Object ID: 1.3.1.4.1.32584.1.8.3.1
Syntax: Sequence (Structure)
- danBsDlChannelMac
- danBsDlChannelPollMode
- danBsDlChannelRssiStream0
- danBsDlChannelCinrStream0
- danBsDlChannelRssiStream1
- danBsDlChannelCinrStream1
Access: not-accessible
Status: current
- Measueremt for Down-link channel (as reported by the MSS). Each entery is per MSS
danBsDlChannelMeasurementTable
Object ID: 1.3.1.4.1.32584.1.8.3
Syntax: Sequence of Type (Array)
- DanBsDlChannelMeasurementEntry
Access: not-accessible
Status: current
- Measueremt for Down-link channel (as reported by the MSS). Each entery is per MSS
danBsDlChannelPollMode
Object ID: 1.3.1.4.1.32584.1.8.3.1.2
Syntax: INTEGER
Constraints:- 1: pollModeMSRP
- 2: pollModeCQICH
Access: read-only
Status: current
- Polling method:
- MSRP
- CQICH
danBsDlChannelRssiStream0
Object ID: 1.3.1.4.1.32584.1.8.3.1.3
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Reported RSSI Stream-0
danBsDlChannelRssiStream1
Object ID: 1.3.1.4.1.32584.1.8.3.1.5
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Reported RSSI Stream-1
danBsDlMcs16Qam12MimoACount
Object ID: 1.3.1.4.1.32584.1.8.6.1.9
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of bytes sent in the downlink, in MCS state '16QAM 1/2 MIMO A'.
danBsDlMcs16Qam34MimoACount
Object ID: 1.3.1.4.1.32584.1.8.6.1.8
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of bytes sent in the downlink, in MCS state '16QAM 3/4 MIMO A'.
danBsDlMcs64Qam12MimoACount
Object ID: 1.3.1.4.1.32584.1.8.6.1.7
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of bytes sent in the downlink, in MCS state '64QAM 1/2 MIMO A'.
danBsDlMcs64Qam23MimoACount
Object ID: 1.3.1.4.1.32584.1.8.6.1.6
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of bytes sent in the downlink, in MCS state '64QAM 2/3 MIMO A'.
danBsDlMcs64Qam34MimoACount
Object ID: 1.3.1.4.1.32584.1.8.6.1.5
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of bytes sent in the downlink, in MCS state '64QAM 3/4 MIMO A'.
danBsDlMcs64Qam56MimoACount
Object ID: 1.3.1.4.1.32584.1.8.6.1.4
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of bytes sent in the downlink, in MCS state '64QAM 5/6 MIMO A'.
danBsDlMcs64Qam56MimoBCount
Object ID: 1.3.1.4.1.32584.1.8.6.1.3
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of bytes sent in the downlink, in MCS state '64QAM 5/6 MIMO B'.
danBsDlMcsEntry
Object ID: 1.3.1.4.1.32584.1.8.6.1
Syntax: Sequence (Structure)
- danBsDlMcsMacAddr
- danBsDlMcsSfId
- danBsDlMcs64Qam56MimoBCount
- danBsDlMcs64Qam56MimoACount
- danBsDlMcs64Qam34MimoACount
- danBsDlMcs64Qam23MimoACount
- danBsDlMcs64Qam12MimoACount
- danBsDlMcs16Qam34MimoACount
- danBsDlMcs16Qam12MimoACount
- danBsDlMcsQpsk34MimoACount
- danBsDlMcsQpsk12MimoACount
Access: not-accessible
Status: current
- Each entry refers to unique MSS and SFID registered to the BS.
danBsDlMcsMacAddr
Object ID: 1.3.1.4.1.32584.1.8.6.1.1
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-only
Status: current
- MAC Address of a registered MSS.
danBsDlMcsQpsk12MimoACount
Object ID: 1.3.1.4.1.32584.1.8.6.1.11
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of bytes sent in the downlink, in MCS state 'QPSK 1/2 MIMO A'.
danBsDlMcsQpsk34MimoACount
Object ID: 1.3.1.4.1.32584.1.8.6.1.10
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of bytes sent in the downlink, in MCS state 'QPSK 3/4 MIMO A'.
danBsDlMcsSfId
Object ID: 1.3.1.4.1.32584.1.8.6.1.2
Syntax: INTEGER
Constraints: 1..1600
Access: read-only
Status: current
- SFID of the subscriber.
danBsDlMcsTable
Object ID: 1.3.1.4.1.32584.1.8.6
Syntax: Sequence of Type (Array)
- DanBsDlMcsEntry
Access: not-accessible
Status: current
- This table contains Downlink MCS counters, for each registered MSS.
danBsIdentitySel
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.3
Syntax: INTEGER
Constraints:- 0: idSelWmanMac
- 1: idSelGmacMac
- 2: idSelMmacMac
- 3: idSelBsId
Access: read-write
Status: current
- Select which Identity to use as part of Event message in the Mac address field.
- idSelWmanMac: Use Boards Wman MAC address
- idSelGmacMac: Use Boards Gmac MAC address
- idSelMmacMac: Use Boards Mmac MAC address
- idSelBsId: Use Boards BsId (also 6 bytes)
danBsL2MacLearned
Object ID: 1.3.1.4.1.32584.1.8.5.1
Syntax: INTEGER
Constraints: 1..6000
Access: read-only
Status: current
- 32 bit number.
Contains the total number of active Mac addressed
learned by the AP acting as a learning bridge.
Valid range is from 0 to 6000 entries.
danBsL2MacLearnedEntry
Object ID: 1.3.1.4.1.32584.1.8.5.4.1
Syntax: Sequence (Structure)
- danBsL2MssId
- danBsL2MssLearnedAddr
- danBsL2MssLearnedTime
Access: not-accessible
Status: current
- Description.
danBsL2MacLearnedTable
Object ID: 1.3.1.4.1.32584.1.8.5.4
Syntax: Sequence of Type (Array)
- DanBsL2MacLearnedEntry
Access: not-accessible
Status: current
- The table contains an entry for each learned MAC address (Ethernet station)
danBsL2MssId
Object ID: 1.3.1.4.1.32584.1.8.5.4.1.1
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-only
Status: current
- SM MAC address
danBsL2MssLearnedAddr
Object ID: 1.3.1.4.1.32584.1.8.5.4.1.2
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-only
Status: current
- Learned MAC address
danBsL2MssLearnedTime
Object ID: 1.3.1.4.1.32584.1.8.5.4.1.3
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Time interval since last packet from this station has been received
danBsL2NonAssocMacBcst
Object ID: 1.3.1.4.1.32584.1.8.5.3
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- 32 bit number.
Contains the total number of non-associated packets broadcast.
This is relevant when configured to broadcast non-associated dest Macs addresses.
Valid range is 32bit number.
danBsL2NonAssocMacDrop
Object ID: 1.3.1.4.1.32584.1.8.5.2
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- 32 bit number.
Contains the total number of non-associated packets dropped.
This is relevant when configured to drop non-associated dest Macs addresses.
Valid range is 32bit number.
danBsMcsMacAddr
Object ID: 1.3.1.4.1.32584.1.8.16.1.1
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-only
Status: current
- Unique MAC Address of a registered BS.
danBsMcsStateDl
Object ID: 1.3.1.4.1.32584.1.8.16.1.2
Syntax: INTEGER
Constraints:- 10: qam64_5_6
- 3: qpsk_1_2
- 4: qpsk_3_4
- 5: qam16_1_2
- 6: qam16_3_4
- 7: qam64_1_2
- 8: qam64_2_3
- 9: qam64_3_4
Access: read-only
Status: current
- MCS State in the Downlink.
danBsMcsStateDlAntMethod
Object ID: 1.3.1.4.1.32584.1.8.16.1.3
Syntax: INTEGER
Constraints:- 0: siso
- 1: mimo_b
- 2: mimo_a
Access: read-only
Status: current
- Antenna Method in the Downlink.
danBsMcsStateDlCinr
Object ID: 1.3.1.4.1.32584.1.8.16.1.4
Syntax: INTEGER
Access: read-only
Status: current
- Downlink Physical CINR.
danBsMcsStateEntry
Object ID: 1.3.1.4.1.32584.1.8.16.1
Syntax: Sequence (Structure)
- danBsMcsMacAddr
- danBsMcsStateDl
- danBsMcsStateDlAntMethod
- danBsMcsStateDlCinr
- danBsMcsStateUl
- danBsMcsStateUlAntMethod
Access: not-accessible
Status: current
- Each entry represents a unique registered BS.
danBsMcsStateTable
Object ID: 1.3.1.4.1.32584.1.8.16
Syntax: Sequence of Type (Array)
- DanBsMcsStateEntry
Access: not-accessible
Status: current
- Each entry of this table represents the MAC Address of a registered BS, The DL & UL MCS State and Antenna Method.
danBsMcsStateUl
Object ID: 1.3.1.4.1.32584.1.8.16.1.5
Syntax: INTEGER
Constraints:- 10: qam64_5_6
- 3: qpsk_1_2
- 4: qpsk_3_4
- 5: qam16_1_2
- 6: qam16_3_4
- 7: qam64_1_2
- 8: qam64_2_3
- 9: qam64_3_4
Access: read-only
Status: current
- MCS State in the Uplink.
danBsMcsStateUlAntMethod
Object ID: 1.3.1.4.1.32584.1.8.16.1.6
Syntax: INTEGER
Constraints:- 0: siso
- 1: mimo_b
- 2: mimo_a
Access: read-only
Status: current
- Antenna Method in the Uplink.
danBsProvClsProfileIndex
Object ID: 1.3.1.4.1.32584.1.7.4.2.1.1
Syntax: INTEGER
Constraints: 1..100
Access: read-write
Status: current
- A profile index of the classifier profile
danBsProvClsProfileType
Object ID: 1.3.1.4.1.32584.1.7.4.2.1.3
Syntax: INTEGER
Constraints:- 1: ipTos
- 10: vlanPriority
- 11: vlanId
- 3: ipMaskedSrcAddr
- 4: ipMaskedDestAddr
- 7: destMacAddr
- 8: srcMacAddr
Access: read-create
Status: current
- One of the supported classification types:
1. ipTos(1),
2. ipMaskedSrcAddr(3),
3. ipMaskedDestAddr(4),
4. destMacAddr(7),
5. srcMacAddr(8),
6. vlanPriority(10),
7. vlanId(11)
danBsProvClsRuleEntry
Object ID: 1.3.1.4.1.32584.1.7.4.2.1
Syntax: Sequence (Structure)
- danBsProvClsProfileIndex
- danBsProvClsRuleIndex
- danBsProvClsProfileType
- danBsProvClsRuleIpDscp
- danBsProvClsRuleIpSrcAddr
- danBsProvClsRuleIpSrcMask
- danBsProvClsRuleVlanId
- danBsProvClsRuleVlanPri
- danBsProvClsRuleMacSrcAddr
- danBsProvClsRuleMacDestAddr
- danBsProvClsRuleRowStatus
Access: not-accessible
Status: current
- This table provides one row for each packet classifier
rule.
danBsProvClsRuleIndex
Object ID: 1.3.1.4.1.32584.1.7.4.2.1.2
Syntax: INTEGER
Constraints: 1..65535
Access: read-create
Status: current
- Rule index, the rule index is unique. Several rule may be assiciated with a single profile
danBsProvClsRuleIpDscp
Object ID: 1.3.1.4.1.32584.1.7.4.2.1.4
Syntax: INTEGER
Constraints: 0..255
Access: read-create
Status: current
- The low value of a range of TOS byte values. If the
referenced parameter is not present in a classifier, this
object reports the value of 0.
danBsProvClsRuleIpSrcAddr
Object ID: 1.3.1.4.1.32584.1.7.4.2.1.5
Syntax: STRING
Constraints: SIZE (4)
Access: read-create
Status: current
- This object specifies the value of the IP Source Address
required for packets to match this rule. An IP packet
matches the rule when the packet ip source address bitwise
ANDed with the wmanIf2fBsProvClsfRuleIpSrcMask value
equals the wmanIf2fBsProvClsfRuleIpSrcAddr value.
If the referenced parameter is not present in a classifier,
this object reports the value of 0.0.0.0.
danBsProvClsRuleIpSrcMask
Object ID: 1.3.1.4.1.32584.1.7.4.2.1.6
Syntax: Gauge
Constraints: 0..32
Access: read-create
Status: current
- This object specifies which bits of a packet's IP Source
Address that are compared to match this rule. An IP packet
matches the rule when the packet source address bitwise
ANDed with the
wmanIf2fBsProvClsfRuleIpSrcMask value equals the
wmanIf2fBsProvClsfRuleIpSrcAddr value.
If the referenced parameter is not present in a classifier,
this object reports the value of 0.0.0.0.
danBsProvClsRuleMacDestAddr
Object ID: 1.3.1.4.1.32584.1.7.4.2.1.11
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-create
Status: current
- This object specifies the value of the Mac Destination Address required for packets t
o match this rule. If the referenced parameter
is not present in a classifier, this object reports the value of 0:0:0:0:0:0.
danBsProvClsRuleMacSrcAddr
Object ID: 1.3.1.4.1.32584.1.7.4.2.1.10
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-create
Status: current
- This object specifies the value of the Mac Source Address required for packets to match this rule.
f the referenced parameter is not present in a classifier, this object reports the value of 0:0:0:0:0:0.
danBsProvClsRuleRowStatus
Object ID: 1.3.1.4.1.32584.1.7.4.2.1.20
Syntax: INTEGER
Constraints:- 1: active
- 2: n_notInService
- 3: n_notReady
- 4: n_createAndGo
- 5: createAndWait
- 6: destroy
Access: read-create
Status: current
- This object is used to create a new row or modify or
delete an existing row in this table.
If the implementator of this MIB has choosen not
to implement 'dynamic assignment' of profiles, this
object is not useful and should return noSuchName
upon SNMP request.
danBsProvClsRuleTable
Object ID: 1.3.1.4.1.32584.1.7.4.2
Syntax: Sequence of Type (Array)
- DanBsProvClsRuleEntry
Access: not-accessible
Status: current
- This table contains provisioned classifier rules associated
with service flows.
danBsProvClsRuleVlanId
Object ID: 1.3.1.4.1.32584.1.7.4.2.1.7
Syntax: INTEGER
Constraints: 0..4095
Access: read-create
Status: current
- This object applies only to Ethernet frames using the
802.1P/Q tag header.
If this object's value is nonzero, tagged packets must
have a VLAN Identifier that matches the value in order
to match the rule.
Only the least significant 12 bits of this object's
value are valid.
If the referenced parameter is not present in the
classifier, the value of this object is reported as 0.
danBsProvClsRuleVlanPri
Object ID: 1.3.1.4.1.32584.1.7.4.2.1.9
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-create
Status: current
- This object applies only to Ethernet frames using the 802.1P/Q tag heade.
If this object's value is nonzero, tagged packets must have a VLAN PCP (priority) that matches the value
in order to match the rule. Only the 3 User priority bis of this object's value are valid. If the referenced parameter
is not present in the classifier, the value of this object is reported as 0.
This classifier is only applicable in Layer-2 operation mode.
danBsProvSfClsPrf
Object ID: 1.3.1.4.1.32584.1.7.4.3.1.5
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-create
Status: current
- Classification rule ID, an entry in 'danIf2fBsProvClassifierProfileTable'
danBsProvSfDirection
Object ID: 1.3.1.4.1.32584.1.7.4.3.1.3
Syntax: INTEGER
Constraints:- 0: downLink
- 1: upLink
Access: read-create
Status: current
- 0-Downlink, 1-Uplink
danBsProvSfEntry
Object ID: 1.3.1.4.1.32584.1.7.4.3.1
Syntax: Sequence (Structure)
- danBsProvSsMacAddr
- danBsProvSfIndex
- danBsProvSfDirection
- danBsProvSfQoSPrf
- danBsProvSfClsPrf
- danBsProvSfRoutePrf
- danBsProvSfId
- danBsProvSfRowStatus
Access: not-accessible
Status: current
- FEntry defines the Authorized Service flows to be automatically provisioned by AP in standalone system mode.
Note: these service flows will be defined in addition to default user profile
danBsProvSfId
Object ID: 1.3.1.4.1.32584.1.7.4.3.1.7
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- This is Service Flow Id unique in BS scope
danBsProvSfIndex
Object ID: 1.3.1.4.1.32584.1.7.4.3.1.2
Syntax: INTEGER
Constraints: 1..1600
Access: read-create
Status: current
- SF index in SM context as added into the table (danBsProvSfIndex + danBsProvSsMacAddr) form a unique table index
danBsProvSfQoSPrf
Object ID: 1.3.1.4.1.32584.1.7.4.3.1.4
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-create
Status: current
- QoS profile ID
danBsProvSfRouteDirection
Object ID: 1.3.1.4.1.32584.1.7.4.6.1.12
Syntax: INTEGER
Constraints:- 0: downLink
- 1: upLink
Access: read-create
Status: current
- 0-Downlink, 1-Uplink
danBsProvSfRouteEntry
Object ID: 1.3.1.4.1.32584.1.7.4.6.1
Syntax: Sequence (Structure)
- danBsProvSfRouteProfileIndex
- danBsProvSfRouteRuleIndex
- danBsProvSfRouteRuleMap
- danBsProvSfRouteRuleIpDscp
- danBsProvSfRouteRuleVlanId
- danBsProvSfRouteRuleIpAddr
- danBsProvSfRouteRuleIpMask
- danBsProvSfRouteRuleMinPort
- danBsProvSfRouteRuleMaxPort
- danBsProvSfRouteRuleMacAddr
- danBsProvSfRouteRuleGre
- danBsProvSfRouteDirection
- danBsProvSfRouteUsageStat
- danBsProvSfRouteRuleRowStatus
Access: not-accessible
Status: current
- This table provides one row for each packet classifier
rule.
danBsProvSfRoutePrf
Object ID: 1.3.1.4.1.32584.1.7.4.3.1.6
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-create
Status: current
- For future usage Classification rule ID, an entry in 'danBsProvSfRouteTable', use value 0
danBsProvSfRouteProfileIndex
Object ID: 1.3.1.4.1.32584.1.7.4.6.1.1
Syntax: INTEGER
Constraints: 1..100
Access: read-write
Status: current
- A unique index of the route profile
danBsProvSfRouteRuleGre
Object ID: 1.3.1.4.1.32584.1.7.4.6.1.11
Syntax: Gauge
Constraints: 0..4294967295
Access: read-create
Status: current
- Description.
danBsProvSfRouteRuleIndex
Object ID: 1.3.1.4.1.32584.1.7.4.6.1.2
Syntax: INTEGER
Constraints: 1..65535
Access: read-create
Status: current
- Roue rule Index
danBsProvSfRouteRuleIpAddr
Object ID: 1.3.1.4.1.32584.1.7.4.6.1.6
Syntax: STRING
Constraints: SIZE (4)
Access: read-create
Status: current
- This object specifies the value of the IP Source Address
required for packets to match this rule. An IP packet
matches the rule when the packet ip source address bitwise
ANDed with the wmanIf2fBsProvClsfRuleIpSrcMask value
equals the wmanIf2fBsProvClsfRuleIpSrcAddr value.
