MIB File
PMP 320 CPE

Module Information:

File:	Motorola-CPE-PRIVATE-MIB
Description:	PMP 320 CPE MIB tree
Organization:	Cambium Networks
Version:	Software Release e2.3
Contact Info:	PMP Technical Support email : support@cambiumnetworks.com

coldStart

Object ID: 1.3.6.1.4.1.10529.300.3.2.1

Syntax: Sequence (Structure)

coldStart

Access: SNMP Notification
Status: current

A coldStart trap signifies that the SNMP entity, supporting
a notification originator application, is reinitializing itself
and that its configuration may have been altered.

fatalErrorRestart

Object ID: 1.3.6.1.4.1.10529.300.3.2.3

Syntax: Sequence (Structure)

fatalErrorRestart

Access: SNMP Notification
Status: current

A fatalErrorRestart trap signifies that the SNMP entity, supporting
a notification originator application, is reinitializing itself
such that fatal error may have occured.

linkUp

Object ID: 1.3.6.1.4.1.10529.300.3.2.4

Syntax: Sequence (Structure)

linkUp

ifIndex

ifAdminStatus

ifOperStatus

Access: SNMP Notification
Status: current

A linkUp trap signifies that the SNMP entity, acting in an
agent role, has detected that the ifOperStatus object for one
of its communication links left the down state and transitioned
into some other state (but not into the notPresent state).
This other state is indicated by the included value of ifOperStatus.

notTheHightestPriorityAP

Object ID: 1.3.6.1.4.1.10529.300.3.2.5

Syntax: Sequence (Structure)

notTheHightestPriorityAP

Access: SNMP Notification
Status: current

When the AP preferred selection mode is enabled and the PMP320CPE synchronizes
to an AP that is not the highest priority AP in the BSID list, the CPE
shall send an SNMP trap after initial service flows and PMP320CPE
management IP connectivity are established.

warmStart

Object ID: 1.3.6.1.4.1.10529.300.3.2.2

Syntax: Sequence (Structure)

warmStart

Access: SNMP Notification
Status: current

A warmStart trap signifies that the SNMP entity, supporting
a notification originator application, is reinitializing itself
such that its configuration is unaltered.

adminEnable

Object ID: 1.3.6.1.4.1.10529.300.5.9

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

set/get WEB admin eabled/disabled

adminPassword

Object ID: 1.3.6.1.4.1.10529.300.5.8

Syntax: OCTET STRING
Constraints: SIZE (1..32)
Access: read-write
Status: current

set-only WEB admin password

adminUsername

Object ID: 1.3.6.1.4.1.10529.300.5.7

Syntax: OCTET STRING
Constraints: SIZE (1..32)
Access: read-write
Status: current

set/get WEB admin username

administratorEnable

Object ID: 1.3.6.1.4.1.10529.300.5.3

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

set/get WEB administrator eabled/disabled

administratorPassword

Object ID: 1.3.6.1.4.1.10529.300.5.2

Syntax: OCTET STRING
Constraints: SIZE (1..32)
Access: read-write
Status: current

set-only WEB administrator password

administratorUsername

Object ID: 1.3.6.1.4.1.10529.300.5.1

Syntax: OCTET STRING
Constraints: SIZE (1..32)
Access: read-write
Status: current

set/get WEB administrator username

autoSaveConfig

Object ID: 1.3.6.1.4.1.10529.300.2.3

Syntax: INTEGER
Constraints:

0: autoSaveDisabled

1: autoSaveEnabled

Access: read-write
Status: current

OID to enable/disable the system save to flash automatically.
Change setting will save configuraition immediately.
Set autoSaveConfig = 0 can save configuraition immediately and
don't turn on auto save.

autoSavePeriod

Object ID: 1.3.6.1.4.1.10529.300.2.4

Syntax: Gauge
Constraints: 0..4294967295
Access: read-write
Status: obsolete

The variable is deprecated.
An OID to set the auto save period in seconds.

eapIdentityString

Object ID: 1.3.6.1.4.1.10529.300.7.4

Syntax: OCTET STRING
Constraints: SIZE (0..64)
Access: read-write
Status: current

EAP-TLS/EAP-TTLS Identity String configuration

eapIdentityType

Object ID: 1.3.6.1.4.1.10529.300.7.2

Syntax: INTEGER
Constraints:

0: noIdentity

1: manaulIdentity

2: randomIdentity

Access: read-write
Status: current

EAP-TLS/EAP-TTLS Identity type
0: no Identity(Use realm)
1: manaul Identity
2: random Identity

eapIdentityUseRealm

Object ID: 1.3.6.1.4.1.10529.300.7.3

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

EAP-TLS/EAP-TTLS Identity use realm Enable/Disable

eapRealmString

Object ID: 1.3.6.1.4.1.10529.300.7.5

Syntax: OCTET STRING
Constraints: SIZE (0..32)
Access: read-write
Status: current

EAP-TLS/EAP-TTLS Identity String configuration

eapTlsPrivateKeyPassword

Object ID: 1.3.6.1.4.1.10529.300.7.8.1

Syntax: OCTET STRING
Constraints: SIZE (0..32)
Access: read-write
Status: current

EAP-TLS Private key password

eapTtlsPassword

Object ID: 1.3.6.1.4.1.10529.300.7.9.3

Syntax: OCTET STRING
Constraints: SIZE (0..32)
Access: read-write
Status: current

EAP-TTLS Password

eapTtlsPhase2

Object ID: 1.3.6.1.4.1.10529.300.7.9.1

Syntax: INTEGER
Constraints:

1: pap

2: chap

3: mschap

4: mschapV2

5: md5

Access: read-write
Status: current

EAP-TTLS Phase2(PAP/CHAP/MSCHAP/MSCHAPV2/MD5)

eapTtlsPrivateKeyPassword

Object ID: 1.3.6.1.4.1.10529.300.7.9.5

Syntax: OCTET STRING
Constraints: SIZE (0..32)
Access: read-write
Status: current

EAP-TTLS Private key password(the same as EAP-TLS).

eapTtlsUseDeviceCertificate

Object ID: 1.3.6.1.4.1.10529.300.7.9.4

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

EAP-TTLS Use device certificate(Disable/Enable)
It needs at least one user certificate file.
Please upload a user certificate file to CPE then you can set it enabled.

eapTtlsUsername

Object ID: 1.3.6.1.4.1.10529.300.7.9.2

Syntax: OCTET STRING
Constraints: SIZE (0..32)
Access: read-write
Status: current

EAP-TTLS Username

eapValidateTheDateDurationOfCaCertificate

Object ID: 1.3.6.1.4.1.10529.300.7.6

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

EAP-TLS/EAP-TTLS Validate the date duration of CA certificate(Disable/Enable)

eapValidateTheServerCertificate

Object ID: 1.3.6.1.4.1.10529.300.7.7

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

EAP-TLS/EAP-TTLS Validate the server certificate(Disable/Enable)
It needs at least one CA certificate file.
Please upload a CA certificate file to CPE then you can set it enabled.

gemtekDevCpeAPPreferredBsIdListLocked

Object ID: 1.3.6.1.4.1.10529.300.6.5.2

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

Configured BsId List Locked eabled/disabled

gemtekDevCpeAPPreferredPriorityFourBsId

Object ID: 1.3.6.1.4.1.10529.300.6.5.6

Syntax: OCTET STRING
Constraints: SIZE (0..17)
Access: read-write
Status: current

Priority 4 BsId Address

gemtekDevCpeAPPreferredPriorityOneBsId

Object ID: 1.3.6.1.4.1.10529.300.6.5.3

Syntax: OCTET STRING
Constraints: SIZE (0..17)
Access: read-write
Status: current

Priority 1 BsId Address

gemtekDevCpeAPPreferredPriorityThreeBsId

Object ID: 1.3.6.1.4.1.10529.300.6.5.5

Syntax: OCTET STRING
Constraints: SIZE (0..17)
Access: read-write
Status: current

Priority 3 BsId Address

gemtekDevCpeAPPreferredPriorityTwoBsId

Object ID: 1.3.6.1.4.1.10529.300.6.5.4

Syntax: OCTET STRING
Constraints: SIZE (0..17)
Access: read-write
Status: current

Priority 2 BsId Address

gemtekDevCpeAPPreferredSelectionEnable

Object ID: 1.3.6.1.4.1.10529.300.6.5.1

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

AP Preferred Selection eabled/disabled

gemtekDevCpeAllowPacketType

Object ID: 1.3.6.1.4.1.10529.300.8.2.8.2.3

Syntax: INTEGER
Constraints:

0: all

1: taggedOnly

2: untaggedOnly

Access: read-write
Status: current

Data VLN allow packet type

gemtekDevCpeAllowTelnetAccessingFromWan

Object ID: 1.3.6.1.4.1.10529.300.9.2

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

Allow Telnet Accessing From WAN(disable/enable)

gemtekDevCpeAllowWebAccessingFromWan

Object ID: 1.3.6.1.4.1.10529.300.9.1

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

Allow Web Accessing From WAN(disable/enable)

gemtekDevCpeAuthenticationSelectionPhase1

Object ID: 1.3.6.1.4.1.10529.300.7.1

Syntax: INTEGER
Constraints:

0: none

1: eapTtls

2: eapTls

Access: read-write
Status: current

Authentication Selection Phase1(None/EAP-TLS/EAP-TTLS)
EAP-TLS needs at least one Device certificate file.
Please upload a device certificate file to CPE then you can set EAP-TLS.

gemtekDevCpeAutoFirmwareRollback

Object ID: 1.3.6.1.4.1.10529.300.2.11

Syntax: INTEGER
Constraints:

0: disabled

1: levelOne

2: levelTwo

Access: read-write
Status: current

Auto firmware rollback Disable/Level 1/Level 2.(default:Disable)

gemtekDevCpeBootromCreationDate

Object ID: 1.3.6.1.4.1.10529.300.1.3.11

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Bootrom Creation Date

gemtekDevCpeBootromVersion

Object ID: 1.3.6.1.4.1.10529.300.1.3.10

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Bootrom Version of CPE

gemtekDevCpeBridgeDhcpLeaseTime

Object ID: 1.3.6.1.4.1.10529.300.8.2.5

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

Bridge Mode DHCP IP Lease time(sec).