If the referenced parameter is not present in a classifier,
this object reports the value of 0.0.0.0.
danBsProvSfRouteRuleIpDscp
Object ID: 1.3.1.4.1.32584.1.7.4.6.1.4
Syntax: Gauge
Constraints: 0..255
Access: read-create
Status: current
- The dcsp value of the TOS byte values. If the
referenced parameter is not present in a classifier, this
object reports the value of 0.
danBsProvSfRouteRuleIpMask
Object ID: 1.3.1.4.1.32584.1.7.4.6.1.7
Syntax: Gauge
Constraints: 0..32
Access: read-create
Status: current
- This object specifies which bits of a packet's IP Source
Address that are compared to match this rule. An IP packet
matches the rule when the packet source address bitwise
ANDed with the
wmanIf2fBsProvClsfRuleIpSrcMask value equals the
wmanIf2fBsProvClsfRuleIpSrcAddr value.
If the referenced parameter is not present in a classifier,
this object reports the value of 0.0.0.0.
danBsProvSfRouteRuleMacAddr
Object ID: 1.3.1.4.1.32584.1.7.4.6.1.10
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-create
Status: current
- MAC address associated with Rule Map routeDestMacAddr
danBsProvSfRouteRuleMap
Object ID: 1.3.1.4.1.32584.1.7.4.6.1.3
Syntax: INTEGER
Constraints:- 0: routeNone
- 1: routeMaskedDestAddr
- 10: routeGre
- 2: routeMaskedSrcAddr
- 3: routeIpTos
- 4: routeVlanId
- 5: routeUdpDestPorts
- 6: routeUdpSrcPorts
- 7: routeTcpDestPorts
- 8: routeTcpSrcPorts
- 9: routeDestMacAddr
Access: read-create
Status: current
- Define the route type applicable to the specific row, type value is one of the followings:
- routeMaskedDestAddr(1),
- routeMaskedSrcAddr(2),
- routeIpTos(3),
- routeVlanId(4),
- routeUdpDestPorts(5),
- routeUdpSrcPorts(6),
- routeTcpDestPorts(7),
- routeTcpSrcPorts(8),
- routeDestMacAddr(9),
- routeGre(10)
danBsProvSfRouteRuleMaxPort
Object ID: 1.3.1.4.1.32584.1.7.4.6.1.9
Syntax: Gauge
Constraints: 0..4294967295
Access: read-create
Status: current
- The maximumport number associated with port range, relevant for rule maps
- routeUdpDestPorts(5),
- routeUdpSrcPorts(6),
- routeTcpDestPorts(7),
- routeTcpSrcPorts(8),
danBsProvSfRouteRuleMinPort
Object ID: 1.3.1.4.1.32584.1.7.4.6.1.8
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-create
Status: current
- The minimum port number associated with port range, relevant for rule maps
- routeUdpDestPorts(5),
- routeUdpSrcPorts(6),
- routeTcpDestPorts(7),
- routeTcpSrcPorts(8),
danBsProvSfRouteRuleRowStatus
Object ID: 1.3.1.4.1.32584.1.7.4.6.1.14
Syntax: INTEGER
Constraints:- 1: active
- 2: n_notInService
- 3: n_notReady
- 4: n_createAndGo
- 5: createAndWait
- 6: destroy
Access: read-create
Status: current
- This object is used to create a new row or modify or
delete an existing row in this table.
If the implementator of this MIB has choosen not
to implement 'dynamic assignment' of profiles, this
object is not useful and should return noSuchName
upon SNMP request.
danBsProvSfRouteRuleVlanId
Object ID: 1.3.1.4.1.32584.1.7.4.6.1.5
Syntax: Gauge
Constraints: 0..4095
Access: read-create
Status: current
- This object applies only to Ethernet frames using the
802.1P/Q tag header.
If this object's value is nonzero, tagged packets must
have a VLAN Identifier that matches the value in order
to match the rule.
Only the least significant 12 bits of this object's
value are valid.
If the referenced parameter is not present in the
classifier, the value of this object is reported as 0.
danBsProvSfRouteTable
Object ID: 1.3.1.4.1.32584.1.7.4.6
Syntax: Sequence of Type (Array)
- DanBsProvSfRouteEntry
Access: not-accessible
Status: current
- This table contains provisioned classifier rules associated
with service flows.
danBsProvSfRouteUsageStat
Object ID: 1.3.1.4.1.32584.1.7.4.6.1.13
Syntax: INTEGER
Constraints:- 0: routeProfNone
- 1: routeProfPending
- 2: routeProfInUse
Access: read-only
Status: current
- Indicate the actual Usage status of this rule as Pending or Active
danBsProvSfRowStatus
Object ID: 1.3.1.4.1.32584.1.7.4.3.1.8
Syntax: INTEGER
Constraints:- 1: active
- 2: n_notInService
- 3: n_notReady
- 4: n_createAndGo
- 5: createAndWait
- 6: destroy
Access: read-create
Status: current
- Allow to control the row, e.g. enable, disable, delete
danBsProvSfTable
Object ID: 1.3.1.4.1.32584.1.7.4.3
Syntax: Sequence of Type (Array)
- DanBsProvSfEntry
Access: not-accessible
Status: current
- Following table defines the Authorized Service flows to be automatically provisioned by AP in standalone system mode.
Note: these service flows will be defined in addition to default user profile
danBsProvSsMacAddr
Object ID: 1.3.1.4.1.32584.1.7.4.3.1.1
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-create
Status: current
- SM MAC address, as a key of the table
danBsSfClsVlanGlobalMask
Object ID: 1.3.1.4.1.32584.1.7.1.4
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-write
Status: obsolete
- Description.
danBsSfDefaultDlQosProfile
Object ID: 1.3.1.4.1.32584.1.7.1.2
Syntax: INTEGER
Constraints: 0..256
Access: read-write
Status: current
- Set the Default DL QoS profile used when a new intial default connection is made
danBsSfDefaultUlQosProfile
Object ID: 1.3.1.4.1.32584.1.7.1.3
Syntax: INTEGER
Constraints: 0..255
Access: read-write
Status: current
- Set the Default UL QoS profile used when a new intial default connection is made
danBsSfMccQosProfileCir
Object ID: 1.3.1.4.1.32584.1.7.1.6
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-write
Status: current
- Set the MIR value for MCC QoS profile
danBsSfMccQosProfileMir
Object ID: 1.3.1.4.1.32584.1.7.1.5
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-write
Status: current
- Set the MIR value for MCC QoS profile
danBsSfRoutingMode
Object ID: 1.3.1.4.1.32584.1.7.1.1
Syntax: INTEGER
Constraints:- 1: routingNone
- 2: routingIp
- 3: routingMacDest
- 4: routingVlan
Access: read-only
Status: current
- Routing mode (R/O)
danBsUlChannelCinrStream0
Object ID: 1.3.1.4.1.32584.1.8.2.1.5
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Measured stream-0 CINR
danBsUlChannelCinrStream1
Object ID: 1.3.1.4.1.32584.1.8.2.1.7
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Measured stream-1 CINR
danBsUlChannelMac
Object ID: 1.3.1.4.1.32584.1.8.2.1.1
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-only
Status: current
- MSS MAC address
danBsUlChannelMeasurementEntry
Object ID: 1.3.1.4.1.32584.1.8.2.1
Syntax: Sequence (Structure)
- danBsUlChannelMac
- danBsUlChannelRadioIndex
- danBsUlChannelRssiStream0
- danBsUlChannelCinrStream0
- danBsUlChannelRssiStream1
- danBsUlChannelCinrStream1
Access: not-accessible
Status: current
- Measueremt for Uplink channel (as measured by the BS). Each entery is per MSS and Radio
danBsUlChannelMeasurementTable
Object ID: 1.3.1.4.1.32584.1.8.2
Syntax: Sequence of Type (Array)
- DanBsUlChannelMeasurementEntry
Access: not-accessible
Status: current
- Measueremt for Uplink channel (as measured by the BS). Each entery is per MSS and Radio
danBsUlChannelRadioIndex
Object ID: 1.3.1.4.1.32584.1.8.2.1.2
Syntax: INTEGER
Constraints: 0..5
Access: read-only
Status: current
- Radio (Antenna) Index
danBsUlChannelRssiStream0
Object ID: 1.3.1.4.1.32584.1.8.2.1.4
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Measured stream-0 RSSI
danBsUlChannelRssiStream1
Object ID: 1.3.1.4.1.32584.1.8.2.1.6
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Measured stream-1 RSSI
danBsUlMcs16Qam12Count
Object ID: 1.3.1.4.1.32584.1.8.7.1.8
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of bytes sent in the uplink, in MCS state '16QAM 1/2'.
danBsUlMcs16Qam34Count
Object ID: 1.3.1.4.1.32584.1.8.7.1.7
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of bytes sent in the uplink, in MCS state '16QAM 3/4'.
danBsUlMcs64Qam12Count
Object ID: 1.3.1.4.1.32584.1.8.7.1.6
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of bytes sent in the uplink, in MCS state '64QAM 1/2'.
danBsUlMcs64Qam23Count
Object ID: 1.3.1.4.1.32584.1.8.7.1.5
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of bytes sent in the uplink, in MCS state '64QAM 2/3'.
danBsUlMcs64Qam34Count
Object ID: 1.3.1.4.1.32584.1.8.7.1.4
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of bytes sent in the uplink, in MCS state '64QAM 3/4'.
danBsUlMcs64Qam56Count
Object ID: 1.3.1.4.1.32584.1.8.7.1.3
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of bytes sent in the uplink, in MCS state '64QAM 5/6'.
danBsUlMcsEntry
Object ID: 1.3.1.4.1.32584.1.8.7.1
Syntax: Sequence (Structure)
- danBsUlMcsMacAddr
- danBsUlMcsSfId
- danBsUlMcs64Qam56Count
- danBsUlMcs64Qam34Count
- danBsUlMcs64Qam23Count
- danBsUlMcs64Qam12Count
- danBsUlMcs16Qam34Count
- danBsUlMcs16Qam12Count
- danBsUlMcsQpsk34Count
- danBsUlMcsQpsk12Count
Access: not-accessible
Status: current
- Each entry refers to unique MSS registered to the BS.
danBsUlMcsMacAddr
Object ID: 1.3.1.4.1.32584.1.8.7.1.1
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-only
Status: current
- MAC Address of a registered MSS.
danBsUlMcsQpsk12Count
Object ID: 1.3.1.4.1.32584.1.8.7.1.10
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of bytes sent in the uplink, in MCS state 'QPSK 1/2'.
danBsUlMcsQpsk34Count
Object ID: 1.3.1.4.1.32584.1.8.7.1.9
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of bytes sent in the uplink, in MCS state 'QPSK 3/4'.
danBsUlMcsSfId
Object ID: 1.3.1.4.1.32584.1.8.7.1.2
Syntax: INTEGER
Constraints: 1..1600
Access: read-only
Status: current
- Total number of bytes sent in the uplink, in MCS state '64QAM 5/6'.
danBsUlMcsTable
Object ID: 1.3.1.4.1.32584.1.8.7
Syntax: Sequence of Type (Array)
- DanBsUlMcsEntry
Access: not-accessible
Status: current
- This table contains Uplink MCS counters, for each registered MSS.
danBsUsageRecordBytesCount
Object ID: 1.3.1.4.1.32584.1.8.1.1.5
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total bytes count for the given MSS and SF ID
danBsUsageRecordBytesDropped
Object ID: 1.3.1.4.1.32584.1.8.1.1.7
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total bytes dropped for the given MSS and SF ID
danBsUsageRecordCid
Object ID: 1.3.1.4.1.32584.1.8.1.1.3
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Connection Identifier for this entry
danBsUsageRecordEntry
Object ID: 1.3.1.4.1.32584.1.8.1.1
Syntax: Sequence (Structure)
- danBsUsageRecordMacAddr
- danBsUsageRecordSfId
- danBsUsageRecordCid
- danBsUsageRecordPcktsCount
- danBsUsageRecordBytesCount
- danBsUsageRecordPcktsDropped
- danBsUsageRecordBytesDropped
Access: not-accessible
Status: current
- Performance Monitoring table, each entry represent MSS and its Service Flow
danBsUsageRecordMacAddr
Object ID: 1.3.1.4.1.32584.1.8.1.1.1
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-only
Status: current
- MSS MAC address
danBsUsageRecordPcktsCount
Object ID: 1.3.1.4.1.32584.1.8.1.1.4
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total packeges count for the given MSS and SF ID
danBsUsageRecordPcktsDropped
Object ID: 1.3.1.4.1.32584.1.8.1.1.6
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total packages dropped for the given MSS and SF ID
danBsUsageRecordSfId
Object ID: 1.3.1.4.1.32584.1.8.1.1.2
Syntax: INTEGER
Constraints: 1..1600
Access: read-only
Status: current
- Service Flow Id
danBsUsageRecordTable
Object ID: 1.3.1.4.1.32584.1.8.1
Syntax: Sequence of Type (Array)
- DanBsUsageRecordEntry
Access: not-accessible
Status: current
- Performance Monitoring table, each entry represent MSS and its Service Flow
danC2nBase
Object ID: 1.3.1.4.1.32584.1.2.3.1
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-write
Status: current
- C/N base configuration
Note:
-------
1. The Value of wmanIf2BsCmnPhyMaxEirp is affected from danRFAntennaGain, i.e.
when one of that parameter is configured the MaxEIRP will reflect the change.
MaxEirp is calculated according to the following equation:
maxEirp = Min((danC2nBase + 15), -60) - danRFAntennaGain
danRFPout and danRFAntennaGain are of the 'firts' (the lowe index radio) mouned radio
2. The LM nominal power is also affected by the setting of danC2nBase according to the
following equation:
LM_power_nominal = 120 + danC2nBase + 87)*4);
danCenterFreq
Object ID: 1.3.1.4.1.32584.1.1.4.3
Syntax: INTEGER
Constraints: 2000000..6000000
Access: read-write
Status: current
- Setting danCenterFrequencywill result in changing the frequency of all mounted Radios.
danClearCounters
Object ID: 1.3.1.4.1.32584.1.8.4
Syntax: INTEGER
Constraints:- 0: n_cmdNone
- 1: cmdClear
Access: read-write
Status: current
- Setting this OID to cmdClear shall clear all Service flow counters.
When it is read the value cmdNone is always returned
danClearStats
Object ID: 1.3.1.4.1.32584.1.8.15
Syntax: INTEGER
Constraints:- 0: clearNone
- 1: clearDlMcsStats
- 2: clearUlMcsStats
- 3: clearHarqStats
- 4: clearRxpStats
- 5: clearEthStats
Access: read-write
Status: current
- Resets the DL MCS, stats to zero.
danConfigurationStatus
Object ID: 1.3.1.4.1.32584.1.3.2.1
Syntax: INTEGER
Constraints:- 1: n_configSynced
- 2: n_configUpdated
- 3: n_configSaved
- 4: configSaveCommand
- 5: n_configSavedNUpdated
Access: read-write
Status: current
- The variable provide status information about the system's configuration parameters.
configSynced(1) - Indicate that the software currently running is in full sync with the configuration parameters saved in the non-volatile memory (flash)
configNotSyncedUpdated(2) - Indicate that the software currently running is NOT in sync with the configuration parameters saved in the non-volatile memory, but the modified attributes
are saved in the non-voletile memory(will be affective on the next system startup).
configNotSyncedNotUpdated(3) - Indicate that the software currently running is NOT in sync with the configuration parameters saved in the non-volatile memory, and there are attributes
modified in the RAM (shadow) and not yet saved in the non-volatile memory.
configSave(4) - Command the system to save all attributes from the RAM (shadow) to the non-volatile memory.
danDNSPrimary
Object ID: 1.3.1.4.1.32584.1.1.2.6
Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current
- The IP address of the Primary DNS server
danDNSSecondary
Object ID: 1.3.1.4.1.32584.1.1.2.7
Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current
- Description.
danDNSStatus
Object ID: 1.3.1.4.1.32584.1.1.2.8
Syntax: INTEGER
Constraints:- 0: enable
- 1: disable
Access: read-write
Status: current
- Disable DNS unctionality (true if telnet is disabled)
danDefaultGateway
Object ID: 1.3.1.4.1.32584.1.1.2.2
Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current
- AP default gateway
danDevBsCertificateEnable
Object ID: 1.3.1.4.1.32584.1.3.9.1.1.8
Syntax: INTEGER
Constraints:- 1: active
- 2: n_notInService
- 3: n_notReady
- 4: n_createAndGo
- 5: createAndWait
- 6: destroy
Access: read-only
Status: current
- Status of the certificate.
danDevBsCertificateEntry
Object ID: 1.3.1.4.1.32584.1.3.9.1.1
Syntax: Sequence (Structure)
- danDevBsCertificateIndex
- danDevBsCertificateName
- danDevBsCertificateIssuer
- danDevBsCertificateFingerprint
- danDevBsCertificateExpiration
- danDevBsCertificateType
- danDevBsCertificateServiceflag
- danDevBsCertificateEnable
Access: not-accessible
Status: current
- Certificate Management entry per registerd certificate.
danDevBsCertificateExpiration
Object ID: 1.3.1.4.1.32584.1.3.9.1.1.5
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Displays the expiration date of the certificate.
danDevBsCertificateFingerprint
Object ID: 1.3.1.4.1.32584.1.3.9.1.1.4
Syntax: OCTET STRING
Access: read-only
Status: current
- Displays the fingerprint of the certificate
calculated on the certificate itself.
danDevBsCertificateIndex
Object ID: 1.3.1.4.1.32584.1.3.9.1.1.1
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Index of the Certificate Table.
danDevBsCertificateIssuer
Object ID: 1.3.1.4.1.32584.1.3.9.1.1.3
Syntax: OCTET STRING
Access: read-only
Status: current
- Displays the common name of the certificate
issuer as described in the x509 issuer field.
danDevBsCertificateName
Object ID: 1.3.1.4.1.32584.1.3.9.1.1.2
Syntax: OCTET STRING
Access: read-only
Status: current
- Displays the common name of the certificate as
described in the x509 subject field.
danDevBsCertificateServiceflag
Object ID: 1.3.1.4.1.32584.1.3.9.1.1.7
Syntax: INTEGER
Access: read-only
Status: current
- Displays the service flag of the certificate. This
signifies which services the certificate will be
associated to. The expected value for this object are:
1 - HTTPS
2 - AAA
3 - HTTPS + AAA
danDevBsCertificateTable
Object ID: 1.3.1.4.1.32584.1.3.9.1
Syntax: Sequence of Type (Array)
- DanDevBsCertificateEntry
Access: not-accessible
Status: current
- Certificate Management table. Each entry in the
table refers to one registered certificate.
danDevBsCertificateType
Object ID: 1.3.1.4.1.32584.1.3.9.1.1.6
Syntax: INTEGER
Constraints:- 0: server
- 1: interCA
- 2: rootCA
Access: read-only
Status: current
- Type of certificate like:
Server Certificate,
Intermediate CA Certificate,
Root CA Certificate.
danDevBsCurrentSwVersion
Object ID: 1.3.1.4.1.32584.1.3.1.1
Syntax: OCTET STRING
Access: read-only
Status: current
- This value identifies the version of software currently running in the BS.
After the downloaded software being successfully activated, the BS shall copy wmanDevBsDownloadSwVersion
into wmanDevBsCurrentSwVersion
danDevBsDownloadSwVersion
Object ID: 1.3.1.4.1.32584.1.3.1.3
Syntax: OCTET STRING
Access: read-write
Status: current
- This value identifies the version upgrade script file name
danDevBsHttpsPortNumber
Object ID: 1.3.1.4.1.32584.1.1.2.17
Syntax: INTEGER
Access: read-only
Status: current
- This R/W determines the port number to be used by the HTTPS application. Default HTTPS port is 443.
danDevBsInactiveSwVersion
Object ID: 1.3.1.4.1.32584.1.3.1.2
Syntax: OCTET STRING
Access: read-only
Status: current
- This value identifies the version of inactive software.
When rollback command is activated the BS shall activate this version.
danDevBsSWUpgradeCommand
Object ID: 1.3.1.4.1.32584.1.3.1.7
Syntax: INTEGER
Constraints:- 0: noAction
- 1: reset
- 2: upgrade
- 3: rollBack
Access: read-write
Status: current
- Setting this value to 'upgrade' causes the BS to initiate
the software download from a server (e.g. software image
server) based on the setting of:
- danDevBsDownloadSwVersion
- danDevBsSoftwareLocation
The status and progress precentage are provided by:
- danDevBsSoftwareUpgradeAdminStatus (ready, downloading, installing, error)
- danDevBsSoftwareProgress
Setting this value to 'reset' will restart the BS with the current SW version as indicated by danDevBsCurrentSwVersion.
Setting this value to 'rollback' will restart the BS running the Inactive SW version as indicated by danDevBsInactiveSwVersion.
danDevBsSoftwareLocation
Object ID: 1.3.1.4.1.32584.1.3.1.4
Syntax: OCTET STRING
Access: read-write
Status: current
- Holds the URL (protocol, IP address, location) where configuration file is to be downloaded from.
E.g. (tftp://192.168.1.1/AP/).
danDevBsSoftwareProgress
Object ID: 1.3.1.4.1.32584.1.3.1.5
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Indicate the progress status in precentage
danDevBsSoftwareUpgradeAdminStatus
Object ID: 1.3.1.4.1.32584.1.3.1.6
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Reading this object returns
the last operation. The download and activation procedure
is vendor specific which will not be defined in this
standard.
danDevInfoFrameUtilAvgDlUnusedSlots
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.31
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Average unsued DL slots per frame during the
danDevInfoFrameUtilInterval frames duration.
danDevInfoFrameUtilAvgUlUnusedSlots
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.32
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Average unsued UL slots per frame during the
danDevInfoFrameUtilInterval farmes duration.
danDevInfoFrameUtilCollection
Object ID: 1.3.1.4.1.32584.1.3.4.7
Syntax: INTEGER
Constraints:- 1: startCollection
- 2: stopCollection
Access: read-write
Status: current
- Start and Stop operation for the Frame Utilization
feature that is based on the Number of Frames and
Repetition rate.
danDevInfoFrameUtilDLSlotsUsed
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.3
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Number of DL slots used in the
danDevInfoMeasureSlotsCmd frames not including
MAP and FCH
danDevInfoFrameUtilDl16QAM12
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.16
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Percentage of DL slots modulated with 16QAM 1/2
using MIMO-A diversity
danDevInfoFrameUtilDl16QAM34
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.15
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Percentage of DL slots modulated with 16QAM 3/4
using MIMO-A diversity
danDevInfoFrameUtilDl64QAM12
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.14
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Percentage of DL slots modulated with 64QAM 1/2
using MIMO-A diversity
danDevInfoFrameUtilDl64QAM23
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.13
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Percentage of DL slots modulated with 64QAM 2/3
using MIMO-A diversity
danDevInfoFrameUtilDl64QAM34
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.12
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Percentage of DL slots modulated with 64QAM 3/4
using MIMO-A diversity
danDevInfoFrameUtilDl64QAM56
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.11
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Percentage of DL slots modulated with 64QAM 5/6
using MIMO-A diversity
danDevInfoFrameUtilDl64QAM56MimoB
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.10
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Percentage of DL slots modulated with 64QAM 5/6
using MIMO-B diversity
danDevInfoFrameUtilDlAvgMCS
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.29
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Average DL MCS (modulation and coding scheme)
(in bits/slot units) utilized during the
danDevInfoFrameUtilInterval frames duration.
danDevInfoFrameUtilDlQPSK12
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.18
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Percentage of DL slots modulated with QPSK 1/2 using MIMO-A diversity.
danDevInfoFrameUtilDlQPSK34
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.17
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Percentage of DL slots modulated with QPSK 3/4
using MIMO-A diversity.
danDevInfoFrameUtilDlThroughput
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.27
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Over the air DL throughput in bps during the
danDevInfoFrameUtilInterval frames duration.
danDevInfoFrameUtilEntry
Object ID: 1.3.1.4.1.32584.1.3.4.6.1
Syntax: Sequence (Structure)
- danDevInfoFrameUtilSysTime
- danDevInfoFrameUtilTotalDLSlots
- danDevInfoFrameUtilDLSlotsUsed
- danDevInfoFrameUtilPercDLSlotsUsed
- danDevInfoFrameUtilTotalULSlots
- danDevInfoFrameUtilULSlotsUsed
- danDevInfoFrameUtilPercULSlotsUsed
- danDevInfoFrameUtilMapSlotsUsed
- danDevInfoFrameUtilMapFull
- danDevInfoFrameUtilDl64QAM56MimoB
- danDevInfoFrameUtilDl64QAM56
- danDevInfoFrameUtilDl64QAM34
- danDevInfoFrameUtilDl64QAM23
- danDevInfoFrameUtilDl64QAM12
- danDevInfoFrameUtilDl16QAM34
- danDevInfoFrameUtilDl16QAM12
- danDevInfoFrameUtilDlQPSK34
- danDevInfoFrameUtilDlQPSK12
- danDevInfoFrameUtilUl64QAM56
- danDevInfoFrameUtilUl64QAM34
- danDevInfoFrameUtilUl64QAM23
- danDevInfoFrameUtilUl64QAM12
- danDevInfoFrameUtilUl16QAM34
- danDevInfoFrameUtilUl16QAM12
- danDevInfoFrameUtilUlQPSK34
- danDevInfoFrameUtilUlQPSK12
- danDevInfoFrameUtilDlThroughput
- danDevInfoFrameUtilUlThroughput
- danDevInfoFrameUtilDlAvgMCS
- danDevInfoFrameUtilUlAvgMCS
- danDevInfoFrameUtilAvgDlUnusedSlots
- danDevInfoFrameUtilAvgUlUnusedSlots
Access: not-accessible
Status: current
- Frame Utilization Table Entry.
danDevInfoFrameUtilMapFull
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.9
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Number of frames (out of danDevInfoMeasureSlotsCmd
frames) scheduling stopped because MAP was full
danDevInfoFrameUtilMapSlotsUsed
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.8
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Percentage of MAP slots used in the
danDevInfoMeasureSlotsCmd frames.
danDevInfoFrameUtilPercDLSlotsUsed
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.4
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Percenetage of DL slots used in the
danDevInfoMeasureSlotsCmd frames not including
MAP and FCH
danDevInfoFrameUtilPercULSlotsUsed
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.7
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Percentage of UL slots used in the
danDevInfoMeasureSlotsCmd frames not including
UL control slots
danDevInfoFrameUtilRepetitionRate
Object ID: 1.3.1.4.1.32584.1.3.4.8
Syntax: INTEGER
Constraints: 5..60
Access: read-write
Status: current
- Frame utilization data collection repetition interval
in seconds (range 5 - 60). This field identifies the
time between 2 consecutive executions of the frame
utilization data collection.
danDevInfoFrameUtilSysTime
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.1
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- The time in GMT at which the data was collected.
danDevInfoFrameUtilTable
Object ID: 1.3.1.4.1.32584.1.3.4.6
Syntax: Sequence of Type (Array)
- DanDevInfoFrameUtilEntry
Access: not-accessible
Status: current
- Frame Utilization Table
danDevInfoFrameUtilTotalDLSlots
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.2
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Total number of DL slots in the
danDevInfoMeasureSlotsCmd frames not including
MAP and FCH
danDevInfoFrameUtilTotalULSlots
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.5
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Total number of UL slots in the
danDevInfoMeasureSlotsCmd frames not including
UL control slots
danDevInfoFrameUtilULSlotsUsed
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.6
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Number of UL slots used in the
danDevInfoMeasureSlotsCmd frames not including
UL control slots
danDevInfoFrameUtilUl16QAM12
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.24
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Percentage of UL slots modulated with 16QAM 1/2.
danDevInfoFrameUtilUl16QAM34
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.23
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Percentage of UL slots modulated with 16QAM 3/4.
danDevInfoFrameUtilUl64QAM12
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.22
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Percentage of UL slots modulated with 64QAM 1/2.
danDevInfoFrameUtilUl64QAM23
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.21
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Percentage of UL slots modulated with 64QAM 2/3.
danDevInfoFrameUtilUl64QAM34
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.20
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Percentage of UL slots modulated with 64QAM 3/4.
danDevInfoFrameUtilUl64QAM56
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.19
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Percentage of UL slots modulated with 64QAM 5/6.
danDevInfoFrameUtilUlAvgMCS
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.30
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Average UL MCS (modulation and coding scheme)
(in bits/slot units) utilized during the
danDevInfoFrameUtilInterval frames duration.
danDevInfoFrameUtilUlQPSK12
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.26
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Percentage of UL slots modulated with QPSK 1/2.
danDevInfoFrameUtilUlQPSK34
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.25
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Percentage of UL slots modulated with QPSK 3/4.
danDevInfoFrameUtilUlThroughput
Object ID: 1.3.1.4.1.32584.1.3.4.6.1.28
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Over the air UL throughput in bps during the
danDevInfoFrameUtilInterval frames duration.
danDevInfoMeasureMapFull
Object ID: 1.3.1.4.1.32584.1.3.4.3
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Returns map usage
danDevInfoMeasureMapUsage
Object ID: 1.3.1.4.1.32584.1.3.4.2
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Returns number of times that map was full
danDevInfoMeasureSlotsCmd
Object ID: 1.3.1.4.1.32584.1.3.4.1
Syntax: INTEGER
Constraints: 5..1000
Access: read-write
Status: current
- Starts the slots measurments. Parameter is number of frames to measure.
danDevInfoMeasureSlotsDataAggrSlots
Object ID: 1.3.1.4.1.32584.1.3.4.4.1.4
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Returns aggregated slots number used for the zone
danDevInfoMeasureSlotsDataDir
Object ID: 1.3.1.4.1.32584.1.3.4.4.1.2
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Returns zone direction : 0 - downlink , 1 - uplink
danDevInfoMeasureSlotsDataEntry
Object ID: 1.3.1.4.1.32584.1.3.4.4.1
Syntax: Sequence (Structure)
- danDevInfoMeasureSlotsDataIdx
- danDevInfoMeasureSlotsDataDir
- danDevInfoMeasureSlotsDataZoneSize
- danDevInfoMeasureSlotsDataAggrSlots
- danDevInfoMeasureSlotsDataPercentage
Access: not-accessible
Status: current
- Description.
danDevInfoMeasureSlotsDataIdx
Object ID: 1.3.1.4.1.32584.1.3.4.4.1.1
Syntax: INTEGER
Constraints: 1..4
Access: read-only
Status: current
- Table index
danDevInfoMeasureSlotsDataPercentage
Object ID: 1.3.1.4.1.32584.1.3.4.4.1.5
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Returns average zone usage
danDevInfoMeasureSlotsDataTable
Object ID: 1.3.1.4.1.32584.1.3.4.4
Syntax: Sequence of Type (Array)
- DanDevInfoMeasureSlotsDataEntry
Access: not-accessible
Status: current
- Description.
danDevInfoMeasureSlotsDataZoneSize
Object ID: 1.3.1.4.1.32584.1.3.4.4.1.3
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Returns zone size in slots
danDevInfoMeasureSlotsNumCnt
Object ID: 1.3.1.4.1.32584.1.3.4.5.1.3
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Slots number actually used for provided rate and direction
danDevInfoMeasureSlotsNumDir
Object ID: 1.3.1.4.1.32584.1.3.4.5.1.2
Syntax: INTEGER
Constraints:- 0: downLink
- 1: upLink
- 2: downLinkMimo
Access: read-only
Status: current
- Returns zone direction : 0 - downlink , 1 - uplink
danDevInfoMeasureSlotsNumEntry
Object ID: 1.3.1.4.1.32584.1.3.4.5.1
Syntax: Sequence (Structure)
- danDevInfoMeasureSlotsNumRate
- danDevInfoMeasureSlotsNumDir
- danDevInfoMeasureSlotsNumCnt
Access: not-accessible
Status: current
- Description.
danDevInfoMeasureSlotsNumRate
Object ID: 1.3.1.4.1.32584.1.3.4.5.1.1
Syntax: INTEGER
Constraints:- 10: quam64_5_6
- 3: qpsk1_2
- 4: qpsk3_4
- 5: quam16_1_2
- 6: quam16_3_4
- 7: quam64_1_2
- 8: quam64_2_3
- 9: quam64_3_4
Access: read-only
Status: current
- Table index - rate
FM_e_qpsk_1_2 =3,
FM_e_qpsk_3_4 = 4,
FM_e_quam16_1_2=5,
FM_e_quam16_3_4=6,
FM_e_quam64_1_2=7,
FM_e_quam64_2_3=8,
FM_e_quam64_3_4=9,
FM_e_quam64_5_6=10,
danDevInfoMeasureSlotsNumTable
Object ID: 1.3.1.4.1.32584.1.3.4.5
Syntax: Sequence of Type (Array)
- DanDevInfoMeasureSlotsNumEntry
Access: not-accessible
Status: current
- Description.
danDlAccNumSymbols
Object ID: 1.3.1.4.1.32584.1.2.2.1.5
Syntax: INTEGER
Constraints: 0..35
Access: read-only
Status: current
- Size of Access DL sub frame in symbols
danEcinrBackoffValue
Object ID: 1.3.1.4.1.32584.1.2.4.2.2
Syntax: INTEGER
Constraints: -3..3
Access: read-write
Status: current
- The backoff value in unit of msc used by the DL rate Adpatation based on Effective CINR
danEnforceAuth
Object ID: 1.3.1.4.1.32584.1.6.6
Syntax: INTEGER
Constraints:- 0: false
- 1: true
Access: read-write
Status: current
- When set to TRUE force Authentication in Stand-Alone according to Authorized CPE list
danEthRxBroadcastPackets
Object ID: 1.3.1.4.1.32584.1.8.13.7
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of broadcast packets received.
danEthRxClsDestIp
Object ID: 1.3.1.4.1.32584.1.8.13.19
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of received packets, classified by destination IP.
danEthRxClsDestMac
Object ID: 1.3.1.4.1.32584.1.8.13.24
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of received packets, classified by destination MAC.
danEthRxClsGreKey
Object ID: 1.3.1.4.1.32584.1.8.13.30
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of received packets, classified by GRE Key.
danEthRxClsSrcIp
Object ID: 1.3.1.4.1.32584.1.8.13.20
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of received packets, classified by source IP.
danEthRxClsSrcMac
Object ID: 1.3.1.4.1.32584.1.8.13.25
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of received packets, classified by source MAC.
danEthRxClsTcpDestPort
Object ID: 1.3.1.4.1.32584.1.8.13.28
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of received packets, classified by destination TCP port.