gemtekDevCpeBridgeDhcpRebindTime

Object ID: 1.3.6.1.4.1.10529.300.8.2.7

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

Bridge Mode DHCP IP Rebind time(sec).

gemtekDevCpeBridgeDhcpRenewalTime

Object ID: 1.3.6.1.4.1.10529.300.8.2.6

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

Bridge Mode DHCP IP Renewal time(sec).

gemtekDevCpeBridgeGateway

Object ID: 1.3.6.1.4.1.10529.300.8.2.4

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

Bridge Mode Static IP Gateway

gemtekDevCpeBridgeIpAddress

Object ID: 1.3.6.1.4.1.10529.300.8.2.2

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

Bridge Mode Static IP Address configuration

gemtekDevCpeBridgeIpType

Object ID: 1.3.6.1.4.1.10529.300.8.2.1

Syntax: INTEGER
Constraints:

0: static

1: dhcp

Access: read-write
Status: current

Bridge IP Type(Static/DHCP)

gemtekDevCpeBridgeNetmask

Object ID: 1.3.6.1.4.1.10529.300.8.2.3

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

Bridge Mode Static Netmask configuration

gemtekDevCpeCACertificateFileDelete

Object ID: 1.3.6.1.4.1.10529.300.7.10.2

Syntax: INTEGER
Constraints:

1: fileOne

2: fileTwo

Access: read-write
Status: current

delete the CA certificate file.
Validate the server certificate needs at least one CA certificate file.
If you delete all CA certificate files,
it will change eapValidateTheServerCertificate to disabled.

gemtekDevCpeCACertificateFileEntry

Object ID: 1.3.6.1.4.1.10529.300.7.10.4.1

Syntax: Sequence (Structure)

gemtekDevCpeCACertificateIndex

gemtekDevCpeCACertificateSize

gemtekDevCpeCACertificateIssuer

gemtekDevCpeCAValidityDateBegin

gemtekDevCpeCAValidityDateEnd

gemtekDevCpeCACertificateSubject

Access: not-accessible
Status: current

CA certificate file entry

gemtekDevCpeCACertificateFileName

Object ID: 1.3.6.1.4.1.10529.300.7.10.1.1

Syntax: OCTET STRING
Constraints: SIZE (1..32)
Access: read-write
Status: current

specify the CA certificate file name on the FTP server.

gemtekDevCpeCACertificateFileTable

Object ID: 1.3.6.1.4.1.10529.300.7.10.4

Syntax: Sequence of Type (Array)

GemtekDevCpeCACertificateFileEntry

Access: not-accessible
Status: current

CA certificate file table

gemtekDevCpeCACertificateFileUpload

Object ID: 1.3.6.1.4.1.10529.300.7.10.1.2

Syntax: INTEGER
Constraints:

0: default

1: upload

Access: read-write
Status: current

check and upload the CA certificate file.

gemtekDevCpeCACertificateIndex

Object ID: 1.3.6.1.4.1.10529.300.7.10.4.1.1

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current

CA certificate file Table Index

gemtekDevCpeCACertificateIssuer

Object ID: 1.3.6.1.4.1.10529.300.7.10.4.1.3

Syntax: OCTET STRING
Constraints: SIZE (0..256)
Access: read-only
Status: current

CA certificate file issuer

gemtekDevCpeCACertificateSize

Object ID: 1.3.6.1.4.1.10529.300.7.10.4.1.2

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

CA certificate file size(Byte)

gemtekDevCpeCACertificateSubject

Object ID: 1.3.6.1.4.1.10529.300.7.10.4.1.6

Syntax: OCTET STRING
Constraints: SIZE (0..256)
Access: read-only
Status: current

CA certificate file subject

gemtekDevCpeCAValidityDateBegin

Object ID: 1.3.6.1.4.1.10529.300.7.10.4.1.4

Syntax: OCTET STRING
Constraints: SIZE (0..32)
Access: read-only
Status: current

CA certificate file validity date begin

gemtekDevCpeCAValidityDateEnd

Object ID: 1.3.6.1.4.1.10529.300.7.10.4.1.5

Syntax: OCTET STRING
Constraints: SIZE (0..32)
Access: read-only
Status: current

CA certificate file validity date end

gemtekDevCpeChannelActive

Object ID: 1.3.6.1.4.1.10529.300.6.3.1.2

Syntax: INTEGER
Constraints:

0: disactive

1: active

Access: read-only
Status: current

Channel Active/Disactive

gemtekDevCpeChannelApplyLoadOrSave

Object ID: 1.3.6.1.4.1.10529.300.6.2

Syntax: INTEGER
Constraints:

0: load

1: save

Access: read-write
Status: current

Channel Scanner Setting load or save (defualut:0).
Saved channel Table will take effect until reboot.

gemtekDevCpeChannelBandwidth

Object ID: 1.3.6.1.4.1.10529.300.6.3.1.4

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-create
Status: current

Channel Bandwidth configuration(kHz)
3.5MHz = 3500kHz
5MHz = 5000kHz
7MHz = 7000kHz
10MHz = 10000kHz

gemtekDevCpeChannelBandwidthRang

Object ID: 1.3.6.1.4.1.10529.300.6.1

Syntax: INTEGER
Constraints:

0: threeToFive

1: sixToTen

Access: read-write
Status: deprecated

No function for this OID since f03b00-5.8.8Moto
Select the Channel Bandwidth Rang.
0: threeToFive 3MHz ~ 5MHz => 3MHz, 3.5MHz, 5MHz
1: sixToTen 6MHz ~ 10MHz => 6MHz, 7MHz, 8.75MHz, 10MHz

gemtekDevCpeChannelBsId

Object ID: 1.3.6.1.4.1.10529.300.6.3.1.9

Syntax: OCTET STRING
Constraints: SIZE (0..18)
Access: read-only
Status: current

Channel Bs Id

gemtekDevCpeChannelCinr

Object ID: 1.3.6.1.4.1.10529.300.6.3.1.6

Syntax: OCTET STRING
Constraints: SIZE (0..32)
Access: read-only
Status: current

Channel CINR(dB)

gemtekDevCpeChannelEntry

Object ID: 1.3.6.1.4.1.10529.300.6.3.1

Syntax: Sequence (Structure)

gemtekDevCpeChannelIndex

gemtekDevCpeChannelActive

gemtekDevCpeChannelFrequency

gemtekDevCpeChannelBandwidth

gemtekDevCpeChannelRssi

gemtekDevCpeChannelCinr

gemtekDevCpeChannelEntryEnable

gemtekDevCpeChannelRowstatus

gemtekDevCpeChannelBsId

gemtekDevCpeChannelPreambelIndex

Access: not-accessible
Status: current

Channel Entry

gemtekDevCpeChannelEntryEnable

Object ID: 1.3.6.1.4.1.10529.300.6.3.1.7

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-create
Status: current

Channel Entry Enable(Disable/Enable)

gemtekDevCpeChannelFrequency

Object ID: 1.3.6.1.4.1.10529.300.6.3.1.3

Syntax: Gauge
Constraints: 0..4294967295
Access: read-create
Status: current

Channel Frequency configuration (kHz)

gemtekDevCpeChannelIndex

Object ID: 1.3.6.1.4.1.10529.300.6.3.1.1

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current

Channel Index

gemtekDevCpeChannelPreambelIndex

Object ID: 1.3.6.1.4.1.10529.300.6.3.1.10

Syntax: OCTET STRING
Constraints: SIZE (0..4)
Access: read-only
Status: current

Channel Preamble Index

gemtekDevCpeChannelRowstatus

Object ID: 1.3.6.1.4.1.10529.300.6.3.1.8

Syntax: INTEGER
Constraints:

1: active

2: notInService

3: notReady

4: createAndGo

5: createAndWait

6: destroy

Access: read-create
Status: current

active(1) to active the row and save setting to memory.
createAndWait(5) to create a row in the bottom.
destroy(6) to delete a row.

gemtekDevCpeChannelRssi

Object ID: 1.3.6.1.4.1.10529.300.6.3.1.5

Syntax: OCTET STRING
Constraints: SIZE (0..32)
Access: read-only
Status: current

Channel RSSI (dBm)

gemtekDevCpeChannelTable

Object ID: 1.3.6.1.4.1.10529.300.6.3

Syntax: Sequence of Type (Array)

GemtekDevCpeChannelEntry

Access: not-accessible
Status: current

Channel Table

gemtekDevCpeCurrentSwVersion

Object ID: 1.3.6.1.4.1.10529.300.22.1

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

This value identifies the version of software currently running in the CPE

gemtekDevCpeDataVlanEnalbe

Object ID: 1.3.6.1.4.1.10529.300.8.2.8.2.1

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

Data VLAN (Enabled/Disabled)

gemtekDevCpeDataVlanVid

Object ID: 1.3.6.1.4.1.10529.300.8.2.8.2.2

Syntax: Gauge
Constraints: 0..4294967295
Access: read-write
Status: current

Setting Data VLAN VID(0~4095).

gemtekDevCpeDaylightSaving

Object ID: 1.3.6.1.4.1.10529.300.4.6

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

Daylight Saving Enable configuration

gemtekDevCpeDhcpClentListEntry

Object ID: 1.3.6.1.4.1.10529.300.8.3.12.1.1

Syntax: Sequence (Structure)

gemtekDevCpeDhcpClentListIndex

gemtekDevCpeDhcpClentListIp

gemtekDevCpeDhcpClentListMacAddress

gemtekDevCpeDhcpClentListExpireTime

Access: not-accessible
Status: current

gemtekDevCpeDhcpClentListEntry

gemtekDevCpeDhcpClentListExpireTime

Object ID: 1.3.6.1.4.1.10529.300.8.3.12.1.1.4

Syntax: OCTET STRING
Access: read-only
Status: current

DHCP Clent List: Expire Time

gemtekDevCpeDhcpClentListIndex

Object ID: 1.3.6.1.4.1.10529.300.8.3.12.1.1.1

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current

DHCP Clent List Index

gemtekDevCpeDhcpClentListIp

Object ID: 1.3.6.1.4.1.10529.300.8.3.12.1.1.2

Syntax: STRING
Constraints: SIZE (4)
Access: read-only
Status: current

DHCP Clent List: IP Address

gemtekDevCpeDhcpClentListMacAddress

Object ID: 1.3.6.1.4.1.10529.300.8.3.12.1.1.3

Syntax: OCTET STRING
Constraints: SIZE (0..18)
Access: read-only
Status: current

DHCP Clent List: MAC Address

gemtekDevCpeDhcpClentListTable

Object ID: 1.3.6.1.4.1.10529.300.8.3.12.1

Syntax: Sequence of Type (Array)