danEthRxClsTcpSrcPort
Object ID: 1.3.1.4.1.32584.1.8.13.29
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of received packets, classified by source TCP port.
danEthRxClsTos
Object ID: 1.3.1.4.1.32584.1.8.13.21
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of received packets, classified by TOS.
danEthRxClsUdpDestPort
Object ID: 1.3.1.4.1.32584.1.8.13.26
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of received packets, classified by destination UDP port.
danEthRxClsUdpSrcPort
Object ID: 1.3.1.4.1.32584.1.8.13.27
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of received packets, classified by source UDP port.
danEthRxClsUnclassified
Object ID: 1.3.1.4.1.32584.1.8.13.18
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of received packets, unclassified
danEthRxClsVlanId
Object ID: 1.3.1.4.1.32584.1.8.13.22
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of received packets, classified by VLAN Id.
danEthRxClsVlanPriority
Object ID: 1.3.1.4.1.32584.1.8.13.23
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of received packets, classified by VLAN Priority.
danEthRxDroppedPackets
Object ID: 1.3.1.4.1.32584.1.8.13.9
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of received packets dropped.
danEthRxIpPacketsNonVlan
Object ID: 1.3.1.4.1.32584.1.8.13.11
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of received IP packets, without VLAN tag.
danEthRxIpPacketsNonVlanDropped
Object ID: 1.3.1.4.1.32584.1.8.13.15
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of received IP packets, without VLAN tag, dropped.
danEthRxIpPacketsVlan
Object ID: 1.3.1.4.1.32584.1.8.13.10
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of received IP packets, with VLAN tag.
danEthRxIpPacketsVlanDropped
Object ID: 1.3.1.4.1.32584.1.8.13.14
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of received IP packets, with VLAN tag, dropped.
danEthRxNonIpPacketsNonVlan
Object ID: 1.3.1.4.1.32584.1.8.13.13
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of received Non-IP packets, without VLAN tag.
danEthRxNonIpPacketsNonVlanDropped
Object ID: 1.3.1.4.1.32584.1.8.13.17
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of received Non-IP packets, without VLAN tag, dropped
danEthRxNonIpPacketsVlan
Object ID: 1.3.1.4.1.32584.1.8.13.12
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of received Non-IP packets, with VLAN tag.
danEthRxNonIpPacketsVlanDropped
Object ID: 1.3.1.4.1.32584.1.8.13.16
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of received Non-IP packets, with VLAN tag, dropped
danEthRxPacketErrors
Object ID: 1.3.1.4.1.32584.1.8.13.8
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of packets received with errors.
danEthRxTotalBytes
Object ID: 1.3.1.4.1.32584.1.8.13.5
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of bytes received.
danEthRxTotalPackets
Object ID: 1.3.1.4.1.32584.1.8.13.6
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of packets received.
danEthTxDroppedPackets
Object ID: 1.3.1.4.1.32584.1.8.13.4
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of packets dropped.
danEthTxPacketErrors
Object ID: 1.3.1.4.1.32584.1.8.13.3
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total number of error packets.
danEthTxTotalBytes
Object ID: 1.3.1.4.1.32584.1.8.13.1
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total bytes transmitted.
danEthTxTotalPackets
Object ID: 1.3.1.4.1.32584.1.8.13.2
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Total packets transmitted.
danEthernetDSTMACaddress
Object ID: 1.3.1.4.1.32584.1.1.2.3
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-only
Status: current
- Default Ethernet destination MAC address when no ARP resolution.
danEventLogGenericEntryLimit
Object ID: 1.3.1.4.1.32584.1.4.1.1.2.1
Syntax: INTEGER
Constraints: 10..50
Access: read-only
Status: current
- The maximum number of event entries that may be held in wmanDevCmnEventLogTable.
If an application changes the limit while there are events in the log, the oldest events must be discarded
to bring the log down to the new limit.
danExtendedRangeEnabled
Object ID: 1.3.1.4.1.32584.1.1.7.8
Syntax: INTEGER
Constraints:- 0: disable
- 1: enable
Access: read-write
Status: current
- Allows the user to select extended ranging mode
- False: Disabled(0) extended range mode disabled
- True: Enabled(1) extended range mode enabled
Default is false.
danFmBandwidth
Object ID: 1.3.1.4.1.32584.1.2.2.1.1
Syntax: INTEGER
Constraints:- 0: bw35MHz
- 1: bw5MHz
- 2: bw7MHz
- 3: bw875MHz
- 4: bw10MHz
Access: read-only
Status: current
- The OID maintains the actual BW the AP is currently configured to.
Supported bandwidth: 3.5MHz, 5MHz, 7MHz, 10MHz
danFmDlNumSymbols
Object ID: 1.3.1.4.1.32584.1.2.2.1.3
Syntax: INTEGER
Constraints: 0..35
Access: read-only
Status: current
- DL sub frame size number of symols
danFmMapType
Object ID: 1.3.1.4.1.32584.1.2.2.1.2
Syntax: INTEGER
Constraints:- 0: regularMap
- 1: compressedMap
Access: read-only
Status: current
- Set MAP Type to Regular MAP or Compressed MAP
danFmNumZones
Object ID: 1.3.1.4.1.32584.1.2.2.3.1
Syntax: INTEGER
Constraints: 1..14
Access: read-only
Status: current
- total number of zones in the frame
danFmUlNumSymbols
Object ID: 1.3.1.4.1.32584.1.2.2.1.4
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- UL sub frame size number of symols
danFmZoneAgcProfile
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.15
Syntax: INTEGER
Constraints: 0..9
Access: read-only
Status: current
- AGC profile setting
danFmZoneAntMethod
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.7
Syntax: INTEGER
Constraints: 0..2
Access: read-only
Status: current
- Zone SISO STC Matrix A, Matrix B
danFmZoneFirstUlTxZone
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.13
Syntax: INTEGER
Constraints: 0..127
Access: read-only
Status: current
- First Ul Tx Zone
danFmZoneIncPreamble
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.12
Syntax: INTEGER
Constraints: 0..1
Access: read-only
Status: current
- Used for test
danFmZoneIndex
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.1
Syntax: INTEGER
Constraints: 0..13
Access: read-only
Status: current
- Indicate a specific zone
danFmZonePermBase
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.10
Syntax: INTEGER
Constraints: 0..127
Access: read-only
Status: current
- the permbase for this zone. 0..31 DL / 0..127 UL.
danFmZonePermSchem
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.6
Syntax: INTEGER
Constraints: 0..3
Access: read-only
Status: current
- perm scheme
danFmZonePrbsId
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.8
Syntax: INTEGER
Constraints: 0..2
Access: read-only
Status: current
- Zone PRBS ID
danFmZoneSymbols
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.3
Syntax: INTEGER
Constraints: 0..35
Access: read-only
Status: current
- Zone length in symbols
danFmZoneTAD
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.5
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- time_advance_distance
danFmZoneTG
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.4
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Transmit Recieve Transition Gap in microseconds
danFmZoneType
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.2
Syntax: INTEGER
Constraints:- 0: zoneDlAcc
- 1: zoneUlAcc
- 2: zoneDlBH
- 3: zoneUlBH
Access: read-only
Status: current
- Zone type: zone_dl_acc, zone_ul_acc, zone_dl_bh, zone_ul_bh
danFmZoneUseDedicatePilots
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.14
Syntax: INTEGER
Constraints: 0..1
Access: read-only
Status: current
- support for dedicated pilots in DL. Should be related to segment planning.
danFmZoneUsePrbsId
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.9
Syntax: INTEGER
Constraints: 0..1
Access: read-only
Status: current
- Zone Use PRBS ID in the permutation
danFmZoneWkReset
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1.11
Syntax: INTEGER
Constraints: 0..1
Access: read-only
Status: current
- used for test
danFmZonesEntry
Object ID: 1.3.1.4.1.32584.1.2.2.3.2.1
Syntax: Sequence (Structure)
- danFmZoneIndex
- danFmZoneType
- danFmZoneSymbols
- danFmZoneTG
- danFmZoneTAD
- danFmZonePermSchem
- danFmZoneAntMethod
- danFmZonePrbsId
- danFmZoneUsePrbsId
- danFmZonePermBase
- danFmZoneWkReset
- danFmZoneIncPreamble
- danFmZoneFirstUlTxZone
- danFmZoneUseDedicatePilots
- danFmZoneAgcProfile
Access: not-accessible
Status: current
- Each entry refer to a specific zone
danFmZonesTable
Object ID: 1.3.1.4.1.32584.1.2.2.3.2
Syntax: Sequence of Type (Array)
- DanFmZonesEntry
Access: not-accessible
Status: current
- Table maintain parameters of zones, number of supported zones provided by 'danFmNumZones'
size of table is fixed.
danFrequencyRangeType
Object ID: 1.3.1.4.1.32584.1.2.6.1
Syntax: INTEGER
Constraints:- 0: range33_38
- 1: range36_38
- 2: range33_36
- 255: rangeOther
Access: read-only
Status: current
- This oid provide information about the frequency range supported by the device HW.
Following ranges information are provided:
- range3_5: Board Central Frequency range is 3.5 GHz
- range3_65: Board Central Frequency range is 3.65 GHz
- rangeOther: Other board types
danFrequencyRestrictionModeReadOnly
Object ID: 1.3.1.4.1.32584.1.2.6.2
Syntax: INTEGER
Constraints:- 0: restNoRestriction
- 1: restRestrictionCode1
Access: read-only
Status: current
- The OID specify the restriction mode.
restNoRestriction: No restriction for frequency settings
restRestrictionCode1: Frequency setting is restricted to the range 3.4-3.6GHz
danFwdDlNoneAssociated
Object ID: 1.3.1.4.1.32584.1.9.2
Syntax: INTEGER
Constraints:- 0: false
- 1: true
Access: read-write
Status: current
- Boolean.
Defines the required handling for DL unicast non-associated packets:
- False: do not forward packets if their destination Mac address
is not associated with any SM.
- True: forward packets to the group/common MCC if their destination Mac
address is not associated with any SM.
Default is false.
Note: UL unicast non-associated packets are always forwarded only to the Ethernet
danFwdUlBroadcastAir
Object ID: 1.3.1.4.1.32584.1.9.3
Syntax: INTEGER
Constraints:- 0: false
- 1: true
Access: read-write
Status: current
- Boolean. UL broadcast either flood or pass to Ethernet only.
- False: Do not forward UL broadcast packets to the air interface. Note: UL broadcast packets are still forwarded to the Ethernet.
- True: forward packets to the air interface and Ethernet (flood).
Default is True
Notes:
1. UL broadcast packets are always forwarded to the Ethernet interface
2. DL broadcast packets are always forwarded to the air interface
danGPSHeight
Object ID: 1.3.1.4.1.32584.1.1.1.12.7
Syntax: OCTET STRING
Access: read-only
Status: current
- Display Height as received from the GPS in a 00.0 meters format.
danGPSLatitude
Object ID: 1.3.1.4.1.32584.1.1.1.12.5
Syntax: OCTET STRING
Access: read-only
Status: current
- Display Latitude as received from the GPS in a
ddmm.mmmm N/S format. If no Latitude is
received, then display 0000.0000 N
danGPSLongitude
Object ID: 1.3.1.4.1.32584.1.1.1.12.6
Syntax: OCTET STRING
Access: read-only
Status: current
- Display Longitude as received from the GPS in a
ddmm.mmmm E/W format. If no Longitude is
received, then display 0000.0000 E
danGPSSpeed
Object ID: 1.3.1.4.1.32584.1.1.1.12.8
Syntax: OCTET STRING
Access: read-only
Status: current
- Display Speed as received from the GPS in a 00.0 km/hr format.
danGPSTime
Object ID: 1.3.1.4.1.32584.1.1.1.12.4
Syntax: OCTET STRING
Constraints: SIZE (8)
Access: read-only
Status: current
- Diplay UTC time in HH:MM:SS format if received
from the GPS, else display No Time
danGenericAlarmDescription
Object ID: 1.3.1.4.1.32584.1.4.1.2.1.1.6
Syntax: OCTET STRING
Access: read-only
Status: current
- Description of the Alarm (for display purpose)
danGenericAlarmId
Object ID: 1.3.1.4.1.32584.1.4.1.2.1.1.2
Syntax: INTEGER
Constraints:- 0: alarmNA
- 1: alarmRssiHigh
- 2: alarmRssiLow
- 3: alarmPerOverThr
- 4: alarmPkmError
- 5: alarmDhcpLost
- 6: alarmSyncLost
- 7: alarmChannelSelected
Access: read-only
Status: current
- Alarm unique Id
danGenericAlarmName
Object ID: 1.3.1.4.1.32584.1.4.1.2.1.1.5
Syntax: OCTET STRING
Access: read-only
Status: current
- Alarm specific name
danGenericAlarmSevirity
Object ID: 1.3.1.4.1.32584.1.4.1.2.1.1.7
Syntax: INTEGER
Constraints:- 1: alarmSevirityHigh
- 2: alarmSevirityMedium
- 3: alarmSevirityLow
Access: read-only
Status: current
- The assigned sevirity of the Alarm (Mainly for display purpose)
danGenericAlarmUpdateTime
Object ID: 1.3.1.4.1.32584.1.4.1.2.1.1.3
Syntax: INTEGER
Constraints: 0..4294967295
Access: read-only
Status: current
- Alarm last change time
danGenericEventAlarmAction
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.1.1.10
Syntax: INTEGER
Constraints:- 0: off
- 1: on
- 2: na
Access: read-only
Status: current
- According to AlarmId (i.e. if event is assosiated with alarm) then the values for this event are: AlarmOn, AlarmOff, N/A.
danGenericEventAlarmId
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.1.1.9
Syntax: INTEGER
Constraints:- 0: alarmNA
- 1: alarmRssiHigh
- 2: alarmRssiLow
- 3: alarmPerOverThr
- 4: alarmPkmError
- 5: alarmDhcpLost
- 6: alarmSyncLost
- 7: alarmChannelSelected
Access: read-only
Status: current
- The related alarmId attached to this event or N/A
danGenericEventControlEntry
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.1.1
Syntax: Sequence (Structure)
- danGenericEventId
- danGenericEventName
- danGenericEventDescription
- danGenericEventSevirity
- danGenericEventPollPeriod
- danGenericEventDirection
- danGenericEventThreshold
- danGenericEventTrapEnabled
- danGenericEventAlarmId
- danGenericEventAlarmAction
Access: not-accessible
Status: current
- Table defines all possible events, with controlable attribute per event. Table size is fixed and reflect
the event supported by the SW.
danGenericEventControlTable
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.1
Syntax: Sequence of Type (Array)
- DanGenericEventControlEntry
Access: not-accessible
Status: current
- Table defines all possible events, with controlable attribute per event. Table size is fixed and reflect
the event supported by the SW.
danGenericEventDescription
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.1.1.3
Syntax: OCTET STRING
Access: read-only
Status: current
- Event Readable description
danGenericEventDirection
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.1.1.6
Syntax: INTEGER
Constraints:- 1: up
- 2: down
- 3: different
Access: read-only
Status: current
- Measurement vs threshold:
- if up event is generated in Value >= Threshold
- if down event is generated in val <= threshold
- if diff generate if different from previous value
danGenericEventId
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.1.1.1
Syntax: INTEGER
Constraints:- 1: rssiLowOn
- 10: ssDynamicServiceFail
- 12: sfEvent
- 13: bsStartup
- 14: dhcpLostOn
- 15: dhcpLostOff
- 16: syncLost
- 17: syncRestored
- 18: channelSelected
- 19: interferenceDetected
- 2: rssiLowOff
- 3: rssiHighOn
- 4: rssiHighOff
- 5: perOn
- 6: perOff
- 7: ssStatus
- 8: ssPKMErr
Access: read-only
Status: current
- Unique Event ID
danGenericEventName
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.1.1.2
Syntax: OCTET STRING
Access: read-only
Status: current
- Event Readable name
danGenericEventPollPeriod
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.1.1.5
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- Polling period for the specific event type.
If 0 then the polling is disabled and event should be updated externally.
danGenericEventSevirity
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.1.1.4
Syntax: INTEGER
Constraints:- 0: na
- 1: low
- 2: medium
- 3: high
Access: read-only
Status: current
- Event assigned sevirity
danGenericEventThreshold
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.1.1.7
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-write
Status: current
- Event threshold (must be number)
danGenericEventTrapEnabled
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.1.1.8
Syntax: INTEGER
Constraints:- 0: false
- 1: true
Access: read-write
Status: current
- If true generate Trap when event is logged into the LogGenericEventTable
danHandRngCode
Object ID: 1.3.1.4.1.32584.1.2.7.3
Syntax: INTEGER
Constraints: 0..255
Access: read-write
Status: current
- Number of Handover ranging codes. Possible values are from 0 to
255.
danHarqStatsAcks
Object ID: 1.3.1.4.1.32584.1.8.11.1.8
Syntax: INTEGER
Constraints: 0..65535
Access: read-only
Status: current
- Number of ACK's.
danHarqStatsCid
Object ID: 1.3.1.4.1.32584.1.8.11.1.3
Syntax: INTEGER
Constraints: 0..1600
Access: read-only
Status: current
- MSS Connection Id.
danHarqStatsDirection
Object ID: 1.3.1.4.1.32584.1.8.11.1.5
Syntax: INTEGER
Constraints:- 0: downlink
- 1: uplink
Access: read-only
Status: current
- Direction of Service Flow.
danHarqStatsDiscards
Object ID: 1.3.1.4.1.32584.1.8.11.1.10
Syntax: INTEGER
Constraints: 0..65535
Access: read-only
Status: current
- Description.
danHarqStatsEntry
Object ID: 1.3.1.4.1.32584.1.8.11.1
Syntax: Sequence (Structure)
- danHarqStatsMacAddr
- danHarqStatsSfId
- danHarqStatsCid
- danHarqStatsMssId
- danHarqStatsDirection
- danHarqStatsNumAcids
- danHarqStatsNumRetries
- danHarqStatsAcks
- danHarqStatsNacks
- danHarqStatsDiscards
- danHarqStatsNoLlrs
Access: not-accessible
Status: current
- Each entry represent MSS and its Service Flow.
danHarqStatsMacAddr
Object ID: 1.3.1.4.1.32584.1.8.11.1.1
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-only
Status: current
- MSS MAC address.
danHarqStatsMssId
Object ID: 1.3.1.4.1.32584.1.8.11.1.4
Syntax: INTEGER
Constraints: 0..1600
Access: read-only
Status: current
- MSS ID.
danHarqStatsNacks
Object ID: 1.3.1.4.1.32584.1.8.11.1.9
Syntax: INTEGER
Constraints: 0..65535
Access: read-only
Status: current
- Number of NACK's.
danHarqStatsNoLlrs
Object ID: 1.3.1.4.1.32584.1.8.11.1.11
Syntax: INTEGER
Constraints: 0..65535
Access: read-only
Status: current
- Number of no LLR's.
danHarqStatsNumAcids
Object ID: 1.3.1.4.1.32584.1.8.11.1.6
Syntax: INTEGER
Constraints: 0..255
Access: read-only
Status: current
- Number of ACIDS.
danHarqStatsNumRetries
Object ID: 1.3.1.4.1.32584.1.8.11.1.7
Syntax: INTEGER
Constraints: 0..255
Access: read-only
Status: current
- Number of Retries.
danHarqStatsSfId
Object ID: 1.3.1.4.1.32584.1.8.11.1.2
Syntax: INTEGER
Constraints: 1..1600
Access: read-only
Status: current
- Serice Flow Id.
danHarqStatsTable
Object ID: 1.3.1.4.1.32584.1.8.11
Syntax: Sequence of Type (Array)
- DanHarqStatsEntry
Access: not-accessible
Status: current
- HARQ Statistics table.
danHostName
Object ID: 1.3.1.4.1.32584.1.1.2.14
Syntax: OCTET STRING
Access: read-write
Status: current
- Determines hostname
danIf2fBsQoSFixedVsVariableSduInd
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.9
Syntax: INTEGER
Constraints:- 0: variableLength
- 1: fixedLength
Access: read-create
Status: current
- The value of this parameter specifies whether the SDUs on
the service flow are variable-length (0) or fixed-length
(1). The parameter is used only if packing is on for the
service flow. The default value is 0, i.e.,variable-length
SDUs.
If the parameter is omitted, 0 is assumed.
danIf2fBsQoSMaxLatency
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.8
Syntax: Gauge
Constraints: 0..4294967295
Access: read-create
Status: current
- The value of this parameter specifies the maximum latency
between the reception of a packet by the BS or SS on its
network interface and the forwarding of the packet to its
RF Interface.
danIf2fBsQoSMaxSustainedRate
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.4
Syntax: Gauge
Constraints: 0..4294967295
Access: read-create
Status: current
- This parameter defines the peak information rate of the
service. The rate is expressed in bits per second and
pertains to the SDUs at the input to the system.
danIf2fBsQoSMaxTrafficBurst
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.5
Syntax: Gauge
Constraints: 0..4294967295
Access: read-create
Status: current
- This parameter defines the maximum burst size that must be
accommodated for the service.
If the parameter is omitted, 0 is assumed.
danIf2fBsQoSMinReservedRate
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.6
Syntax: Gauge
Constraints: 0..4294967295
Access: read-create
Status: current
- This parameter specifies the minimum rate reserved for this
service flow.
danIf2fBsQoSProfileIndex
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.1
Syntax: INTEGER
Constraints: 1..256
Access: read-create
Status: current
- The index value which uniquely identifies an entry in the danIf2fBsQosProfileTable.
danIf2fBsQoSSduSize
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.10
Syntax: Gauge
Constraints: 0..4294967295
Access: read-create
Status: current
- The value of this parameter specifies the length of the
SDU for a fixed-length SDU service flow. This parameter
is used only if packing is on and the service flow is
indicated as carrying fixed-length SDUs. The default
value is 49 bytes, i.e., VC-switched ATM cells with PHS.
The parameter is relevant for both ATM and Packet
Convergence Sublayers.
If the parameter is omitted, 49 is assumed.
danIf2fBsQoSToleratedJitter
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.7
Syntax: Gauge
Constraints: 0..4294967295
Access: read-create
Status: current
- This parameter defines the Maximum delay variation (jitter)
for the connection.
danIf2fBsQoSTrafficPriority
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.3
Syntax: INTEGER
Constraints: 0..7
Access: read-create
Status: current
- The value of this parameter specifies the priority
assigned to a service flow. For uplink service flows,
the BS should use this parameter when determining
precedence in request service and grant generation,
and the SS shall preferentially select contention
Request opportunities for Priority Request CIDs
based on this priority. Higher numbers indicate higher
priority.
If the parameter is omitted, 5 is assumed.
danIf2fBsQosArqAckProcess
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.26
Syntax: INTEGER
Constraints: 0..1275
Access: read-create
Status: current
- This optional parameter indicates the number of ms required by the ARQ receiver to process the received ARQ blocks and provide a valid ACK or NAK
Values are in frames
If the parameter is omitted, 0 is assumed.
danIf2fBsQosArqBlockSize
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.25
Syntax: INTEGER
Constraints: 16..1024
Access: read-create
Status: current
- The size of an ARQ block in bytes
If the parameter is omitted, 128 is assumed.
danIf2fBsQosArqRxRetryTimeout
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.14
Syntax: INTEGER
Constraints: 0..65535
Access: read-create
Status: current
- Indicates receiver delay, including receiving (e.g., MAC
PDUs) and sending (e.g., ARQ feedback) delays and other
implementation-dependent processing delays. If the
receiver is the BS, it may include other delays such as
scheduling and propagation delay.
If the parameter is omitted, in #fr 5 is assumed.
danIf2fBsQosArqTxRetryTimeout
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.13
Syntax: INTEGER
Constraints: 0..65535
Access: read-create
Status: current
- Indicates transmitter delay, including sending (e.g., MAC
PDUs) and receiving (e.g., ARQ feedback) delays and other
implementation dependent processing delays. If the
transmitter is the BS, it may include other delays such as
scheduling and propagation delay.
If the parameter is omitted, in #fr 5 is assumed.
danIf2fBsQosDataDeliveryType
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.21
Syntax: INTEGER
Constraints:- 0: qosDeliveryUGS
- 1: qosDeliveryRtPS
- 2: qosDeliveryNrtPS
- 3: qosDeliveryBE
- 4: qosDeliveryExtRtPS
Access: read-create
Status: current
- Type of downlink Data Delivery Services. Values as in TLV 145/146.29
If the parameter is omitted, BE is assumed.
danIf2fBsQosHarqEnable
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.27
Syntax: INTEGER
Constraints:- 0: false
- 1: true
Access: read-create
Status: current
- Enable HARQ for this SF
If the parameter is omitted, 0 is assumed.
danIf2fBsQosHarqMapLen
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.28
Syntax: INTEGER
Constraints: 0..16
Access: read-create
Status: current
- Num of ACIDs
Values are 0..16
If the parameter is omitted, 4 is assumed.
danIf2fBsQosHarqMaxAcids
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.31
Syntax: INTEGER
Constraints: 1..16
Access: read-create
Status: current
- Max num of ACIDs per frame
Values are 1..16 .
If the parameter is omitted, 1 is assumed.
danIf2fBsQosHarqMaxDlTxCmd
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.32
Syntax: INTEGER
Constraints: 0..10000
Access: read-create
Status: current
- HARQ downlink max allocation per ACID
Values are 0=dont care. 1..100000
If the parameter is omitted, 4096 is assumed.
danIf2fBsQosHarqMaxUlTxCmd
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.33
Syntax: INTEGER
Constraints: 0..4096
Access: read-create
Status: current
- HARQ uplink max allocation per ACID
Values are 0=dont care. 1..100000
If the parameter is omitted, 2048 is assumed.
danIf2fBsQosHarqNumRetries
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.29
Syntax: INTEGER
Constraints: 1..16
Access: read-create
Status: current
- Max num of retransmissions
Values are 0..16 for DL
0..7 for UL
If the parameter is omitted, 1 is assumed.
danIf2fBsQosHarqPduSn
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.30
Syntax: INTEGER
Constraints: 0..2
Access: read-create
Status: current
- PSU sequence number recording scheme.
0 = none, 1=short, 2=long
If the parameter is omitted, 0 is assumed.
danIf2fBsQosProfileDscpMarking
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.36
Syntax: INTEGER
Constraints: 0..63
Access: read-create
Status: current
- DSCP value being set to all packets affected by this profile
danIf2fBsQosProfileDscpMarkingEnable
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.35
Syntax: INTEGER
Constraints:- 0: false
- 1: true
Access: read-create
Status: current
- Enable DSCP marking feature (when disable the DSCP bit remain unchanged)
danIf2fBsQosProfileEntry
Object ID: 1.3.1.4.1.32584.1.7.4.1.1
Syntax: Sequence (Structure)
- danIf2fBsQoSProfileIndex
- danIf2fBsQosServiceClassName
- danIf2fBsQoSTrafficPriority
- danIf2fBsQoSMaxSustainedRate
- danIf2fBsQoSMaxTrafficBurst
- danIf2fBsQoSMinReservedRate
- danIf2fBsQoSToleratedJitter
- danIf2fBsQoSMaxLatency
- danIf2fBsQoSFixedVsVariableSduInd
- danIf2fBsQoSSduSize
- danIf2fBsQosScArqEnable
- danIf2fBsQosScArqWindowSize
- danIf2fBsQosArqTxRetryTimeout
- danIf2fBsQosArqRxRetryTimeout
- danIf2fBsQosScArqBlockLifetime
- danIf2fBsQosScArqSyncLossTimeout
- danIf2fBsQosScArqDeliverInOrder
- danIf2fBsQosScArqRxPurgeTimeout
- danIf2fBsQosReqTxPolicy
- danIf2fBsQosULscheduleType
- danIf2fBsQosDataDeliveryType
- danIf2fBsQosSduInteraval
- danIf2fBsQosUnsolicitedGrantInterval
- danIf2fBsQosUnsolicitedPollInterval
- danIf2fBsQosArqBlockSize
- danIf2fBsQosArqAckProcess
- danIf2fBsQosHarqEnable
- danIf2fBsQosHarqMapLen
- danIf2fBsQosHarqNumRetries
- danIf2fBsQosHarqPduSn
- danIf2fBsQosHarqMaxAcids
- danIf2fBsQosHarqMaxDlTxCmd
- danIf2fBsQosHarqMaxUlTxCmd
- danIf2fBsQosSecurityEnable
- danIf2fBsQosProfileDscpMarkingEnable
- danIf2fBsQosProfileDscpMarking
- danIf2fBsQosServiceClassRowStatus
Access: not-accessible
Status: current
- This table provides one row for each service class
danIf2fBsQosProfileTable
Object ID: 1.3.1.4.1.32584.1.7.4.1
Syntax: Sequence of Type (Array)
- DanIf2fBsQosProfileEntry
Access: not-accessible
Status: current
- Each entry of the table contains corresponding service flow
characteristic attributes (e.g. QoS parameter set). The
value of wmanIf2fBsQoSProfileIndex is obtained from
wmanIf2fBsServiceClassIndex in wmanIf2fBsProvisionedSfTable
danIf2fBsQosReqTxPolicy
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.19
Syntax: BITS
Access: read-create
Status: current
- The value of this parameter provides the capability to
specify certain attributes for the associated service
flow. An attribute is enabled by setting the corresponding
bit position to 1.
VALUES AS IN TLV 145/146.12
if the parameter is omitted, 0x10 is assumed.
danIf2fBsQosScArqBlockLifetime
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.15
Syntax: INTEGER
Constraints: 0..65535
Access: read-create
Status: current
- The maximum time interval an ARQ fragment will be managed
by the transmitter ARQ machine, once initial transmission
of the fragment has occured. If transmission or
retransmission of the fragment is not acknowledged by the
receiver before the time limit is reached, the fragment is
discarded. A value of 0 means Infinite.
If the parameter is omitted, #40 is assumed.
danIf2fBsQosScArqDeliverInOrder
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.17
Syntax: INTEGER
Constraints:- 0: false
- 1: true
Access: read-create
Status: current
- Indicates whether or not data is to be delivered by the
receiving MAC to its client application in the order in
which data was handed off to the originating MAC.
danIf2fBsQosScArqEnable
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.11
Syntax: INTEGER
Constraints:- 0: false
- 1: true
Access: read-create
Status: current
- True(1) ARQ enabling is requested for the connection.
If the parameter is omitted, 0 is assumed.
danIf2fBsQosScArqRxPurgeTimeout
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.18
Syntax: INTEGER
Constraints: 0..65535
Access: read-create
Status: current
- Indicates the time interval the ARQ window is advanced
after a fragment is received. A value of 0 means Infinite.
If the parameter is omitted, in #frame : 32 is assumed
danIf2fBsQosScArqSyncLossTimeout
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.16
Syntax: INTEGER
Constraints: 0..65535
Access: read-create
Status: current
- The maximum interval before declaring a loss of
synchronization of the sender and receiver state machines.
A value of 0 means Infinite.
If the parameter is omitted, in #f : 120 is assumed.
danIf2fBsQosScArqWindowSize
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.12
Syntax: INTEGER
Constraints: 1..1024
Access: read-create
Status: current
- Indicates the maximum number of unacknowledged
fragments at any time.
If the parameter is omitted, 1024 is assumed.
danIf2fBsQosSduInteraval
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.22
Syntax: INTEGER
Constraints: 0..65535
Access: read-create
Status: current
- Nominal interval between consequent SDU arrivals.. Values as in TLV 145/146.30
If the parameter is omitted, 0 is assumed.
danIf2fBsQosSecurityEnable
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.34
Syntax: INTEGER
Constraints:- 0: false
- 1: true
Access: read-create
Status: current
- Enable encryption for this SF.
If the parameter is omitted, 0 is assumed.
danIf2fBsQosServiceClassName
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.2
Syntax: OCTET STRING
Constraints: SIZE (2..18)
Access: read-create
Status: current
- Refers to the Service Class Name
danIf2fBsQosServiceClassRowStatus
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.37
Syntax: INTEGER
Constraints:- 1: active
- 2: n_notInService
- 3: n_notReady
- 4: n_createAndGo
- 5: createAndWait
- 6: destroy
Access: read-create
Status: current
- This object is used to create a new row or modify or delete
an existing row in this table.
If the implementator of this MIB has choosen not to
implement 'dynamic assignment' of profiles, this object is
not useful and should return noSuchName upon SNMP request.
danIf2fBsQosULscheduleType
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.20
Syntax: INTEGER
Constraints:- 0: n_qosUlSchedReserved
- 1: qosUlSchedBSDefined
- 2: qosUlSchedBE
- 3: qosUlSchedNrtPS
- 4: qosUlSchedRtPS
- 5: qosUlSchedExtRtPS
- 6: qosUlSchedUGS
Access: read-create
Status: current
- uplink service type. Values as in TLV 145.11
If the parameter is omitted, BE is assumed.
danIf2fBsQosUnsolicitedGrantInterval
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.23
Syntax: INTEGER
Constraints: 0..65535
Access: read-create
Status: current
- The nominal interval between successive data grant opportunities for this SF
Values are in MS.
If the parameter is omitted, 0 is assumed.
danIf2fBsQosUnsolicitedPollInterval
Object ID: 1.3.1.4.1.32584.1.7.4.1.1.24
Syntax: INTEGER
Constraints: 0..65535
Access: read-create
Status: current
- The maximal nominal interval between successive polling grants
opportunities for this Service Flow.
Values are in MS.
If the parameter is omitted, 0 is assumed.
danIf2fBsRedQoSMaxLatency
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.6
Syntax: Gauge
Constraints: 0..4294967295
Access: read-create
Status: current
- The value of this parameter specifies the maximum latency
between the reception of a packet by the BS or SS on its
network interface and the forwarding of the packet to its
RF Interface.
danIf2fBsRedQoSMaxSustainedRate
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.3
Syntax: Gauge
Constraints: 0..4294967295
Access: read-create
Status: current
- This parameter defines the peak information rate of the
service. The rate is expressed in bits per second and
pertains to the SDUs at the input to the system.
danIf2fBsRedQoSMaxTrafficBurst
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.4
Syntax: Gauge
Constraints: 0..4294967295
Access: read-create
Status: current
- This parameter defines the maximum burst size that must be
accommodated for the service.
If the parameter is omitted, 0 is assumed.
danIf2fBsRedQoSMinReservedRate
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.5
Syntax: Gauge
Constraints: 0..4294967295
Access: read-create
Status: current
- This parameter specifies the minimum rate reserved for this
service flow.
danIf2fBsRedQoSProfileIndex
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.1
Syntax: INTEGER
Constraints: 0..100
Access: read-create
Status: current
- The index value which uniquely identifies an entry in the danIf2fBsRedQosProfileTable.
danIf2fBsRedQosDataDeliveryType
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.7
Syntax: INTEGER
Constraints:- 0: qosDeliveryUGS
- 1: qosDeliveryRtPS
- 2: qosDeliveryNrtPS
- 3: qosDeliveryBE
- 4: qosDeliveryExtRtPS
Access: read-create
Status: current
- Type of downlink Data Delivery Services. Values as in TLV 145/146.29
If the parameter is omitted, BE is assumed.
danIf2fBsRedQosHarqEnable
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.10
Syntax: INTEGER
Constraints:- 0: false
- 1: true
Access: read-create
Status: current
- Enable HARQ for this SF
If the parameter is omitted, 0 is assumed.
danIf2fBsRedQosHarqNumRetries
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.11
Syntax: INTEGER
Constraints: 1..16
Access: read-create
Status: current
- Max num of retransmissions
Values are 0..16 for DL
0..7 for UL
If the parameter is omitted, 1 is assumed.
danIf2fBsRedQosProfileDscpMarking
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.14
Syntax: INTEGER
Constraints: 0..63
Access: read-create
Status: current
- DSCP value being set to all packets affected by this profile
danIf2fBsRedQosProfileDscpMarkingEnable
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.13
Syntax: INTEGER
Constraints:- 0: false
- 1: true
Access: read-create
Status: current
- Enable DSCP marking feature (when disable the DSCP bit remain unchanged)
danIf2fBsRedQosSecurityEnable
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.12
Syntax: INTEGER
Constraints:- 0: false
- 1: true
Access: read-create
Status: current
- Enable encryption for this SF.