GemtekDevCpeDhcpClentListEntry

Access: not-accessible
Status: current

gemtekDevCpeDhcpClentListTable

gemtekDevCpeDhcpServerDomainName

Object ID: 1.3.6.1.4.1.10529.300.8.3.9.10

Syntax: OCTET STRING
Constraints: SIZE (0..64)
Access: read-write
Status: current

DHCP Server Domain Name

gemtekDevCpeDhcpServerEnable

Object ID: 1.3.6.1.4.1.10529.300.8.3.9.1

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

DHCP Server Enable/Disable

gemtekDevCpeDhcpServerEndIp

Object ID: 1.3.6.1.4.1.10529.300.8.3.9.3

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

DHCP Server End IP

gemtekDevCpeDhcpServerMaxLeaseTime

Object ID: 1.3.6.1.4.1.10529.300.8.3.9.11

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-write
Status: current

DHCP Server MAX Lease Time

gemtekDevCpeDhcpServerPermanentHostEntry

Object ID: 1.3.6.1.4.1.10529.300.8.3.9.12.1

Syntax: Sequence (Structure)

gemtekDevCpeDhcpServerPermanentHostIndex

gemtekDevCpeDhcpServerPermanentHostMac

gemtekDevCpeDhcpServerPermanentHostIp

gemtekDevCpeDhcpServerPermanentHostEntryEnable

gemtekDevCpeDhcpServerPermanentRowstatus

Access: not-accessible
Status: current

DHCP Server Permanent Host Entry

gemtekDevCpeDhcpServerPermanentHostEntryEnable

Object ID: 1.3.6.1.4.1.10529.300.8.3.9.12.1.4

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-create
Status: current

DHCP Server Permanent Host Entry Enable/Disable

gemtekDevCpeDhcpServerPermanentHostIndex

Object ID: 1.3.6.1.4.1.10529.300.8.3.9.12.1.1

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current

DHCP Server Permanent Host Index

gemtekDevCpeDhcpServerPermanentHostIp

Object ID: 1.3.6.1.4.1.10529.300.8.3.9.12.1.3

Syntax: STRING
Constraints: SIZE (4)
Access: read-create
Status: current

DHCP Server Permanent Host IP

gemtekDevCpeDhcpServerPermanentHostMac

Object ID: 1.3.6.1.4.1.10529.300.8.3.9.12.1.2

Syntax: OCTET STRING
Constraints: SIZE (0..18)
Access: read-create
Status: current

DHCP Server Permanent Host MAC

gemtekDevCpeDhcpServerPermanentHostTable

Object ID: 1.3.6.1.4.1.10529.300.8.3.9.12

Syntax: Sequence of Type (Array)

GemtekDevCpeDhcpServerPermanentHostEntry

Access: not-accessible
Status: current

DHCP Server Permanent Host Table

gemtekDevCpeDhcpServerPermanentRowstatus

Object ID: 1.3.6.1.4.1.10529.300.8.3.9.12.1.5

Syntax: INTEGER
Constraints:

1: active

2: notInService

3: notReady

4: createAndGo

5: createAndWait

6: destroy

Access: read-create
Status: current

active(1) to active the row and save setting to memory.
createAndWait(5) to create a row in the bottom.
destroy(6) to delete a row.

gemtekDevCpeDhcpServerPrimaryDnsFromIsp

Object ID: 1.3.6.1.4.1.10529.300.8.3.9.5

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

DHCP Server Primary DNS From ISP Enable/Disable

gemtekDevCpeDhcpServerPrimaryDnsIp

Object ID: 1.3.6.1.4.1.10529.300.8.3.9.4

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

DHCP Server Primary DNS IP Address configuration

gemtekDevCpeDhcpServerSecondDnsFromIsp

Object ID: 1.3.6.1.4.1.10529.300.8.3.9.7

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

DHCP Server Second DNS From ISP Enable/Disable

gemtekDevCpeDhcpServerSecondDnsIp

Object ID: 1.3.6.1.4.1.10529.300.8.3.9.6

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

DHCP Server Second DNS IP Address configuration

gemtekDevCpeDhcpServerStartIp

Object ID: 1.3.6.1.4.1.10529.300.8.3.9.2

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

DHCP Server Start IP

gemtekDevCpeDhcpServerTertiaryDnsFromIsp

Object ID: 1.3.6.1.4.1.10529.300.8.3.9.9

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

DHCP Server Tertiary DNS From ISP Enable/Disable

gemtekDevCpeDhcpServerTertiaryDnsIp

Object ID: 1.3.6.1.4.1.10529.300.8.3.9.8

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

DHCP Server Tertiary DNS IP Address configuration

gemtekDevCpeDmzEnable

Object ID: 1.3.6.1.4.1.10529.300.9.3

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

DMZ Enable/Disable

gemtekDevCpeDmzIpAddress

Object ID: 1.3.6.1.4.1.10529.300.9.4

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

DMZ IP Address

gemtekDevCpeDownloadSwVersion

Object ID: 1.3.6.1.4.1.10529.300.22.3

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

This value identifies the version of software to download

gemtekDevCpeDropDataPacket

Object ID: 1.3.6.1.4.1.10529.300.8.3.13.2

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

Drop data packet if its dscp is the same as mgmt Enabled/Disabled(default:Disabled)

gemtekDevCpeDscpToVpMapping

Object ID: 1.3.6.1.4.1.10529.300.8.2.8.4.1

Syntax: OCTET STRING
Constraints: SIZE (0..64)
Access: read-write
Status: current

DSCP To VP Mapping, CP00~CP63,CP00=0,CP48=6,CP56=7.

gemtekDevCpeDynamicMaxTxPowerBpsk

Object ID: 1.3.6.1.4.1.10529.300.2.15

Syntax: OCTET STRING
Constraints: SIZE (0..32)
Access: read-only
Status: current

BPSK Dynamic Max Tx Power(dBm)

gemtekDevCpeDynamicMaxTxPowerQam16

Object ID: 1.3.6.1.4.1.10529.300.2.17

Syntax: OCTET STRING
Constraints: SIZE (0..32)
Access: read-only
Status: current

QAM16 Dynamic Max Tx Power(dBm)

gemtekDevCpeDynamicMaxTxPowerQam64

Object ID: 1.3.6.1.4.1.10529.300.2.18

Syntax: OCTET STRING
Constraints: SIZE (0..32)
Access: read-only
Status: current

QAM64 Dynamic Max Tx Power(dBm)

gemtekDevCpeDynamicMaxTxPowerQpsk

Object ID: 1.3.6.1.4.1.10529.300.2.16

Syntax: OCTET STRING
Constraints: SIZE (0..32)
Access: read-only
Status: current

QPSK Dynamic Max Tx Power(dBm)

gemtekDevCpeEirpModeAntennaGain

Object ID: 1.3.6.1.4.1.10529.300.13.3.1

Syntax: Gauge
Constraints: 0..4294967295
Access: read-write
Status: obsolete

The variable is deprecated.
EIRP Mode Antenna Gain(0~2450)

gemtekDevCpeEirpModeBPSK

Object ID: 1.3.6.1.4.1.10529.300.13.3.2

Syntax: Gauge
Constraints: 0..4294967295
Access: read-write
Status: obsolete

The variable is deprecated.
EIRP Mode BPSK Setting(0~2750)

gemtekDevCpeEirpModeQAM16

Object ID: 1.3.6.1.4.1.10529.300.13.3.4

Syntax: Gauge
Constraints: 0..4294967295
Access: read-write
Status: obsolete

The variable is deprecated.
EIRP Mode QAM16 Setting(0~2750)

gemtekDevCpeEirpModeQAM64

Object ID: 1.3.6.1.4.1.10529.300.13.3.5

Syntax: Gauge
Constraints: 0..4294967295
Access: read-write
Status: obsolete

The variable is deprecated.
EIRP Mode QAM64 Setting(0~2450)

gemtekDevCpeEirpModeQPSK

Object ID: 1.3.6.1.4.1.10529.300.13.3.3

Syntax: Gauge
Constraints: 0..4294967295
Access: read-write
Status: obsolete

The variable is deprecated.
EIRP Mode QPSK Setting(0~2750)

gemtekDevCpeFirewallAction

Object ID: 1.3.6.1.4.1.10529.300.9.7.1.3

Syntax: INTEGER
Constraints:

0: deny

1: allow

Access: read-create
Status: current

Firewall Action(Deny/Allow)

gemtekDevCpeFirewallDstIpAddress

Object ID: 1.3.6.1.4.1.10529.300.9.7.1.11

Syntax: STRING
Constraints: SIZE (4)
Access: read-create
Status: current

Firewall Destination IP Address

gemtekDevCpeFirewallDstMac

Object ID: 1.3.6.1.4.1.10529.300.9.7.1.9

Syntax: OCTET STRING
Constraints: SIZE (0..17)
Access: read-create
Status: current

Firewall Destination MAC Address

gemtekDevCpeFirewallDstPortRangeBegin

Object ID: 1.3.6.1.4.1.10529.300.9.7.1.14

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-create
Status: current

Firewall Destination Port Range Begin(1~65535)

gemtekDevCpeFirewallDstPortRangeEnd

Object ID: 1.3.6.1.4.1.10529.300.9.7.1.15

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-create
Status: current

Firewall Destination Port Range End(1~65535)

gemtekDevCpeFirewallEnable

Object ID: 1.3.6.1.4.1.10529.300.9.6

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

Firewall Enable/Disable

gemtekDevCpeFirewallEntry

Object ID: 1.3.6.1.4.1.10529.300.9.7.1

Syntax: Sequence (Structure)

gemtekDevCpeFirewallIndex

gemtekDevCpeFirewallName

gemtekDevCpeFirewallAction

gemtekDevCpeFirewallInterface

gemtekDevCpeFirewallProtocol

gemtekDevCpeFirewallPriority

gemtekDevCpeFirewallEntryEnable

gemtekDevCpeFirewallSrcMac

gemtekDevCpeFirewallDstMac

gemtekDevCpeFirewallSrcIpAddress

gemtekDevCpeFirewallDstIpAddress

gemtekDevCpeFirewallSrcPortRangeBegin

gemtekDevCpeFirewallSrcPortRangeEnd

gemtekDevCpeFirewallDstPortRangeBegin

gemtekDevCpeFirewallDstPortRangeEnd

gemtekDevCpeFirewallRowstatus

Access: not-accessible
Status: current

Firewall Entry

gemtekDevCpeFirewallEntryEnable

Object ID: 1.3.6.1.4.1.10529.300.9.7.1.7

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-create
Status: current

Firewall Entry Enable/Disable

gemtekDevCpeFirewallEtherTypeFilterFiveEnable

Object ID: 1.3.6.1.4.1.10529.300.9.17

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

Firewall Ether-Type Filter Group Five Enable/Disable

gemtekDevCpeFirewallEtherTypeFilterFiveTypeDeny

Object ID: 1.3.6.1.4.1.10529.300.9.18

Syntax: OCTET STRING
Constraints: SIZE (0..4)
Access: read-write
Status: current

Firewall Ether-Type Filter Group Five Type Deny

gemtekDevCpeFirewallEtherTypeFilterFourEnable

Object ID: 1.3.6.1.4.1.10529.300.9.15

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

Firewall Ether-Type Filter Group Four Enable/Disable

gemtekDevCpeFirewallEtherTypeFilterFourTypeDeny

Object ID: 1.3.6.1.4.1.10529.300.9.16

Syntax: OCTET STRING
Constraints: SIZE (0..4)
Access: read-write
Status: current

Firewall Ether-Type Filter Group Four Type Deny

gemtekDevCpeFirewallEtherTypeFilterOneEnable

Object ID: 1.3.6.1.4.1.10529.300.9.9

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

Firewall Ether-Type Filter Group One Enable/Disable

gemtekDevCpeFirewallEtherTypeFilterOneTypeDeny

Object ID: 1.3.6.1.4.1.10529.300.9.10

Syntax: OCTET STRING
Constraints: SIZE (0..4)
Access: read-write
Status: current

Firewall Ether-Type Filter Group One Type Deny

gemtekDevCpeFirewallEtherTypeFilterThreeEnable

Object ID: 1.3.6.1.4.1.10529.300.9.13

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

Firewall Ether-Type Filter Group Three Enable/Disable

gemtekDevCpeFirewallEtherTypeFilterThreeTypeDeny

Object ID: 1.3.6.1.4.1.10529.300.9.14

Syntax: OCTET STRING
Constraints: SIZE (0..4)
Access: read-write
Status: current

Firewall Ether-Type Filter Group Three Type Deny

gemtekDevCpeFirewallEtherTypeFilterTwoEnable

Object ID: 1.3.6.1.4.1.10529.300.9.11

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

Firewall Ether-Type Filter Group Two Enable/Disable

gemtekDevCpeFirewallEtherTypeFilterTwoTypeDeny

Object ID: 1.3.6.1.4.1.10529.300.9.12

Syntax: OCTET STRING
Constraints: SIZE (0..4)
Access: read-write
Status: current

Firewall Ether-Type Filter Group Two Type Deny

gemtekDevCpeFirewallIndex

Object ID: 1.3.6.1.4.1.10529.300.9.7.1.1

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current

Firewall Index

gemtekDevCpeFirewallInterface

Object ID: 1.3.6.1.4.1.10529.300.9.7.1.4

Syntax: INTEGER
Constraints:

0: ethernet

1: wimax

Access: read-create
Status: current

Firewall Interface(Ethernet/Wimax)

gemtekDevCpeFirewallName

Object ID: 1.3.6.1.4.1.10529.300.9.7.1.2

Syntax: OCTET STRING
Access: read-create
Status: current

Firewall Name

gemtekDevCpeFirewallPPPoEEnable

Object ID: 1.3.6.1.4.1.10529.300.9.19

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

PPPoE Enable/Disable
(Only allow PPPoE traffic pass through)

gemtekDevCpeFirewallPriority

Object ID: 1.3.6.1.4.1.10529.300.9.7.1.6

Syntax: INTEGER
Constraints:

1: hi

10: lo

2: two

3: three

4: four

5: five

6: six

7: seven

8: eight

9: nine

Access: read-create
Status: current

Firewall Entry Priority

gemtekDevCpeFirewallProtocol

Object ID: 1.3.6.1.4.1.10529.300.9.7.1.5

Syntax: INTEGER
Constraints:

0: any

1: icmp

17: udp

6: tcp

Access: read-create
Status: current

Firewall Protocol

gemtekDevCpeFirewallRowstatus

Object ID: 1.3.6.1.4.1.10529.300.9.7.1.16

Syntax: INTEGER
Constraints:

1: active

2: notInService

3: notReady

4: createAndGo

5: createAndWait

6: destroy

Access: read-create
Status: current

active(1) to active the row and save setting to memory.
createAndWait(5) to create a row in the bottom.
destroy(6) to delete a row.

gemtekDevCpeFirewallSrcIpAddress

Object ID: 1.3.6.1.4.1.10529.300.9.7.1.10

Syntax: STRING
Constraints: SIZE (4)
Access: read-create
Status: current

Firewall Source IP Address

gemtekDevCpeFirewallSrcMac

Object ID: 1.3.6.1.4.1.10529.300.9.7.1.8

Syntax: OCTET STRING
Constraints: SIZE (0..17)
Access: read-create
Status: current

Firewall Source MAC Address

gemtekDevCpeFirewallSrcPortRangeBegin

Object ID: 1.3.6.1.4.1.10529.300.9.7.1.12

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-create
Status: current

Firewall Source Port Range Begin(1~65535)

gemtekDevCpeFirewallSrcPortRangeEnd

Object ID: 1.3.6.1.4.1.10529.300.9.7.1.13

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-create
Status: current

Firewall Source Port Range End(1~65535)

gemtekDevCpeFirewallTable

Object ID: 1.3.6.1.4.1.10529.300.9.7

Syntax: Sequence of Type (Array)

GemtekDevCpeFirewallEntry

Access: not-accessible
Status: current

Firewall Table

gemtekDevCpeFirmwareCreationDate

Object ID: 1.3.6.1.4.1.10529.300.1.3.3

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Firmware Creation Date

gemtekDevCpeFirmwareValidationCount

Object ID: 1.3.6.1.4.1.10529.300.2.13

Syntax: Gauge
Constraints: 0..4294967295
Access: read-write
Status: current

Auto firmware rollback Level 2: Failure count in firmware validation test(0~999).

gemtekDevCpeFirmwareValidationTime

Object ID: 1.3.6.1.4.1.10529.300.2.12

Syntax: Gauge
Constraints: 0..4294967295
Access: read-write
Status: current

Auto firmware rollback Level 1: The duration of firmware validation test time(0~99999 seconds).

gemtekDevCpeFirmwareVersion

Object ID: 1.3.6.1.4.1.10529.300.1.3.2

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Firmware Version of CPE

gemtekDevCpeFrequencyRange

Object ID: 1.3.6.1.4.1.10529.300.1.3.4

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Frequency Range of CPE

gemtekDevCpeHardwareModel

Object ID: 1.3.6.1.4.1.10529.300.1.3.1

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Hardware Model of CPE

gemtekDevCpeHeight

Object ID: 1.3.6.1.4.1.10529.300.1.3.8

Syntax: OCTET STRING
Constraints: SIZE (0..16)
Access: read-write
Status: current

CPE Height Report

gemtekDevCpeLanMacAddresss

Object ID: 1.3.6.1.4.1.10529.300.1.2.1

Syntax: OCTET STRING
Constraints: SIZE (0..18)
Access: read-only
Status: current

CPE LAN MAC Address

gemtekDevCpeLanTotalDownLinkDataByte

Object ID: 1.3.6.1.4.1.10529.300.1.2.2

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

Total Down Link Data Bytes Report(Bytes)

gemtekDevCpeLanTotalDownLinkDataPackets

Object ID: 1.3.6.1.4.1.10529.300.1.2.4

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

LAN Total Down Link Data Packets Report(Packets)

gemtekDevCpeLanTotalUpLinkDataByte

Object ID: 1.3.6.1.4.1.10529.300.1.2.3

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

Total Up Link Data Bytes Report(Bytes)

gemtekDevCpeLanTotalUpLinkDataPackets

Object ID: 1.3.6.1.4.1.10529.300.1.2.5

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

LAN Total Up Link Data Packets Report(Packets)

gemtekDevCpeLatitude

Object ID: 1.3.6.1.4.1.10529.300.1.3.6

Syntax: OCTET STRING
Constraints: SIZE (0..16)
Access: read-write
Status: current

CPE Latitude Report

gemtekDevCpeLockFrequencyRange

Object ID: 1.3.6.1.4.1.10529.300.6.4.3

Syntax: INTEGER
Constraints:

0: unlock

1: lock

Access: read-only
Status: current

Lock/Unlock frequency range state.

gemtekDevCpeLockFrequencyRangeMax

Object ID: 1.3.6.1.4.1.10529.300.6.4.2

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

CPE lock frequency range Max(kHz)

gemtekDevCpeLockFrequencyRangeMin

Object ID: 1.3.6.1.4.1.10529.300.6.4.1

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

CPE lock frequency range Min(kHz)

gemtekDevCpeLongitude

Object ID: 1.3.6.1.4.1.10529.300.1.3.7

Syntax: OCTET STRING
Constraints: SIZE (0..16)
Access: read-write
Status: current

CPE Longitude Report

gemtekDevCpeMaxTxPowerModeSelection

Object ID: 1.3.6.1.4.1.10529.300.13.1

Syntax: INTEGER
Constraints:

0: rf

1: eirp

Access: read-write
Status: obsolete

The variable is deprecated.
Max Tx Power Mode Selection (RF Mode/EIRP Mode)

gemtekDevCpeMgmtDscpId

Object ID: 1.3.6.1.4.1.10529.300.8.3.13.1

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-write
Status: current

MGMT DSCP ID(range:0~63, default:0)

gemtekDevCpeMgmtVlanEnalbe

Object ID: 1.3.6.1.4.1.10529.300.8.2.8.1.1

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

Management VLAN (Enabled/Disabled)

gemtekDevCpeMgmtVlanVid

Object ID: 1.3.6.1.4.1.10529.300.8.2.8.1.2

Syntax: Gauge
Constraints: 0..4294967295
Access: read-write
Status: current

Setting Management VLAN VID(0~4095).

gemtekDevCpeMgmtVlanVp

Object ID: 1.3.6.1.4.1.10529.300.8.2.8.1.3

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

Management VLAN VP.

gemtekDevCpeMibsVersion

Object ID: 1.3.6.1.4.1.10529.300.1.3.9

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

MIBs Version of CPE

gemtekDevCpeModelFrequencyRangeMax

Object ID: 1.3.6.1.4.1.10529.300.6.4.5

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

CPE Model frequency range Max(kHz)

gemtekDevCpeModelFrequencyRangeMin

Object ID: 1.3.6.1.4.1.10529.300.6.4.4

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

CPE model frequency range Min(kHz)

gemtekDevCpeNatLanIpAddress

Object ID: 1.3.6.1.4.1.10529.300.8.3.6

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

NAT LAN IP Address configuration

gemtekDevCpeNatLanIpType

Object ID: 1.3.6.1.4.1.10529.300.8.3.5

Syntax: INTEGER
Constraints:

0: static

1: dhcp

Access: read-only
Status: current

NAT LAN IP Type(Static/DHCP)

gemtekDevCpeNatLanNetmask

Object ID: 1.3.6.1.4.1.10529.300.8.3.7

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

NAT LAN Netmask configuration

gemtekDevCpeNatModeDataVlanEnalbe

Object ID: 1.3.6.1.4.1.10529.300.8.3.17.2.1

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

[Nat Mode] Data VLAN (Enabled/Disabled)

gemtekDevCpeNatModeDataVlanVid

Object ID: 1.3.6.1.4.1.10529.300.8.3.17.2.2

Syntax: Gauge
Constraints: 0..4294967295
Access: read-write
Status: current

[Nat Mode] Setting Data VLAN VID(1~4095).

gemtekDevCpeNatModeDataVlanVp

Object ID: 1.3.6.1.4.1.10529.300.8.3.17.2.3

Syntax: Gauge
Constraints: 0..4294967295
Access: read-write
Status: current

[Nat Mode] Setting Data VLAN VP(0~7).

gemtekDevCpeNatModeMgmtVlanEnalbe

Object ID: 1.3.6.1.4.1.10529.300.8.3.17.1.1

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

[Nat Mode] Management VLAN (Enabled/Disabled)

gemtekDevCpeNatModeMgmtVlanVid

Object ID: 1.3.6.1.4.1.10529.300.8.3.17.1.2

Syntax: Gauge
Constraints: 0..4294967295
Access: read-write
Status: current

[Nat Mode] Setting Management VLAN VID(1~4095).

gemtekDevCpeNatModeMgmtVlanVp

Object ID: 1.3.6.1.4.1.10529.300.8.3.17.1.3

Syntax: Gauge
Constraints: 0..4294967295
Access: read-write
Status: current

[Nat Mode] Setting Management VLAN VP(0~7).

gemtekDevCpeNatMtu

Object ID: 1.3.6.1.4.1.10529.300.8.3.8

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-write
Status: current

NAT Ethernet MTU size(Default:1476)

gemtekDevCpeNatWanDhcpLeaseTime

Object ID: 1.3.6.1.4.1.10529.300.8.3.14

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

NAT Mode DHCP IP Lease time(sec).

gemtekDevCpeNatWanDhcpRebindTime

Object ID: 1.3.6.1.4.1.10529.300.8.3.16

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

NAT Mode DHCP IP Rebind time(sec).

gemtekDevCpeNatWanDhcpRenewalTime

Object ID: 1.3.6.1.4.1.10529.300.8.3.15

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

NAT Mode DHCP IP Renewal time(sec).

gemtekDevCpeNatWanGateway

Object ID: 1.3.6.1.4.1.10529.300.8.3.4

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

NAT Static WAN Gateway configuration

gemtekDevCpeNatWanIpAddress

Object ID: 1.3.6.1.4.1.10529.300.8.3.2

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

NAT Static WAN IP Address configuration

gemtekDevCpeNatWanIpType

Object ID: 1.3.6.1.4.1.10529.300.8.3.1

Syntax: INTEGER
Constraints:

0: static

1: dhcp

Access: read-write
Status: current

NAT WAN IP Type(Static/DHCP)

gemtekDevCpeNatWanNetmask

Object ID: 1.3.6.1.4.1.10529.300.8.3.3

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

NAT Static WAN Netmask configuration

gemtekDevCpeNetoworkOperatingMode

Object ID: 1.3.6.1.4.1.10529.300.8.1

Syntax: INTEGER
Constraints:

0: nat

1: bridge

Access: read-write
Status: current

Netowork Operating Mode(Bridge/NAT)

gemtekDevCpeNonmemberPkts

Object ID: 1.3.6.1.4.1.10529.300.8.2.8.5.5

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

CPE Non-member packets.

gemtekDevCpeNonmemberPktsReset

Object ID: 1.3.6.1.4.1.10529.300.8.2.8.5.6

Syntax: INTEGER
Constraints:

0: default

1: reset

Access: read-write
Status: current

Reset CPE Non-member packets.

gemtekDevCpeNtpServer

Object ID: 1.3.6.1.4.1.10529.300.4.3

Syntax: OCTET STRING
Constraints: SIZE (0..64)
Access: read-write
Status: current

NTP Server configuration

gemtekDevCpeNtpServerEnable

Object ID: 1.3.6.1.4.1.10529.300.4.2

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

NTP Server Enable/Disable

gemtekDevCpeNtpServerFromDHCP

Object ID: 1.3.6.1.4.1.10529.300.4.4

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

NTP Server From DHCP

gemtekDevCpePortForwardingEntry

Object ID: 1.3.6.1.4.1.10529.300.8.3.10.1.1

Syntax: Sequence (Structure)

gemtekDevCpePortForwardingIndex

gemtekDevCpePortForwardingWanPortBegin

gemtekDevCpePortForwardingWanPortEnd

gemtekDevCpePortForwardingLanIp

gemtekDevCpePortForwardingLanPortBegin

gemtekDevCpePortForwardingLanPortEnd

gemtekDevCpePortForwardingProtocol

gemtekDevCpePortForwardingEntryEnable

gemtekDevCpePortForwardingRowstatus

Access: not-accessible
Status: current

Port Forwarding Entry
WAN End - WAN Begin=LAN End - LAN Begin, WAN End - WAN Begin <=30,
WAN Begin=>1 WAN End<=65535, LAN Begin=>1 LAN End<=65535

gemtekDevCpePortForwardingEntryEnable

Object ID: 1.3.6.1.4.1.10529.300.8.3.10.1.1.8

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-create
Status: current

Port Forwarding Entry Enable

gemtekDevCpePortForwardingIndex

Object ID: 1.3.6.1.4.1.10529.300.8.3.10.1.1.1

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current

Port Forwarding Index

gemtekDevCpePortForwardingLanIp

Object ID: 1.3.6.1.4.1.10529.300.8.3.10.1.1.4

Syntax: STRING
Constraints: SIZE (4)
Access: read-create
Status: current

Port Forwarding Lan Ip

gemtekDevCpePortForwardingLanPortBegin

Object ID: 1.3.6.1.4.1.10529.300.8.3.10.1.1.5

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-create
Status: current

Port Forwarding Lan Port Begin

gemtekDevCpePortForwardingLanPortEnd

Object ID: 1.3.6.1.4.1.10529.300.8.3.10.1.1.6

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-create
Status: current

Port Forwarding Lan Port End

gemtekDevCpePortForwardingProtocol

Object ID: 1.3.6.1.4.1.10529.300.8.3.10.1.1.7

Syntax: INTEGER
Constraints:

0: tcp

1: udp

2: tcpAndUdp

Access: read-create
Status: current

Port Forwarding Entry Protocol

gemtekDevCpePortForwardingRowstatus

Object ID: 1.3.6.1.4.1.10529.300.8.3.10.1.1.9

Syntax: INTEGER
Constraints:

1: active

2: notInService

3: notReady

4: createAndGo

5: createAndWait

6: destroy

Access: read-create
Status: current

active(1) to active the row and save setting to memory.
createAndWait(5) to create a row in the bottom.
destroy(6) to delete a row.

gemtekDevCpePortForwardingTable

Object ID: 1.3.6.1.4.1.10529.300.8.3.10.1

Syntax: Sequence of Type (Array)