If the parameter is omitted, 0 is assumed.
danIf2fBsRedQosServiceClassName
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.2
Syntax: OCTET STRING
Constraints: SIZE (2..18)
Access: read-create
Status: current
- Refers to the Service Class Name
danIf2fBsRedQosServiceClassRowStatus
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.15
Syntax: INTEGER
Constraints:- 1: active
- 2: n_notInService
- 3: n_notReady
- 4: n_createAndGo
- 5: createAndWait
- 6: destroy
Access: read-create
Status: current
- This object is used to create a new row or modify or delete
an existing row in this table.
If the implementator of this MIB has choosen not to
implement 'dynamic assignment' of profiles, this object is
not useful and should return noSuchName upon SNMP request.
danIf2fBsRedQosUnsolicitedGrantInterval
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.8
Syntax: INTEGER
Constraints: 0..65535
Access: read-create
Status: current
- The nominal interval between successive data grant opportunities for this SF
Values are in MS.
If the parameter is omitted, 0 is assumed.
danIf2fBsRedQosUnsolicitedPollInterval
Object ID: 1.3.1.4.1.32584.1.7.4.7.1.9
Syntax: INTEGER
Constraints: 0..65535
Access: read-create
Status: current
- The maximal nominal interval between successive polling grants
opportunities for this Service Flow.
Values are in MS.
If the parameter is omitted, 0 is assumed.
danIf2fBsReducedQosProfileEntry
Object ID: 1.3.1.4.1.32584.1.7.4.7.1
Syntax: Sequence (Structure)
- danIf2fBsRedQoSProfileIndex
- danIf2fBsRedQosServiceClassName
- danIf2fBsRedQoSMaxSustainedRate
- danIf2fBsRedQoSMaxTrafficBurst
- danIf2fBsRedQoSMinReservedRate
- danIf2fBsRedQoSMaxLatency
- danIf2fBsRedQosDataDeliveryType
- danIf2fBsRedQosUnsolicitedGrantInterval
- danIf2fBsRedQosUnsolicitedPollInterval
- danIf2fBsRedQosHarqEnable
- danIf2fBsRedQosHarqNumRetries
- danIf2fBsRedQosSecurityEnable
- danIf2fBsRedQosProfileDscpMarkingEnable
- danIf2fBsRedQosProfileDscpMarking
- danIf2fBsRedQosServiceClassRowStatus
Access: not-accessible
Status: current
- Description.
danIf2fBsReducedQosProfileTable
Object ID: 1.3.1.4.1.32584.1.7.4.7
Syntax: Sequence of Type (Array)
- DanIf2fBsReducedQosProfileEntry
Access: not-accessible
Status: current
- Table is mainly provide with a way to configure QoS profile using a subset of attributes
danIfActualIpAddressMask
Object ID: 1.3.1.4.1.32584.1.1.2.1.1.2
Syntax: OCTET STRING
Access: read-only
Status: current
- Actual IP address in the following format: a.y.z.w/subnet for example:
192.168.3.4/24
danIfDuplexMode
Object ID: 1.3.1.4.1.32584.1.1.2.1.1.1
Syntax: INTEGER
Constraints:- 0: duplexNA
- 1: duplexHalf
- 2: duplexFull
Access: read-only
Status: current
- Indicate the Duplex mode of the specifoc interface.
- N/A
- Half Duplex
- Full Duplex
danIfExtensionEntry
Object ID: 1.3.1.4.1.32584.1.1.2.1.1
Syntax: Sequence (Structure)
- danIfDuplexMode
- danIfActualIpAddressMask
Access: not-accessible
Status: current
- Description.
danIfExtensionTable
Object ID: 1.3.1.4.1.32584.1.1.2.1
Syntax: Sequence of Type (Array)
- DanIfExtensionEntry
Access: not-accessible
Status: current
- The table contains Design Art Extention to the Standard MIB-2 interface table
danIntRngCode
Object ID: 1.3.1.4.1.32584.1.2.7.1
Syntax: INTEGER
Constraints: 0..255
Access: read-write
Status: current
- Number of Initial ranging codes. Possible values are from 0 to
255.
danIpConfigEntry
Object ID: 1.3.1.4.1.32584.1.1.2.12.1
Syntax: Sequence (Structure)
- danIpConfigInterifIndex
- danIpConfigInterIpAddress
- danIpConfigInterStatus
- danIpConfigInterDhcpStatus
- danIpConfigInterRoutStatus
Access: not-accessible
Status: current
- Table entry is related to a given interface.
The table contains the various interfaces and their attributes, note that not all interfaces are
configurable, user may configure only the relevant interfaces of the version (Wired, Wireless).
Note that the IP address seen is the static configuration (i.e. the assign IP if DHCP is not enable
for the interface)
danIpConfigInterDhcpStatus
Object ID: 1.3.1.4.1.32584.1.1.2.12.1.4
Syntax: INTEGER
Constraints:- 0: enable
- 1: disable
Access: read-write
Status: current
- Disable DHCP client (true indicate DHCPdisable)
danIpConfigInterIpAddress
Object ID: 1.3.1.4.1.32584.1.1.2.12.1.2
Syntax: OCTET STRING
Access: read-write
Status: current
- IP address in the following format: a.y.z.w/subnet for example:
192.168.3.4/24
When the subnet is ommited a default 32 subnet is taken (e.g. 192.168.3.4 --> 192.168.3.4/32)
danIpConfigInterRoutStatus
Object ID: 1.3.1.4.1.32584.1.1.2.12.1.5
Syntax: INTEGER
Constraints:- 0: enable
- 1: disable
Access: read-write
Status: current
- Disable routing (true indicate routing disable)
danIpConfigInterStatus
Object ID: 1.3.1.4.1.32584.1.1.2.12.1.3
Syntax: INTEGER
Constraints:- 0: enable
- 1: disable
Access: read-write
Status: current
- Disable IP interface (true indicate interface disabled)
danIpConfigInterifIndex
Object ID: 1.3.1.4.1.32584.1.1.2.12.1.1
Syntax: INTEGER
Constraints: 0..4
Access: read-only
Status: current
- Interface corresponding Ifindex
danIpConfigTable
Object ID: 1.3.1.4.1.32584.1.1.2.12
Syntax: Sequence of Type (Array)
- DanIpConfigEntry
Access: not-accessible
Status: current
- Table contains the various interfaces and their attributes, note that not all interfaces are
configurable, user may configure only the relevant interfaces of the version (Wired, Wireless).
Note that the IP address seen is the static configuration (i.e. the assign IP if DHCP is not enable
for the interface)
danKeyLifetime
Object ID: 1.3.1.4.1.32584.1.6.4
Syntax: INTEGER
Constraints: 86400..6048000
Access: read-write
Status: current
- Key Life time in seconds
danLattitude
Object ID: 1.3.1.4.1.32584.1.1.1.5
Syntax: OCTET STRING
Access: read-write
Status: current
- System installation Lattitue, Range -90 to 90
Implemented as free format Text
danLocationStatsState
Object ID: 1.3.1.4.1.32584.1.1.1.12.9
Syntax: INTEGER
Constraints:- 0: disabled
- 1: enabled
Access: read-only
Status: current
-
danLogGenericEventDevId
Object ID: 1.3.1.4.1.32584.1.4.1.1.2.2.1.2
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-only
Status: current
- The MAC address of the Event source (e.g. SS MAC address)
danLogGenericEventEntry
Object ID: 1.3.1.4.1.32584.1.4.1.1.2.2.1
Syntax: Sequence (Structure)
- danLogGenericEventTime
- danLogGenericEventDevId
- danLogGenericEventId
- danLogGenericEventExtValInt
Access: not-accessible
Status: current
- Entries appear in this table when events occur, and are
removed to make ways for new entries when buffer is full,
the entry passes the lifetime limit. This table is
indexed by wmanDevCmnDeviceIndex and
wmanDevCmnEventLogIndex.
danLogGenericEventExtValInt
Object ID: 1.3.1.4.1.32584.1.4.1.1.2.2.1.4
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Relevant value of type Integer for this event (e.g. 1 for SS conected)
danLogGenericEventId
Object ID: 1.3.1.4.1.32584.1.4.1.1.2.2.1.3
Syntax: INTEGER
Constraints:- 1: rssiLowOn
- 10: ssDynamicServiceFail
- 12: sfEvent
- 13: bsStartup
- 14: dhcpLostOn
- 15: dhcpLostOff
- 16: syncLost
- 17: syncRestored
- 18: channelSelected
- 19: interferenceDetected
- 2: rssiLowOff
- 3: rssiHighOn
- 4: rssiHighOff
- 5: perOn
- 6: perOff
- 7: ssStatus
- 8: ssPKMErr
Access: read-only
Status: current
- Event ID as defined in the danGenericEventControlTable
danLogGenericEventTable
Object ID: 1.3.1.4.1.32584.1.4.1.1.2.2
Syntax: Sequence of Type (Array)
- DanLogGenericEventEntry
Access: not-accessible
Status: current
- This is the Syslog table that is used to store local
events. This table should reside in the non-volatile
memory that should presist after power cycle or reboot.
The number of entries in this table is determined by
wmanDevCmnEventLogEntryLimit. It is a wrap around buffer.
When the buffer is full, the oldest entry will be removed
to make room for the newest entry.
danLogGenericEventTime
Object ID: 1.3.1.4.1.32584.1.4.1.1.2.2.1.1
Syntax: INTEGER
Constraints: 0..4294967295
Access: read-only
Status: current
- The value of sysUpTime when the entry was placed in the
log. If the entry occurred before the most recent
management system initialization this object value must
be set to zero.
danLongtitude
Object ID: 1.3.1.4.1.32584.1.1.1.6
Syntax: OCTET STRING
Access: read-write
Status: current
- System installation Longtitude, Range -180 to 180
Implemented as free format Text
danMaxSF4BS
Object ID: 1.3.1.4.1.32584.1.1.1.3
Syntax: INTEGER
Constraints: 1..800
Access: read-only
Status: current
- Max number of service flow records per AP
danMaxSF4SM
Object ID: 1.3.1.4.1.32584.1.1.1.4
Syntax: INTEGER
Constraints: 2..8
Access: read-only
Status: current
- Max number of service flow records per SM
danMaxSupportedCPE
Object ID: 1.3.1.4.1.32584.1.1.1.2
Syntax: INTEGER
Constraints: 1..200
Access: read-only
Status: current
- Max number of CPEs that can be registered with AP
danMccFwdMulticast
Object ID: 1.3.1.4.1.32584.1.9.6
Syntax: INTEGER
Constraints:- 0: disable
- 1: enable
Access: read-write
Status: current
- Boolean. Ethernet DL multicast traffic - either discard or flood.
- False: discard multicast traffic
- True: downlink multicast traffic is forwarded over MCC (flood).
Default is False.
danMccMcs
Object ID: 1.3.1.4.1.32584.1.7.1.8
Syntax: INTEGER
Constraints:- 10: quam64_5_6
- 3: qpsk_1_2
- 4: qpsk_3_4
- 5: quam16_1_2
- 6: quam16_3_4
- 7: quam64_1_2
- 8: quam64_2_3
- 9: quam64_3_4
Access: read-write
Status: current
- Enum. Specifies the MCS of the MCCs. Range is [3 - 10] Default value is 3 (QPSK1/2)
danMccSecurityEnable
Object ID: 1.3.1.4.1.32584.1.7.1.7
Syntax: INTEGER
Constraints:- 0: disable
- 1: enable
Access: read-write
Status: current
- Bool. Enables/Disables security on MCC.
True: enabled
False: disabled
Default is false.
danMibLastElement
Object ID: 1.3.1.4.1.32584.1.90
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Must be last OID needed for SNMPV1 support
danMngAirIf
Object ID: 1.3.1.4.1.32584.1.9.7
Syntax: INTEGER
Constraints:- 0: airMngDisable
- 1: airMngEnable
Access: read-write
Status: current
- Boolean. Determine whether AP is manageable from air
interface.
- False: AP is manageable from Ethernet interface only.
- True: AP is manageable from both Ethernet and air interfaces
Default is False.
danMngQmFactor
Object ID: 1.3.1.4.1.32584.1.9.8
Syntax: Gauge
Constraints: 30..3600
Access: read-write
Status: current
- Integer. Number of bytes to drop from RX full queue before next insertion is possible
danNtpServerAddress
Object ID: 1.3.1.4.1.32584.1.1.6.7.1.2
Syntax: OCTET STRING
Access: read-write
Status: current
- Active NTP servers Address (IP or name)
danNtpServerEnable
Object ID: 1.3.1.4.1.32584.1.1.6.7.1.3
Syntax: INTEGER
Constraints:- 1: active
- 2: n_notInService
- 3: n_notReady
- 4: n_createAndGo
- 5: createAndWait
- 6: destroy
Access: read-write
Status: current
- Status of the server
danNtpServerEntry
Object ID: 1.3.1.4.1.32584.1.1.6.7.1
Syntax: Sequence (Structure)
- danNtpServerIndex
- danNtpServerAddress
- danNtpServerEnable
Access: not-accessible
Status: current
- The NTP server table contains addresses of NTP servers. The table size is fixed to the
maximum supported server.
danNtpServerIndex
Object ID: 1.3.1.4.1.32584.1.1.6.7.1.1
Syntax: INTEGER
Constraints: 0..4
Access: read-write
Status: current
- NPT server index
danNtpServerPolling
Object ID: 1.3.1.4.1.32584.1.1.6.5
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- NTP Polling period
danNtpServerTable
Object ID: 1.3.1.4.1.32584.1.1.6.7
Syntax: Sequence of Type (Array)
- DanNtpServerEntry
Access: not-accessible
Status: current
- The NTP server table contains addresses of NTP servers. The table size is fixed to the
maximum supported server.
danNtpStatus
Object ID: 1.3.1.4.1.32584.1.1.6.6
Syntax: INTEGER
Constraints:- 0: enable
- 1: disable
Access: read-write
Status: current
- NTP enable/disable
danNtpSysClock
Object ID: 1.3.1.4.1.32584.1.1.6.4
Syntax: Gauge
Constraints: 0..4294967295
Access: read-write
Status: current
- System time synchronized by NTP in NTP format (seconds from 1/1/1900)
Note: valid only if NTP is enabled
danNtpSystemDST
Object ID: 1.3.1.4.1.32584.1.1.6.3
Syntax: INTEGER
Constraints: 0..1440
Access: read-write
Status: current
- Day-light-saving mode (offset in minutes)
danNtpSystemTZHr
Object ID: 1.3.1.4.1.32584.1.1.6.1
Syntax: INTEGER
Constraints: -12..14
Access: read-write
Status: current
- Time-zone offset in Hour
danNtpSystemTZMin
Object ID: 1.3.1.4.1.32584.1.1.6.2
Syntax: INTEGER
Constraints: 0..59
Access: read-write
Status: current
- Time-zone offset in Minutes
danPcinrBackoffValue
Object ID: 1.3.1.4.1.32584.1.2.4.2.3
Syntax: INTEGER
Constraints: -10..53
Access: read-write
Status: current
- The backoff value in unit of db used by the DL rate Adpatation based on Physical CINR
danPeriRngCode
Object ID: 1.3.1.4.1.32584.1.2.7.2
Syntax: INTEGER
Constraints: 0..255
Access: read-write
Status: current
- Number of periodic ranging codes. Possible values are from 0 to
255.
danPostMortemCommand
Object ID: 1.3.1.4.1.32584.1.3.3.2
Syntax: INTEGER
Constraints:- 0: danPmNoAction
- 1: danPmSaveFile
- 2: danPmSaveCompFile
- 3: danPmSendMail
- 4: danPmUponEnable
Access: read-write
Status: current
- Activate Post Mortem commands:
- danPmSaveFile(1) - Save Post Mortem information in file defined in 'danPostMortemFileName'
- danPmSaveCompFile(2) - Save Post Mortem information in file defined in 'danPostMortemFileName' in compressed form
- danPmSendMail(3) - Send Post Mortem information by email to recipient defined in danPostMortemDestEmail
- danPmUponEnable(4) - Activate all enabled functionalties as define in danPostMortemActionEnabler
danPostMortemDestEmail
Object ID: 1.3.1.4.1.32584.1.3.3.1.7
Syntax: OCTET STRING
Access: read-write
Status: current
- The Post Mortem recipient email address
danPostMortemMailOnStart
Object ID: 1.3.1.4.1.32584.1.3.3.1.1
Syntax: INTEGER
Constraints:- 0: false
- 1: true
Access: read-write
Status: current
- True value will initiate PM mail send at system start (after ASSERT)
danPostMortemSMTPClientDomain
Object ID: 1.3.1.4.1.32584.1.3.3.1.3
Syntax: OCTET STRING
Access: read-write
Status: current
- The SMTP client domain name
danPostMortemSMTPClientName
Object ID: 1.3.1.4.1.32584.1.3.3.1.4
Syntax: OCTET STRING
Access: read-write
Status: current
- Sender of Post Mortem email address
danPostMortemSMTPClientPwd
Object ID: 1.3.1.4.1.32584.1.3.3.1.9
Syntax: OCTET STRING
Access: read-write
Status: current
- Sender of Post Mortem email address
danPostMortemSMTPServerAddr
Object ID: 1.3.1.4.1.32584.1.3.3.1.5
Syntax: OCTET STRING
Access: read-write
Status: current
- Description.
danRFAntenaDirection
Object ID: 1.3.1.4.1.32584.1.1.4.2.1.6
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-write
Status: current
- Provide information about Antena direction .