GemtekDevCpePortForwardingEntry

Access: not-accessible
Status: current

Port Forwarding Table

gemtekDevCpePortForwardingWanPortBegin

Object ID: 1.3.6.1.4.1.10529.300.8.3.10.1.1.2

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-create
Status: current

Port Forwarding Wan Port Begin

gemtekDevCpePortForwardingWanPortEnd

Object ID: 1.3.6.1.4.1.10529.300.8.3.10.1.1.3

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-create
Status: current

Port Forwarding Wan Port End

gemtekDevCpePortTriggerEntry

Object ID: 1.3.6.1.4.1.10529.300.8.3.11.1.1

Syntax: Sequence (Structure)

gemtekDevCpePortTriggerIndex

gemtekDevCpePortTriggerName

gemtekDevCpePortTriggerTriggerPortBegin

gemtekDevCpePortTriggerTriggerPortEnd

gemtekDevCpePortTriggerForwardingPortBegin

gemtekDevCpePortTriggerForwardingPortEnd

gemtekDevCpePortTriggerProtocol

gemtekDevCpePortTriggerEntryEnable

gemtekDevCpePortTriggerRowstatus

Access: not-accessible
Status: current

Port Trigger Entry
1<=TriggerPortBegin 1<=ForwardingPortBegin (ForwardingPortEnd-ForwardingPortBegin)<=30

gemtekDevCpePortTriggerEntryEnable

Object ID: 1.3.6.1.4.1.10529.300.8.3.11.1.1.8

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-create
Status: current

Port Trigger Entry Enable

gemtekDevCpePortTriggerForwardingPortBegin

Object ID: 1.3.6.1.4.1.10529.300.8.3.11.1.1.5

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-create
Status: current

Port Trigger Forwarding Port Begin

gemtekDevCpePortTriggerForwardingPortEnd

Object ID: 1.3.6.1.4.1.10529.300.8.3.11.1.1.6

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-create
Status: current

Port Trigger Forwarding Port End

gemtekDevCpePortTriggerIndex

Object ID: 1.3.6.1.4.1.10529.300.8.3.11.1.1.1

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current

Port Trigger Index

gemtekDevCpePortTriggerName

Object ID: 1.3.6.1.4.1.10529.300.8.3.11.1.1.2

Syntax: OCTET STRING
Constraints: SIZE (0..30)
Access: read-create
Status: current

Port Trigger Name

gemtekDevCpePortTriggerProtocol

Object ID: 1.3.6.1.4.1.10529.300.8.3.11.1.1.7

Syntax: INTEGER
Constraints:

0: tcp

1: udp

Access: read-create
Status: current

Port Trigger Protocol

gemtekDevCpePortTriggerRowstatus

Object ID: 1.3.6.1.4.1.10529.300.8.3.11.1.1.9

Syntax: INTEGER
Constraints:

1: active

2: notInService

3: notReady

4: createAndGo

5: createAndWait

6: destroy

Access: read-create
Status: current

active(1) to active the row and save setting to memory.
createAndWait(5) to create a row in the bottom.
destroy(6) to delete a row.

gemtekDevCpePortTriggerTable

Object ID: 1.3.6.1.4.1.10529.300.8.3.11.1

Syntax: Sequence of Type (Array)

GemtekDevCpePortTriggerEntry

Access: not-accessible
Status: current

Port Trigger Table

gemtekDevCpePortTriggerTriggerPortBegin

Object ID: 1.3.6.1.4.1.10529.300.8.3.11.1.1.3

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-create
Status: current

Port Trigger Trigger Port Begin

gemtekDevCpePortTriggerTriggerPortEnd

Object ID: 1.3.6.1.4.1.10529.300.8.3.11.1.1.4

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-create
Status: current

Port Trigger Trigger Port End

gemtekDevCpePreviousSwVersion

Object ID: 1.3.6.1.4.1.10529.300.22.2

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

This value identifies the previous software version in the CPE

gemtekDevCpeProductVersion

Object ID: 1.3.6.1.4.1.10529.300.1.3.12

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Product Version of CPE

gemtekDevCpePullFtpFileName

Object ID: 1.3.6.1.4.1.10529.300.21.5

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

Ftp File Name

gemtekDevCpePullFtpFilePath

Object ID: 1.3.6.1.4.1.10529.300.21.4

Syntax: OCTET STRING
Constraints: SIZE (0..256)
Access: read-write
Status: current

Ftp File Path

gemtekDevCpePullFtpServerIP

Object ID: 1.3.6.1.4.1.10529.300.21.1

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

FTP upgrade server IP

gemtekDevCpePullFtpServerPassword

Object ID: 1.3.6.1.4.1.10529.300.21.3

Syntax: OCTET STRING
Constraints: SIZE (0..32)
Access: read-write
Status: current

Ftp Server Password

gemtekDevCpePullFtpServerUserName

Object ID: 1.3.6.1.4.1.10529.300.21.2

Syntax: OCTET STRING
Constraints: SIZE (0..32)
Access: read-write
Status: current

Ftp Server User Name

gemtekDevCpePullFtpUpgradeAdminStatus

Object ID: 1.3.6.1.4.1.10529.300.21.7

Syntax: INTEGER
Constraints:

0: ready

1: downloading

2: installing

3: error

4: success

Access: read-only
Status: current

Device status information on the progress of the upgrade.

gemtekDevCpePullFtpUpgradeCmd

Object ID: 1.3.6.1.4.1.10529.300.21.6

Syntax: INTEGER
Constraints:

0: default

1: downloadAndUpgrade

2: rollback

Access: read-write
Status: current

Control FTP upgrade

gemtekDevCpePushFtpUpgradeAdminStatus

Object ID: 1.3.6.1.4.1.10529.300.22.5

Syntax: INTEGER
Constraints:

0: ready

1: installing

2: error

3: success

Access: read-only
Status: current

Device status information on the progress of the upgrade.

gemtekDevCpePushFtpUpgradeCmd

Object ID: 1.3.6.1.4.1.10529.300.22.4

Syntax: INTEGER
Constraints:

0: default

1: download

2: upgrade

3: rollback

Access: read-write
Status: current

Control FTP upgrade process

gemtekDevCpeRedirectIcmpToTheDmzHostEnable

Object ID: 1.3.6.1.4.1.10529.300.9.5

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

Redirect ICMP packets to the DMZ host Enable/Disable

gemtekDevCpeRestFactoryDefault

Object ID: 1.3.6.1.4.1.10529.300.2.10

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

Reset to factory default setting.

gemtekDevCpeRfModeBPSK

Object ID: 1.3.6.1.4.1.10529.300.13.2.1

Syntax: Gauge
Constraints: 0..4294967295
Access: read-write
Status: obsolete

The variable is deprecated.
RF Mode BPSK Setting(0~2750)

gemtekDevCpeRfModeQAM16

Object ID: 1.3.6.1.4.1.10529.300.13.2.3

Syntax: Gauge
Constraints: 0..4294967295
Access: read-write
Status: obsolete

The variable is deprecated.
RF Mode QAM16 Setting(0~2750)

gemtekDevCpeRfModeQAM64

Object ID: 1.3.6.1.4.1.10529.300.13.2.4

Syntax: Gauge
Constraints: 0..4294967295
Access: read-write
Status: obsolete

The variable is deprecated.
RF Mode QAM64 Setting(0~2450)

gemtekDevCpeRfModeQPSK

Object ID: 1.3.6.1.4.1.10529.300.13.2.2

Syntax: Gauge
Constraints: 0..4294967295
Access: read-write
Status: obsolete

The variable is deprecated.
RF Mode QPSK Setting(0~2750)

gemtekDevCpeSerialNumber

Object ID: 1.3.6.1.4.1.10529.300.1.3.5

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Serial Number of CPE

gemtekDevCpeServiceFlowARQ

Object ID: 1.3.6.1.4.1.10529.300.11.1.1.11

Syntax: INTEGER
Constraints:

0: no

1: yes

Access: read-only
Status: current

Service Flow ARQ Enable yes/no

gemtekDevCpeServiceFlowBCID

Object ID: 1.3.6.1.4.1.10529.300.11.1.1.4

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

Service Flow Basic CID

gemtekDevCpeServiceFlowCID

Object ID: 1.3.6.1.4.1.10529.300.11.1.1.3

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

Service Flow CID

gemtekDevCpeServiceFlowDirection

Object ID: 1.3.6.1.4.1.10529.300.11.1.1.7

Syntax: INTEGER
Constraints:

1: uplink

2: downlink

3: bidirectional

Access: read-only
Status: current

Service Flow Direction
1:uplink
2:downlink
3:bidirectional

gemtekDevCpeServiceFlowEnable

Object ID: 1.3.6.1.4.1.10529.300.11.1.1.8

Syntax: INTEGER
Constraints:

0: disable

1: enable

Access: read-only
Status: current

Service Flow Enable/Disable

gemtekDevCpeServiceFlowEntry

Object ID: 1.3.6.1.4.1.10529.300.11.1.1

Syntax: Sequence (Structure)

gemtekDevCpeServiceFlowIndex

gemtekDevCpeServiceFlowSFID

gemtekDevCpeServiceFlowCID

gemtekDevCpeServiceFlowBCID

gemtekDevCpeServiceFlowType

gemtekDevCpeServiceFlowState

gemtekDevCpeServiceFlowDirection

gemtekDevCpeServiceFlowEnable

gemtekDevCpeServiceFlowScheduling

gemtekDevCpeServiceFlowMaxRate

gemtekDevCpeServiceFlowARQ

gemtekDevCpeServiceFlowHARQ

gemtekDevCpeServiceFlowRules

Access: not-accessible
Status: current

gemtekDevCpeServiceFlowEntry

gemtekDevCpeServiceFlowHARQ

Object ID: 1.3.6.1.4.1.10529.300.11.1.1.12

Syntax: INTEGER
Constraints:

0: no

1: yes

Access: read-only
Status: current

Service Flow HARQ Enable yes/no

gemtekDevCpeServiceFlowIndex

Object ID: 1.3.6.1.4.1.10529.300.11.1.1.1

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current

Service Flow Index

gemtekDevCpeServiceFlowMaxRate

Object ID: 1.3.6.1.4.1.10529.300.11.1.1.10

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

Service Flow Max Rate(bit/s)

gemtekDevCpeServiceFlowRules

Object ID: 1.3.6.1.4.1.10529.300.11.1.1.13

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

Service Flow calssifier rule numbers

gemtekDevCpeServiceFlowSFID

Object ID: 1.3.6.1.4.1.10529.300.11.1.1.2

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

Service Flow SFID

gemtekDevCpeServiceFlowScheduling

Object ID: 1.3.6.1.4.1.10529.300.11.1.1.9

Syntax: INTEGER
Constraints:

2: bestEffort

3: nrtps

4: rtps

5: ertps

6: ugs

Access: read-only
Status: current

Service Flow Scheduling type

gemtekDevCpeServiceFlowState

Object ID: 1.3.6.1.4.1.10529.300.11.1.1.6

Syntax: INTEGER
Constraints:

0: provisioned

1: admitted

2: active

Access: read-only
Status: current

Service Flow State:
0:provisioned
1:admitted
2:active

gemtekDevCpeServiceFlowTable

Object ID: 1.3.6.1.4.1.10529.300.11.1

Syntax: Sequence of Type (Array)