Use this for predicting the coverage of directional antennas in the physical map. The values would be zero to 360 degrees, using due north as zero.
Note: range is not enforced
danRFAntenaHeight
Object ID: 1.3.1.4.1.32584.1.1.4.2.1.5
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-write
Status: current
- Provide information about Antena heights
danRFAntennaGain
Object ID: 1.3.1.4.1.32584.1.1.4.2.1.4
Syntax: INTEGER
Constraints: 0..20
Access: read-write
Status: current
- set the RF Antenna gain DBi
Note:
-------
1. The Value of wmanIf2BsCmnPhyBsEIRP is affected from danRFPout (RadioPower) and danRFAntennaGain (antennaGain), i.e. when one of those parameter is
configured the EIRP will reflect the change. Eirp is calculated according to the
following equation:
Eirp = danRFPout + danRFAntennaGain
2. The Value of wmanIf2BsCmnPhyMaxEirp is affected from danRFAntennaGain, i.e.
when one of that parameter is configured the MaxEIRP will reflect the change.
MaxEirp is calculated according to the following equation:
maxEirp = Min((danC2nBase + 15), -60) - danRFAntennaGain
danRFPout and danRFAntennaGain are of the 'firts' (the lowe index radio) mouned radio
danRFEntry
Object ID: 1.3.1.4.1.32584.1.1.4.2.1
Syntax: Sequence (Structure)
- danRadioIndex
- danRFrequency
- danRFPout
- danRFAntennaGain
- danRFAntenaHeight
- danRFAntenaDirection
- danRfAgcGain
Access: not-accessible
Status: current
- Radio related attributes, table size is fixed limited to the maximum number of radio supported.
Each entry refers to one Radio and may be updated
danRFPout
Object ID: 1.3.1.4.1.32584.1.1.4.2.1.3
Syntax: OCTET STRING
Access: read-write
Status: current
- set TX Power in dBm.
Range: -25dBm < value < 26dBm
Note:
-------
1. The Value of wmanIf2BsCmnPhyBsEIRP is affected from danRFPout (RadioPower) and danRFAntennaGain (antennaGain), i.e. when one of those parameter is
configured the EIRP will reflect the change. Eirp is calculated according to the
following equation:
Eirp = danRFPout + danRFAntennaGain
2. The Value of wmanIf2BsCmnPhyMaxEirp is affected from danRFAntennaGain, i.e.
when one of that parameter is configured the MaxEIRP will reflect the change.
MaxEirp is calculated according to the following equation:
maxEirp = Min((danC2nBase + 15), -60) - danRFAntennaGain
danRFPout and danRFAntennaGain are of the 'firts' (the lower index radio) mouned radio
danRFTable
Object ID: 1.3.1.4.1.32584.1.1.4.2
Syntax: Sequence of Type (Array)
- DanRFEntry
Access: not-accessible
Status: current
- Radio related attributes, table size is fixed limited to the maximum number of radio supported.
danRFrequency
Object ID: 1.3.1.4.1.32584.1.1.4.2.1.2
Syntax: INTEGER
Constraints: 2000000..6000000
Access: read-only
Status: current
- RF Frequency in KHz
The configured AP central frequency may be configured via the following MIB variable:
danCenterFrequency
Setting danCenterFrequencywill result in changing the frequency of all mounted Radios.
danRaEnableMimoSupport
Object ID: 1.3.1.4.1.32584.1.2.1.9
Syntax: INTEGER
Constraints:- 0: false
- 1: true
Access: read-write
Status: current
- Enable MIMO to the Rate Adaptation Algorithm.
when set the RA algorithm will put the connection
in MIMO or not in MIMO according to the SNR and Multipath indications.
danRadioIndex
Object ID: 1.3.1.4.1.32584.1.1.4.2.1.1
Syntax: INTEGER
Constraints: 0..5
Access: read-only
Status: current
- Radio Index
danRegisteredAccountEntry
Object ID: 1.3.1.4.1.32584.1.1.5.1.1
Syntax: Sequence (Structure)
- danUserName
- danUserLevel
- danUserPassword
- danUserState
- danAccountAction
- danUserAuthAlg
- danUserPrivAlg
Access: not-accessible
Status: current
- Each entry in the table refers to one registered user account
danRegisteredAccountTable
Object ID: 1.3.1.4.1.32584.1.1.5.1
Syntax: Sequence of Type (Array)
- DanRegisteredAccountEntry
Access: not-accessible
Status: current
- Table maintain all registered user's account in the system.
danRestorePointAction
Object ID: 1.3.1.4.1.32584.1.3.2.2.1.4
Syntax: INTEGER
Constraints:- 0: n_actNoAction
- 1: actRestore
Access: read-write
Status: current
- Action allowed for restore point:
- Save (save current configuration as selected restore-point)
- Restore (restore configuration according to selected restore point)
danRestorePointDate
Object ID: 1.3.1.4.1.32584.1.3.2.2.1.3
Syntax: OCTET STRING
Access: read-only
Status: current
- Restore point save time (GMT)
danRestorePointEntry
Object ID: 1.3.1.4.1.32584.1.3.2.2.1
Syntax: Sequence (Structure)
- danRestorePointId
- danRestorePointName
- danRestorePointDate
- danRestorePointAction
Access: not-accessible
Status: current
- Each entry represent a restore points.
danRestorePointId
Object ID: 1.3.1.4.1.32584.1.3.2.2.1.1
Syntax: INTEGER
Constraints: 1..4
Access: read-only
Status: current
- Resore point unique id (1..4)
danRestorePointName
Object ID: 1.3.1.4.1.32584.1.3.2.2.1.2
Syntax: OCTET STRING
Access: read-write
Status: current
- Restore point given name
danRestorePointTable
Object ID: 1.3.1.4.1.32584.1.3.2.2
Syntax: Sequence of Type (Array)
- DanRestorePointEntry
Access: not-accessible
Status: current
- Table shows and allow to save all restore points. Up to 4 restore points are available.
danRfAgcGain
Object ID: 1.3.1.4.1.32584.1.1.4.2.1.8
Syntax: OCTET STRING
Access: read-write
Status: current
- RF AGC GAIN
danSNMPMode
Object ID: 1.3.1.4.1.32584.1.1.2.15
Syntax: INTEGER
Constraints:- 0: snmpv1v2
- 1: snmpv3
Access: read-only
Status: current
- Identifies the SNMP version in use, V1 V2 or V3
danSatelliteUsed
Object ID: 1.3.1.4.1.32584.1.1.1.12.2
Syntax: INTEGER
Constraints: -1..14
Access: read-only
Status: current
- Display the number of satellites used for
tracking. Default value is 0.
danSatelliteVisible
Object ID: 1.3.1.4.1.32584.1.1.1.12.3
Syntax: INTEGER
Constraints: -1..14
Access: read-only
Status: current
- Display the number of satellites in the view.
Default value is 0.
danSelectedScriptBw
Object ID: 1.3.1.4.1.32584.1.1.7.3
Syntax: INTEGER
Constraints:- 1: bw3_5MHz
- 2: bw5MHz
- 3: bw7MHz
- 4: bw10MHz
Access: read-write
Status: current
- Allows the user to select the Initializing Mode script according to predefined BW.
Supported BWs are (3.5, 5, 7 or 10 MHz)
The selected BW is affected once 'danActiveModeScriptId' is configured to
'modeByBwAndRatio'
danSelectedScriptMap
Object ID: 1.3.1.4.1.32584.1.1.7.7
Syntax: INTEGER
Constraints:- 0: scriptMap5
- 1: scriptMap7
Access: read-write
Status: current
- Allows the user to select the Initializing Mode script according to predefined Map.
The selected Ratio is affected once 'danActiveModeScriptId' is
configured to 'modeByBwAndRatio'
Supported maps are 5/7 symbols
danSelectedScriptRatio
Object ID: 1.3.1.4.1.32584.1.1.7.4
Syntax: INTEGER
Constraints:- 1: dlRatio55Percent
- 2: dlRatio65Percent
- 3: dlRatio75Percent
Access: read-write
Status: current
- Allows the user to select the Initializing Mode script according to predefined DL/UL Ratio.
The selected Ratio is affected once 'danActiveModeScriptId' is
configured to 'modeByBwAndRatio'
Supported ratios are 55%,65% or 75%
danSerialType
Object ID: 1.3.1.4.1.32584.1.1.1.7
Syntax: INTEGER
Constraints:- 0: none
- 1: uGps
Access: read-write
Status: current
- Atribute to control serial interface connection to operate in CLI or uGps mode.
danSeurityPolicy
Object ID: 1.3.1.4.1.32584.1.6.3
Syntax: INTEGER
Constraints:- 0: noAuthNoEnc
- 1: optAuthOptEnc
- 2: frcAuthOptEnc
Access: read-write
Status: current
- Define system's Authentication/Encryption policy:
0 No authentication, no encryption mode
1 Optional authentication and encryption
2 Forced authentication, optional encryption,
in this mode unauthenticated subscribers will be rejected by network,
once authenticated subscriber will be free to create encrypted and not encrypted service flows.
3 Forced authentication and encryption, in this mode unauthenticated subscribers will be rejected by network,
once authenticated subscriber will be not allowed to create not encrypted service flows.
danSharedSecret
Object ID: 1.3.1.4.1.32584.1.6.2
Syntax: OCTET STRING
Access: read-write
Status: current
- A string used to secure the communication between AAA server and Authenticator in the AP
the attribute is 'write-only'
danStartofRngCodeGrp
Object ID: 1.3.1.4.1.32584.1.2.7.5
Syntax: INTEGER
Constraints: 0..255
Access: read-write
Status: current
- Indicates the starting number, S, of the group of codes used for
this uplink. If not specified, the default value shall be set to
zero. All the ranging codes used on this uplink will be between S
and ((S+O+N+M+L) mod 256). Where,
N is the number of initial-ranging codes
M is the number of periodic-ranging codes
L is the number of bandwidth-request codes
O is the number of handover-ranging codes
The range of the values is from 0 to 255.
danSyncClockDrift
Object ID: 1.3.1.4.1.32584.1.1.3.4.1
Syntax: OCTET STRING
Access: read-only
Status: current
- The accuracy of system Clock in PPM
danSyncHoldoffInterval
Object ID: 1.3.1.4.1.32584.1.1.3.3
Syntax: INTEGER
Constraints: 0..600
Access: read-write
Status: current
- Attribute define the Holdoff interval, During this time the 1 pps will be held-off based on previously learned pattern of corrections.
After the hold-off period is over AP will stop transmitting and enter to idle mode until 1 pps signal is available.
Holdoff interval is given in Seconds.
danSyncSource
Object ID: 1.3.1.4.1.32584.1.1.3.1
Syntax: INTEGER
Constraints:- 0: syncSourceInternalFreeRun
- 1: syncSourceGPS
- 3: syncSourceBrdGPS
- 9: n_syncSourceUndef
Access: read-write
Status: current
- Identify the type of synchronization in use:
- syncSourceInternalFreeRun(0),
- syncSourceGPS(1) - GPS Sync from Power Source
- syncSourcePreamble(2) - Future
- syncSourceBrdGPS(3) - GPS Sync from dedicated on Board PIN
- syncSourceUndef(9) - Undefined
danSyncStatus
Object ID: 1.3.1.4.1.32584.1.1.3.2
Syntax: INTEGER
Constraints:- 0: syncStateNoSync
- 1: syncStateSync
- 2: syncStateSync1PPSLost
Access: read-only
Status: current
- Provide information about the status of Synchronization,
the value is relevant for any external Sync Source selected.
If the selected sync source is internal, only the No Sync
state is returned.
- syncStateNoSync(0) - Not in Sync
- syncStateSync(1) - In sync
- syncStateSync1PPSLost(2) - External sync missing operating based
on internal clock
danSysLogIpAddress
Object ID: 1.3.1.4.1.32584.1.1.2.11
Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current
- The syslog server IP address. The log messages will be sent to
danSysLogLevel
Object ID: 1.3.1.4.1.32584.1.1.2.13
Syntax: INTEGER
Constraints:- 1: logInfoLevel
- 2: logWarningLevel
- 3: logErrorLevel
- 4: logEmergencyLevel
Access: read-write
Status: current
- Determine the current log level
danSyslogStatus
Object ID: 1.3.1.4.1.32584.1.1.2.10
Syntax: INTEGER
Constraints:- 0: disable
- 1: enable
Access: read-write
Status: current
- Disable syslog connection (true if syslog is disabled)
danTEKTimeout
Object ID: 1.3.1.4.1.32584.1.6.5
Syntax: INTEGER
Constraints: 1800..604800
Access: read-write
Status: current
- TEK Timeout in seconds
danTrackingMode
Object ID: 1.3.1.4.1.32584.1.1.1.12.1
Syntax: INTEGER
Constraints:- -1: notAvailable
- 0: noFix
- 1: twoD
- 2: threeD
Access: read-only
Status: current
- Display the tracking mode. Diplay noFix, when
no satellite is being tracked, twoD when less
than 4 satellites tracked, threeD when 4 or more
satellites are tracked
danTrapDestEnable
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.2.1.3
Syntax: INTEGER
Constraints:- 0: disable
- 1: enable
Access: read-write
Status: current
- Defines is the related trap destination is active (i.e trap will be sent to this address)
danTrapDestEntry
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.2.1
Syntax: Sequence (Structure)
- danTrapDestIndex
- danTrapDestIpAddr
- danTrapDestEnable
- danTrapUserName
Access: not-accessible
Status: current
- Each table entry contains attribute of trap destination entity
danTrapDestIndex
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.2.1.1
Syntax: INTEGER
Constraints: 0..2
Access: read-only
Status: current
- The index identifies the trap destination. The number of
rows is limited to three.
danTrapDestIpAddr
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.2.1.2
Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current
- IP address of SNMP manager configured as a trap (V1)
destination for versions V1 and V2 of SNMP.
danTrapDestTable
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.2
Syntax: Sequence of Type (Array)
- DanTrapDestEntry
Access: not-accessible
Status: current
- This table contains the list of NMS which are destination for system traps.
The table size is fixed and reflect the maximum trap destination supported by the system (3).
danTrapUserName
Object ID: 1.3.1.4.1.32584.1.4.1.1.1.2.1.4
Syntax: OCTET STRING
Access: read-write
Status: current
- Relevant only for SNMPv3, determine the user whose keys
to use when creating the Trap message
danUgpsOffset
Object ID: 1.3.1.4.1.32584.1.1.3.5
Syntax: INTEGER
Constraints: -2147482647..2147483647
Access: read-only
Status: current
- Attribute define the offset to the GPS 1PPS to make the uGps
compatible with CMM.
offset is given in 10th of nano seconds
danUlAccNumSymbols
Object ID: 1.3.1.4.1.32584.1.2.2.1.6
Syntax: INTEGER
Constraints: 0..21
Access: read-only
Status: current
- Size of UL Access sub frame in symbols
danUplinkBackoffValue
Object ID: 1.3.1.4.1.32584.1.2.4.2.4
Syntax: INTEGER
Constraints: -10..53
Access: read-write
Status: current
- The backoff value in unit of db used by the UL rate Adpatation
danUserAuthAlg
Object ID: 1.3.1.4.1.32584.1.1.5.1.1.6
Syntax: INTEGER
Constraints:- 0: authAlgNone
- 1: authAlgMD5
- 2: authAlgSHA1
Access: read-only
Status: current
- Defines an authentication protocol for user , when SNMPv3
is supported
danUserLevel
Object ID: 1.3.1.4.1.32584.1.1.5.1.1.2
Syntax: INTEGER
Constraints:- 2: usrInstLvl
- 3: usrAdminLvl
- 4: usrRootLvl
- 5: usrSnmpRoLvl
- 6: usrSnmpRwLvl
Access: read-write
Status: current
- Maintain the assigned level of the account (Root, installer, technician, guest)
danUserName
Object ID: 1.3.1.4.1.32584.1.1.5.1.1.1
Syntax: OCTET STRING
Access: read-write
Status: current
- Registered unique user name
danUserPassword
Object ID: 1.3.1.4.1.32584.1.1.5.1.1.3
Syntax: OCTET STRING
Access: read-write
Status: current
- User password (write only)
danUserPrivAlg
Object ID: 1.3.1.4.1.32584.1.1.5.1.1.7
Syntax: INTEGER
Constraints:- 0: privAlgNone
- 1: privAlgCBCDE
Access: read-only
Status: current
- Defines privacy protocol for user , when SNMPv3
is supported
danUserState
Object ID: 1.3.1.4.1.32584.1.1.5.1.1.4
Syntax: INTEGER
Constraints:- 0: accountDisabled
- 1: accountEnabled
- 2: n_accountLocked
Access: read-write
Status: current
- Reflect and define the account state (enabled or disabled)
danVlanMngEnable
Object ID: 1.3.1.4.1.32584.1.9.4.1
Syntax: INTEGER
Constraints:- 0: false
- 1: true
Access: read-write
Status: current
- Boolean. Determine VLAN management capabilities.
- False: management traffic to/from AP is untagged
- True: management traffic to/from AP is tagged
Default is False.
danVlanMngId
Object ID: 1.3.1.4.1.32584.1.9.4.2
Syntax: INTEGER
Constraints: 1..4096
Access: read-write
Status: current
- Define the Management dedicated VLAN ID.
When danVlanMngEnable is true inbound management traffic must be tagged with VLAN ID equals danVlanMngId.
Outbound management traffic is tagged by AP with this VID.
Default is 1 (VLAN one).
danVlanMngPrio
Object ID: 1.3.1.4.1.32584.1.9.4.3
Syntax: INTEGER
Constraints: 1..4096
Access: read-write
Status: current
- Define the Management VLAN priority value.
When danVlanMngEnable is true outbound management traffic is being tagged,
danVlanMngPrio is used for the priority field of the management tag.
Default is 0.
danWebMngSecurityMode
Object ID: 1.3.1.4.1.32584.1.1.2.16
Syntax: INTEGER
Constraints:- 1: https
- 2: http
Access: read-only
Status: current
- This attribute determines the WEB access security mode as follows:
1. ? Secured mode. Only HTTPS is allowed.
2. ? Not secured mode. Only HTTP is allowed.
Default is 1.
hwRev
Object ID: 1.3.1.4.1.32584.1.1.8.1
Syntax: OCTET STRING
Access: read-only
Status: current
- Provide information about HW revision
ipRouteAge
Object ID: 1.3.1.4.1.32584.1.16.1.4.1.1.10
Syntax: INTEGER
Access: read-only
Status: current
- The number of seconds since this route was last
updated or otherwise determined to be correct.
Note that no semantics of `too old' can be implied
except through knowledge of the routing protocol
by which the route was learned.
ipRouteDest
Object ID: 1.3.1.4.1.32584.1.16.1.4.1.1.1
Syntax: STRING
Constraints: SIZE (4)
Access: read-only
Status: current
- The destination IP address of this route. An
entry with a value of 0.0.0.0 is considered a
default route. Multiple routes to a single
destination can appear in the table, but access to
such multiple entries is dependent on the table-
access mechanisms defined by the network
management protocol in use.
ipRouteEntry
Object ID: 1.3.1.4.1.32584.1.16.1.4.1.1
Syntax: Sequence (Structure)
- ipRouteDest
- ipRouteIfIndex
- ipRouteMetric1
- ipRouteMetric2
- ipRouteMetric3
- ipRouteMetric4
- ipRouteNextHop
- ipRouteType
- ipRouteProto
- ipRouteAge
- ipRouteMask
- ipRouteMetric5
- ipRouteInfo
Access: not-accessible
Status: current
- A route to a particular destination.
ipRouteIfIndex
Object ID: 1.3.1.4.1.32584.1.16.1.4.1.1.2
Syntax: INTEGER
Access: read-only
Status: current
- The index value which uniquely identifies the
local interface through which the next hop of this
route should be reached. The interface identified
by a particular value of this index is the same
interface as identified by the same value of
ifIndex.
ipRouteInfo
Object ID: 1.3.1.4.1.32584.1.16.1.4.1.1.13
Syntax: OBJECT IDENTIFIER
Access: read-only
Status: current
- A reference to MIB definitions specific to the
particular routing protocol which is responsible
for this route, as determined by the value
specified in the route's ipRouteProto value. If
this information is not present, its value should
be set to the OBJECT IDENTIFIER { 0 0 }, which is
a syntatically valid object identifier, and any
conformant implementation of ASN.1 and BER must be
able to generate and recognize this value.
ipRouteMask
Object ID: 1.3.1.4.1.32584.1.16.1.4.1.1.11
Syntax: STRING
Constraints: SIZE (4)
Access: read-only
Status: current
- Indicate the mask to be logical-ANDed with the
destination address before being compared to the
value in the ipRouteDest field. For those systems
that do not support arbitrary subnet masks, an
agent constructs the value of the ipRouteMask by
determining whether the value of the correspondent
ipRouteDest field belong to a class-A, B, or C
network, and then using one of:
mask network
255.0.0.0 class-A
255.255.0.0 class-B
255.255.255.0 class-C
If the value of the ipRouteDest is 0.0.0.0 (a
default route), then the mask value is also
0.0.0.0. It should be noted that all IP routing
subsystems implicitly use this mechanism.
ipRouteMetric1
Object ID: 1.3.1.4.1.32584.1.16.1.4.1.1.3
Syntax: INTEGER
Access: read-only
Status: current
- The primary routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
ipRouteProto value. If this metric is not used,
its value should be set to -1.
ipRouteMetric2
Object ID: 1.3.1.4.1.32584.1.16.1.4.1.1.4
Syntax: INTEGER
Access: read-only
Status: current
- An alternate routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
ipRouteProto value. If this metric is not used,
its value should be set to -1.
ipRouteMetric3
Object ID: 1.3.1.4.1.32584.1.16.1.4.1.1.5
Syntax: INTEGER
Access: read-only
Status: current
- An alternate routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
ipRouteProto value. If this metric is not used,
its value should be set to -1.
ipRouteMetric4
Object ID: 1.3.1.4.1.32584.1.16.1.4.1.1.6
Syntax: INTEGER
Access: read-only
Status: current
- An alternate routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
ipRouteProto value. If this metric is not used,
its value should be set to -1.
ipRouteMetric5
Object ID: 1.3.1.4.1.32584.1.16.1.4.1.1.12
Syntax: INTEGER
Access: read-only
Status: current
- An alternate routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
ipRouteProto value. If this metric is not used,
its value should be set to -1.
ipRouteNextHop
Object ID: 1.3.1.4.1.32584.1.16.1.4.1.1.7
Syntax: STRING
Constraints: SIZE (4)
Access: read-only
Status: current
- The IP address of the next hop of this route.
(In the case of a route bound to an interface
which is realized via a broadcast media, the value
of this field is the agent's IP address on that
interface.)
ipRouteProto
Object ID: 1.3.1.4.1.32584.1.16.1.4.1.1.9
Syntax: INTEGER
Constraints:- 1: other
- 10: es-is
- 11: ciscoIgrp
- 12: bbnSpfIgp
- 13: ospf
- 14: bgp
- 2: local
- 3: netmgmt
- 4: icmp
- 5: egp
- 6: ggp
- 7: hello
- 8: rip
- 9: is-is
Access: read-only
Status: current
- The routing mechanism via which this route was
learned. Inclusion of values for gateway routing
protocols is not intended to imply that hosts
should support those protocols.
ipRouteTable
Object ID: 1.3.1.4.1.32584.1.16.1.4.1
Syntax: Sequence of Type (Array)
- IpRouteEntry
Access: not-accessible
Status: current
- This entity's IP Routing table.
Note: The entire is implemented as Read-Only
ipRouteType
Object ID: 1.3.1.4.1.32584.1.16.1.4.1.1.8
Syntax: INTEGER
Constraints:- 1: other
- 2: invalid
- 3: direct
- 4: indirect
Access: read-only
Status: current
- The type of route. Note that the values
direct(3) and indirect(4) refer to the notion of
direct and indirect routing in the IP
architecture.
Setting this object to the value invalid(2) has
the effect of invalidating the corresponding entry
in the ipRouteTable object. That is, it
effectively dissasociates the destination
identified with said entry from the route
identified with said entry. It is an
implementation-specific matter as to whether the
agent removes an invalidated entry from the table.
Accordingly, management stations must be prepared
to receive tabular information from agents that
corresponds to entries not currently in use.
Proper interpretation of such entries requires
examination of the relevant ipRouteType object.
rfType
Object ID: 1.3.1.4.1.32584.1.1.4.1
Syntax: OCTET STRING
Access: read-only
Status: current
- Provide information about the RF Type and the frequency/Power limitations
wmanIf2BsCmnPhyBsEIRP
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.9.1.2.1.1
Syntax: INTEGER
Constraints: -32768..32767
Access: read-only
Status: current
- The EIRP is the equivalent isotropic radiated power of
the base station, which is computed for a simple
single-antenna transmitter.
The Value of wmanIf2BsCmnPhyBsEIRP is affected from danRFPout (RadioPower) and
danRFAntennaGain (antennaGain), i.e. when one of those parameter are
configured the EIRP will reflect the change. Eirp is calculated according to the
following equation:
Eirp = danRFPout + danRFAntennaGain
wmanIf2BsCmnPhyBsId
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.9.1.2.1.5
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-write
Status: current
- Base station ID.
wmanIf2BsCmnPhyBsRestartCount
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.9.1.2.1.14
Syntax: INTEGER
Constraints: 0..255
Access: read-only
Status: current
- The value is incremented by one whenever BS restarts
wmanIf2BsCmnPhyCellType
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.9.1.2.1.13
Syntax: INTEGER
Constraints: 0..15
Access: read-only
Status: current
- This object indicates the size of the cell. Selection of
value is implementation specific.
0 - the smallest cell
15 - the largest cell.
wmanIf2BsCmnPhyCyclicPrefix
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.9.1.2.1.7
Syntax: INTEGER
Constraints:- 0: oneForth
- 1: oneEighth
- 2: oneSixteenth
- 3: oneThirtySecond
Access: read-only
Status: current
- The ratio of CP time to 'useful' time.Values
are 1/4, 1/8, 1/16 or 1/32.
wmanIf2BsCmnPhyDownlinkCenterFreq
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.9.1.2.1.4
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Downlink center frequency (kHz).
wmanIf2BsCmnPhyDownlinkChannelEntry
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.9.1.2.1
Syntax: Sequence (Structure)
- wmanIf2BsCmnPhyBsEIRP
- wmanIf2BsCmnPhyMaxEirp
- wmanIf2BsCmnPhyDownlinkCenterFreq
- wmanIf2BsCmnPhyBsId
- wmanIf2BsCmnPhyMacVersion
- wmanIf2BsCmnPhyCyclicPrefix
- wmanIf2BsCmnPhyCellType
- wmanIf2BsCmnPhyBsRestartCount
Access: not-accessible
Status: current
- This table provides one row for each downlink channel of
multi-sector BS. An entry in this table exists for each
ifEntry of BS with an ifType of ieee80216WMAN.
wmanIf2BsCmnPhyDownlinkChannelTable
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.9.1.2
Syntax: Sequence of Type (Array)
- WmanIf2BsCmnPhyDownlinkChannelEntry
Access: not-accessible
Status: current
- This table contains common channel attributes that
charaterize the downlink channels
wmanIf2BsCmnPhyMacVersion
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.9.1.2.1.6
Syntax: INTEGER
Constraints:- 5: ieee802Dot16Of2004and16eOf2005
- 6: ieee802Dot16Of2004and16efOf2005
- 7: ieee802Dot16Of04and16efOf05and16gOf07
- 8: ieee802Dot16Of2008
Access: read-only
Status: current
- This parameter specifies the version of 802.16 to which
the message originator conforms.
wmanIf2BsCmnPhyMaxEirp
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.9.1.2.1.3
Syntax: INTEGER
Constraints: -32768..32767
Access: read-only
Status: current
- Initial Ranging Max. equivalent isotropic received power
at BS Signed in units of 1 dBm.
The Value of wmanIf2BsCmnPhyMaxEirp is affected from danRFAntennaGain, i.e.
when one of those parameter are configured the MaxEIRP will reflect the change.
MaxEirp is calculated according to the following equation:
maxEirp = Min((danC2nBase + 15), -60) - danRFAntennaGain
wmanIf2BsCmnPhyUplinkCenterFreq
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.9.1.1.1.2
Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current
- Uplink center frequency (kHz)
wmanIf2BsCmnPhyUplinkChannelEntry
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.9.1.1.1
Syntax: Sequence (Structure)
- wmanIf2BsCmnPhyUplinkCenterFreq
Access: not-accessible
Status: current
- Uplink channel entry
wmanIf2BsCmnPhyUplinkChannelTable
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.9.1.1
Syntax: Sequence of Type (Array)
- WmanIf2BsCmnPhyUplinkChannelEntry
Access: not-accessible
Status: current
- This table contains common channel attributes that
characterize the uplink channels
wmanIf2BsRegisteredSsCount
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.10
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current
- This OID represents the Registered CPE count.
wmanIf2BsRegisteredSsEntry
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.1.1
Syntax: Sequence (Structure)
- wmanIf2BsSsMacAddress
- wmanIf2BsSsBasicCid
- wmanIf2BsSsPrimaryCid
- wmanIf2BsSsSecondaryCid
- wmanIf2BsSsManagementSupport
- wmanIf2BsSsIpManagementMode
- wmanIf2BsSs2ndMgmtArqDnLinkRxDelay
- wmanIf2BsSs2ndMgmtArqUpLinkRxDelay
- wmanIf2BsSs2ndMgmtArqBlockLifetime
- wmanIf2BsSs2ndMgmtArqSyncLossTimeout
- wmanIf2BsSsMacVersion
Access: not-accessible
Status: current
- This table provides one row for each SS that has been
registered in the BS. The primary index is the ifIndex
with an ifType of ieee80216WMAN, indicating the BS sector
with which the SS is associated. wmanIf2BsSsUserGroupId,
indicating the user group for HFDD operation,
wmanIf2BsSsMacAddress identifies the SS being registered.
wmanIf2BsRegisteredSsTable
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.1
Syntax: Sequence of Type (Array)
- WmanIf2BsRegisteredSsEntry
Access: not-accessible
Status: current
- This table contains the basic capability information
of SSs that have been negotiated and agreed between
BS and SS via REG-REQ and REG-RSP messages. An entry
in this table indicates the SS has entered and registered
into the BS.
wmanIf2BsSs2ndMgmtArqBlockLifetime
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.1.1.13
Syntax: INTEGER
Constraints: 0..65535
Access: read-only
Status: current
- The maximum time interval an ARQ fragment will be
managed by the transmitter ARQ machine, once
initial transmission of the fragment has occured.
If transmission or retransmission of the fragment
is not acknowledged by the receiver before the
time limit is reached, the fragment is discarded.
A value of 0 means Infinite.
wmanIf2BsSs2ndMgmtArqDnLinkRxDelay
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.1.1.11
Syntax: INTEGER
Constraints: 0..65535
Access: read-only
Status: current
- The object defines the ARQ receiver delay for
downlink transmission.
wmanIf2BsSs2ndMgmtArqSyncLossTimeout
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.1.1.14
Syntax: INTEGER
Constraints: 0..65535
Access: read-only
Status: current
- The maximum interval before declaring a loss
of synchronization of the sender and receiver
state machines. A value of 0 means Infinite.
wmanIf2BsSs2ndMgmtArqUpLinkRxDelay
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.1.1.12
Syntax: INTEGER
Constraints: 0..65535
Access: read-only
Status: current
- The object defines the ARQ receiver delay for
uplink transmission.
wmanIf2BsSsActionsDeReRegSs
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.7.1.6
Syntax: INTEGER
Constraints:- 0: n_actionsDeReRegSsNoAction
- 1: actionsDeReRegSs
Access: read-write
Status: current
- This object should be implemented as follows:
- When set to actionsDeReRegSs value, instructs BS to
send DREG-CMD to SS with specified action code
- When set to value different than actionsDeReRegSs it
should be ignored
- When read it should return actionsDeReRegSsNoAction
The DREG-CMD message shall be transmitted by the BS on an
SS Basic CID to force the SS to change its access state.
Upon receiving a DREG-CMD, the SS shall take the action
indicated by the action code defined by
wmanIf2BsSsActionsDeReRegSsCode.
wmanIf2BsSsActionsEntry
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.7.1
Syntax: Sequence (Structure)
- wmanIf2BsSsActionsMacAddress
- wmanIf2BsSsActionsResetSs
- wmanIf2BsSsActionsDeReRegSs
Access: not-accessible
Status: current
- The action can be requested for registered SS. BS will decide whether the action
is applicable to the SS based on its current state and
execute it or skip it as defined in each action definition.
wmanIf2BsSsActionsMacAddress
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.7.1.1
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-only
Status: current
-
wmanIf2BsSsActionsResetSs
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.7.1.2
Syntax: INTEGER
Constraints:- 0: n_actionsResetSsNoAction
- 1: actionsResetSs
Access: read-write
Status: current
- This object should be implemented as follows:
- When set to actionsResetSs value, instructs BS to send
RES-CMD to SS
- When set to value different than actionsResetSs it
should be ignored
- When read it should return actionsResetSsNoAction
The RES-CMD message shall be transmitted by the BS on an
SS Basic CID to force the SS to reset itself,
reinitialize its MAC, and repeat initial system access.
wmanIf2BsSsActionsTable
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.7
Syntax: Sequence of Type (Array)
- WmanIf2BsSsActionsEntry
Access: not-accessible
Status: current
- This table contains all the actions specified for SSs in
the standard. The actions are routed down to SS using
unsolicited MAC messages: REG-RSP, DREG-REQ and RES-CMD.
The table also contains the parameters of the actions in
cases where they are specified by the standard.
wmanIf2BsSsBasicCid
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.1.1.2
Syntax: INTEGER
Constraints: 0..65535
Access: read-only
Status: current
- The value of this object indicates the SS's basic CID
that was sent in the RNG-RSP message.
wmanIf2BsSsIpManagementMode
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.1.1.6
Syntax: INTEGER
Constraints:- 0: unmanaged
- 1: ipManaged
Access: read-only
Status: current
- The IP management mode parameter dictates whether
the provider intends to manage the SS on an ongoing
basis via IP-based mechanisms.
wmanIf2BsSsMacAddress
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.1.1.1
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-only
Status: current
-
wmanIf2BsSsMacVersion
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.1.1.24
Syntax: INTEGER
Constraints:- 1: ieee802Dot16Of2001
- 2: ieee802Dot16cOf2002andPredcessors
- 3: ieee802Dot16aOf2003andPredcessors
- 4: ieee802Dot16Of2004
- 5: ieee802Dot16Of2004and16eOf2005
- 6: ieee802Dot16Of2004and16efOf2005
- 7: ieee802Dot16Of04and16efOf05and16gOf07
- 8: ieee802Dot16Of2008
Access: read-only
Status: current
- This parameter specifies the version of 802.16 to which the
message originator conforms.
wmanIf2BsSsManagementSupport
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.1.1.5
Syntax: INTEGER
Constraints:- 0: unmanagedSs
- 1: managedSs
Access: read-only
Status: current
- This object indicates whether or not the SS is managed.
wmanIf2BsSsPrimaryCid
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.1.1.3
Syntax: INTEGER
Constraints: 0..65535
Access: read-only
Status: current
- The value of this object indicates the primary CID of the
SS received from the RNG-RSP message.
wmanIf2BsSsSecondaryCid
Object ID: 1.3.1.4.1.32584.1.16.2.1.2.1.1.4
Syntax: INTEGER
Constraints: 0..65535
Access: read-only
Status: current
- The value of this object indicates the secondary
management CID present in the REG-RSP message. The value
should be null if the 2nd management connection is not
available.