GemtekDevCpeServiceFlowEntry

Access: not-accessible
Status: current

gemtekDevCpeServiceFlowTable

gemtekDevCpeServiceFlowType

Object ID: 1.3.6.1.4.1.10529.300.11.1.1.5

Syntax: INTEGER
Constraints:

0: basic

1: primary

2: secondary

3: data

4: multicast

Access: read-only
Status: current

Service Flow Type:
0:basic
1:primary
2:secondary
3:data
4multicast

gemtekDevCpeSnmpAccessDomainEnable

Object ID: 1.3.6.1.4.1.10529.300.2.19.1

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

Enable/Disable SNMP access domain(Default:Disable)
Setting will take effect until save and reboot.

gemtekDevCpeSnmpAccessDomainIp

Object ID: 1.3.6.1.4.1.10529.300.2.19.2

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

SNMP access domain IP

gemtekDevCpeSnmpAccessDomainNetmask

Object ID: 1.3.6.1.4.1.10529.300.2.19.3

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

SNMP access domain netmask
EX: gemtekDevCpeSnmpAccessDomainIp = 192.168.1.1
gemtekDevCpeSnmpAccessDomainNetmask = 255.255.255.0
SNMP access domain = 192.168.1.0

gemtekDevCpeSnmpAccessFromLan

Object ID: 1.3.6.1.4.1.10529.300.2.14

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

Allow SNMP access from LAN enabled/disabled.(Default:disabled)
Setting will take effect immediately.

gemtekDevCpeSnmpReadCommunity

Object ID: 1.3.6.1.4.1.10529.300.2.8

Syntax: OCTET STRING
Constraints: SIZE (0..32)
Access: read-write
Status: current

An OID to set/get the SNMP Read community.

gemtekDevCpeSnmpSetCommunity

Object ID: 1.3.6.1.4.1.10529.300.2.9

Syntax: OCTET STRING
Constraints: SIZE (0..32)
Access: read-write
Status: current

An OID to set/get the SNMP Set community.

gemtekDevCpeSyslogEnable

Object ID: 1.3.6.1.4.1.10529.300.12.1

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

Send syslog to syslog server enable/disable

gemtekDevCpeSyslogServerIp

Object ID: 1.3.6.1.4.1.10529.300.12.2

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

config syslog server IP

gemtekDevCpeSyslogServerPort

Object ID: 1.3.6.1.4.1.10529.300.12.3

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-create
Status: current

config syslog server port(1~65535,default:514)

gemtekDevCpeSystemDate

Object ID: 1.3.6.1.4.1.10529.300.4.1

Syntax: OCTET STRING
Access: read-only
Status: current

CPE system Date

gemtekDevCpeTaggedPkts

Object ID: 1.3.6.1.4.1.10529.300.8.2.8.5.1

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

CPE tagged packets.

gemtekDevCpeTaggedPktsReset

Object ID: 1.3.6.1.4.1.10529.300.8.2.8.5.2

Syntax: INTEGER
Constraints:

0: default

1: reset

Access: read-write
Status: current

Reset CPE tagged packets.

gemtekDevCpeTelnetEnable

Object ID: 1.3.6.1.4.1.10529.300.9.8

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

Telnet Enable/Disable

gemtekDevCpeTftpFileName

Object ID: 1.3.6.1.4.1.10529.300.69.2

Syntax: OCTET STRING
Constraints: SIZE (0..256)
Access: read-write
Status: current

TFTP File Name

gemtekDevCpeTftpServerIP

Object ID: 1.3.6.1.4.1.10529.300.69.1

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

TFTP upgrade server IP

gemtekDevCpeTftpUpgradeAdminStatus

Object ID: 1.3.6.1.4.1.10529.300.69.4

Syntax: INTEGER
Constraints:

0: ready

1: downloading

2: installing

3: error

4: success

Access: read-only
Status: current

Device status information on the progress of the upgrade.

gemtekDevCpeTftpUpgradeCmd

Object ID: 1.3.6.1.4.1.10529.300.69.3

Syntax: INTEGER
Constraints:

0: default

1: downloadAndUpgrade

Access: read-write
Status: current

Control TFTP upgrade

gemtekDevCpeTimeZone

Object ID: 1.3.6.1.4.1.10529.300.4.5

Syntax: INTEGER
Constraints: 0..86
Access: read-write
Status: current

CPE Time Zone configuration:
0 (GMT-12:00) International Date Line West ,
1 (GMT-11:00) Midway Island, Samoa ,
2 (GMT-10:00) Hawaii ,
3 (GMT-09:00) Alaska ,
4 (GMT-08:00) Pacific Time (US and Canada) ,
5 (GMT-08:00) Tijuana, Baja California ,
6 (GMT-07:00) Arizona ,
7 (GMT-07:00) Chihuahua, La Paz, Mazatlan - New ,
8 (GMT-07:00) Chihuahua, La Paz, Mazatlan - Old ,
9 (GMT-07:00) Mountain Time (US and Canada) ,
10 (GMT-06:00) Central America ,
11 (GMT-06:00) Central Time (US and Canada) ,
12 (GMT-06:00) Guadalajara, Mexico City, Monterrey - New ,
13 (GMT-06:00) Guadalajara, Mexico City, Monterrey - Old ,
14 (GMT-06:00) Saskatchewan ,
15 (GMT-05:00) Bogota, Lima, Quito, Rio Branco ,
16 (GMT-05:00) Eastern Time (US and Canada) ,
17 (GMT-05:00) Indiana (East) ,
18 (GMT-04:30) Caracas ,
19 (GMT-04:00) Atlantic Time (Canada) ,
20 (GMT-04:00) Caracas, La Paz ,
21 (GMT-04:00) Manaus ,
22 (GMT-04:00) Santiago ,
23 (GMT-03:30) Newfoundland ,
24 (GMT-03:00) Brasilia ,
25 (GMT-03:00) Buenos Aires, Georgetown ,
26 (GMT-03:00) Greenland ,
27 (GMT-03:00) Montevideo ,
28 (GMT-02:00) Mid-Atlantic ,
29 (GMT-01:00) Azores ,
30 (GMT-01:00) Cape Verde Is. ,
31 (GMT) Casablanca, Monrovia, Reykjavik ,
32 (GMT) Greenwich Mean Time - Dublin, Edinburgh, Lisbon, London ,
33 (GMT+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna ,
34 (GMT+01:00) Belgrade, Bratislava, Budapest, Ljubljana, Prague ,
35 (GMT+01:00) Brussels, Copenhagen, Madrid, Paris ,
36 (GMT+01:00) Sarajevo, Skopje, Warsaw, Zagreb ,
37 (GMT+01:00) West Central Africa ,
38 (GMT+02:00) Amman ,
39 (GMT+02:00) Athens, Bucharest, Istanbul ,
40 (GMT+02:00) Beirut ,
41 (GMT+02:00) Cairo ,
42 (GMT+02:00) Harare, Pretoria ,
43 (GMT+02:00) Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius ,
44 (GMT+02:00) Jerusalem ,
45 (GMT+02:00) Minsk ,
46 (GMT+02:00) Windhoek ,
47 (GMT+03:00) Baghdad ,
48 (GMT+03:00) Kuwait, Riyadh ,
49 (GMT+03:00) Moscow, St. Petersburg, Volgograd ,
50 (GMT+03:00) Nairobi ,
51 (GMT+03:00) Tbilisi ,
52 (GMT+03:30) Tehran ,
53 (GMT+04:00) Abu Dhabi, Muscat ,
54 (GMT+04:00) Baku ,
55 (GMT+04:00) Caucasus Standard Time ,
56 (GMT+04:00) Yerevan ,
57 (GMT+04:30) Kabul ,
58 (GMT+05:00) Yekaterinburg ,
59 (GMT+05:00) Islamabad, Karachi, Tashkent ,
60 (GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi ,
61 (GMT+05:30) Sri Jayawardenapura-Kotte ,
62 (GMT+05:45) Kathmandu ,
63 (GMT+06:00) Almaty, Novosibirsk ,
64 (GMT+06:00) Astana, Dhaka ,
65 (GMT+06:30) Yangon (Rangoon) ,
66 (GMT+07:00) Bangkok, Hanoi, Jakarta ,
67 (GMT+07:00) Krasnoyarsk ,
68 (GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi ,
69 (GMT+08:00) Irkutsk, Ulaan Bataar ,
70 (GMT+08:00) Kuala Lumpur, Singapore ,
71 (GMT+08:00) Perth ,
72 (GMT+08:00) Taipei ,
73 (GMT+09:00) Osaka, Sapporo, Tokyo ,
74 (GMT+09:00) Seoul ,
75 (GMT+09:00) Yakutsk ,
76 (GMT+09:30) Adelaide ,
77 (GMT+09:30) Darwin ,
78 (GMT+10:00) Brisbane ,
79 (GMT+10:00) Canberra, Melbourne, Sydney ,
80 (GMT+10:00) Guam, Port Moresby ,
81 (GMT+10:00) Hobart ,
82 (GMT+10:00) Vladivostok ,
83 (GMT+11:00) Magadan, Solomon Is., New Caledonia ,
84 (GMT+12:00) Auckland, Wellington ,
85 (GMT+12:00) Fiji, Kamchatka, Marshall Is. ,
86 (GMT+13:00) Nuku`alofa

gemtekDevCpeUntaggedPkts

Object ID: 1.3.6.1.4.1.10529.300.8.2.8.5.3

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

CPE tagged packets.

gemtekDevCpeUntaggedPktsReset

Object ID: 1.3.6.1.4.1.10529.300.8.2.8.5.4

Syntax: INTEGER
Constraints:

0: default

1: reset

Access: read-write
Status: current

Reset CPE untagged packets.

gemtekDevCpeUserCertificateFileDelete

Object ID: 1.3.6.1.4.1.10529.300.7.10.3

Syntax: INTEGER
Constraints:

1: fileOne

2: fileTwo

Access: read-write
Status: current

delete the user certificate file.
EAP-TLS needs at least one device certificate file.
If you delete all user certificate files,
it will change gemtekDevCpeAuthenticationSelectionPhase1 to EAP-TTLS,
and use device certificate disabled.

gemtekDevCpeUserCertificateFileEntry

Object ID: 1.3.6.1.4.1.10529.300.7.10.5.1

Syntax: Sequence (Structure)

gemtekDevCpeUserCertificateIndex

gemtekDevCpeUserCertificateSize

gemtekDevCpeUserCertificateIssuer

gemtekDevCpeUserValidityDateBegin

gemtekDevCpeUserValidityDateEnd

gemtekDevCpeUserCertificateSubject

Access: not-accessible
Status: current

User certificate file entry

gemtekDevCpeUserCertificateFileName

Object ID: 1.3.6.1.4.1.10529.300.7.10.1.3

Syntax: OCTET STRING
Constraints: SIZE (1..32)
Access: read-write
Status: current

specify the user certificate file name on the FTP server.

gemtekDevCpeUserCertificateFileTable

Object ID: 1.3.6.1.4.1.10529.300.7.10.5

Syntax: Sequence of Type (Array)

GemtekDevCpeUserCertificateFileEntry

Access: not-accessible
Status: current

User certificate file table

gemtekDevCpeUserCertificateFileUpload

Object ID: 1.3.6.1.4.1.10529.300.7.10.1.4

Syntax: INTEGER
Constraints:

0: default

1: upload

Access: read-write
Status: current

check and upload the user certificate file.

gemtekDevCpeUserCertificateIndex

Object ID: 1.3.6.1.4.1.10529.300.7.10.5.1.1

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current

User certificate file Table Index

gemtekDevCpeUserCertificateIssuer

Object ID: 1.3.6.1.4.1.10529.300.7.10.5.1.3

Syntax: OCTET STRING
Constraints: SIZE (0..256)
Access: read-only
Status: current

User certificate file issuer

gemtekDevCpeUserCertificateSize

Object ID: 1.3.6.1.4.1.10529.300.7.10.5.1.2

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

User certificate file size(Byte)

gemtekDevCpeUserCertificateSubject

Object ID: 1.3.6.1.4.1.10529.300.7.10.5.1.6

Syntax: OCTET STRING
Constraints: SIZE (0..256)
Access: read-only
Status: current

User certificate file subject

gemtekDevCpeUserValidityDateBegin

Object ID: 1.3.6.1.4.1.10529.300.7.10.5.1.4

Syntax: OCTET STRING
Constraints: SIZE (0..32)
Access: read-only
Status: current

User certificate file validity date begin

gemtekDevCpeUserValidityDateEnd

Object ID: 1.3.6.1.4.1.10529.300.7.10.5.1.5

Syntax: OCTET STRING
Constraints: SIZE (0..32)
Access: read-only
Status: current

User certificate file validity date end

gemtekDevCpeVlanMembershipEntry

Object ID: 1.3.6.1.4.1.10529.300.8.2.8.3.1

Syntax: Sequence (Structure)

gemtekDevCpeVlanMembershipIndex

gemtekDevCpeVlanMembershipVidBegin

gemtekDevCpeVlanMembershipVidEnd

gemtekDevCpeVlanMembershipVidRowstatus

Access: not-accessible
Status: current

VLAN Membership Entry

gemtekDevCpeVlanMembershipIndex

Object ID: 1.3.6.1.4.1.10529.300.8.2.8.3.1.1

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current

VLAN Membership Index

gemtekDevCpeVlanMembershipTable

Object ID: 1.3.6.1.4.1.10529.300.8.2.8.3

Syntax: Sequence of Type (Array)

GemtekDevCpeVlanMembershipEntry

Access: not-accessible
Status: current

VLAN Membership Table

gemtekDevCpeVlanMembershipVidBegin

Object ID: 1.3.6.1.4.1.10529.300.8.2.8.3.1.2

Syntax: Gauge
Constraints: 0..4294967295
Access: read-create
Status: current

VLAN Membership VLAN VID Begin(0~4095).

gemtekDevCpeVlanMembershipVidEnd

Object ID: 1.3.6.1.4.1.10529.300.8.2.8.3.1.3

Syntax: Gauge
Constraints: 0..4294967295
Access: read-create
Status: current

VLAN Membership VLAN VID End(0~4095).

gemtekDevCpeVlanMembershipVidRowstatus

Object ID: 1.3.6.1.4.1.10529.300.8.2.8.3.1.4

Syntax: INTEGER
Constraints:

1: active

2: notInService

3: notReady

4: createAndGo

5: createAndWait

6: destroy

Access: read-create
Status: current

active(1) to active the row and save setting to memory.
createAndWait(5) to create a row in the bottom.
destroy(6) to delete a row.
Every row can't overlap(Begin,End).

gemtekDevCpeWanMacAddresss

Object ID: 1.3.6.1.4.1.10529.300.1.2.6

Syntax: OCTET STRING
Constraints: SIZE (0..18)
Access: read-only
Status: current

CPE WAN MAC Address

gemtekDevCpeWanTotalDownLinkDataPackets

Object ID: 1.3.6.1.4.1.10529.300.1.2.7

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

WAN Total Down Link Data Packets Report(Packets)

gemtekDevCpeWanTotalUpLinkDataPackets

Object ID: 1.3.6.1.4.1.10529.300.1.2.8

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

WAN Total Up Link Data Packets Report(Packets)

gemtekDevCpeWimaxBandwidth

Object ID: 1.3.6.1.4.1.10529.300.1.1.16

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current

CPE Bandwidth(kHz)

gemtekDevCpeWimaxBsid

Object ID: 1.3.6.1.4.1.10529.300.1.1.7

Syntax: OCTET STRING
Constraints: SIZE (0..18)
Access: read-only
Status: current

Base Station MAC Address

gemtekDevCpeWimaxCinr

Object ID: 1.3.6.1.4.1.10529.300.1.1.2

Syntax: OCTET STRING
Constraints: SIZE (0..32)
Access: read-only
Status: current

CINR Report(dB)

gemtekDevCpeWimaxCinrReuse1

Object ID: 1.3.6.1.4.1.10529.300.1.1.14

Syntax: OCTET STRING
Constraints: SIZE (0..32)
Access: read-only
Status: current

CINR Reuse1 Report(dB)

gemtekDevCpeWimaxCinrReuse3

Object ID: 1.3.6.1.4.1.10529.300.1.1.15

Syntax: OCTET STRING
Constraints: SIZE (0..32)
Access: read-only
Status: current

CINR Reuse3 Report(dB)

gemtekDevCpeWimaxCpeState

Object ID: 1.3.6.1.4.1.10529.300.1.1.13

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

CPE State

gemtekDevCpeWimaxDownLinkDataRate

Object ID: 1.3.6.1.4.1.10529.300.1.1.10

Syntax: OCTET STRING
Constraints: SIZE (0..32)
Access: read-only
Status: current

Down Link Data Rate Report(Kbps)

gemtekDevCpeWimaxDownLinkModulation

Object ID: 1.3.6.1.4.1.10529.300.1.1.6

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Down Link Modulation Type :
QPSK [CC] 1/2
QPSK [CC] 3/4
16-QAM [CC] 1/2
16-QAM [CC] 3/4
64-QAM [CC] 1/2
64-QAM [CC] 2/3
64-QAM [CC] 3/4
QPSK [BTC] 1/2
QPSK [BTC] 3/4 or 2/3
16-QAM [BTC] 3/5
16-QAM [BTC] 4/5
64-QAM [BTC] 2/3 or 5/8
64-QAM [BTC] 5/6 or 4/5
QPSK [CTC] 1/2
Reserved
QPSK [CTC] 3/4
16-QAM [CTC] 1/2
16-QAM [CTC] 3/4
64-QAM [CTC] 1/2
64-QAM [CTC] 2/3
64-QAM [CTC] 3/4
64-QAM [CTC] 5/6
QPSK [ZT CC] 1/2
QPSK [ZT CC] 3/4
16-QAM [ZT CC] 1/2
16-QAM [ZT CC] 3/4
64-QAM [ZT CC] 1/2
64-QAM [ZT CC] 2/3
64-QAM [ZT CC] 3/4
QPSK [LDPC] 1/2
QPSK [LDPC] 2/3 A code
QPSK [LDPC] 3/4 A code
16-QAM [LDPC] 1/2
16-QAM [LDPC] 2/3 A code
16-QAM [LDPC] 3/4 A code
64-QAM [LDPC] 1/2
64-QAM [LDPC] 2/3 A code
64-QAM [LDPC] 3/4 A code
QPSK [LDPC] 2/3 B code
QPSK [LDPC] 3/4 B code
16-QAM [LDPC] 2/3 B code
16-QAM [LDPC] 3/4 B code
64-QAM [LDPC] 2/3 B code
64-QAM [LDPC] 3/4 B code
QPSK [CC with optional interleaver] 1/2
QPSK [CC with optional interleaver] 3/4
16-QAM [CC with optional interleaver] 1/2
16-QAM [CC with optional interleaver] 3/4
64-QAM [CC with optional interleaver] 2/3
64-QAM [CC with optional interleaver] 3/4
QPSK [LDPC] 5/6
16-QAM [LDPC] 5/6
64-QAM [LDPC] 5/6

gemtekDevCpeWimaxFrequency

Object ID: 1.3.6.1.4.1.10529.300.1.1.8

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

Center Frequency (kHz)

gemtekDevCpeWimaxMaxTxPower

Object ID: 1.3.6.1.4.1.10529.300.1.1.4

Syntax: OCTET STRING
Constraints: SIZE (0..32)
Access: read-only
Status: current

MAX Tx Power Report(dBm)

gemtekDevCpeWimaxMimoMode

Object ID: 1.3.6.1.4.1.10529.300.1.1.18

Syntax: INTEGER
Constraints:

0: siso

1: mimoMatrixA

2: mimoMatrixB

4: disconnect

Access: read-only
Status: current

MIMO mode status

gemtekDevCpeWimaxRssi

Object ID: 1.3.6.1.4.1.10529.300.1.1.1

Syntax: OCTET STRING
Constraints: SIZE (0..32)
Access: read-only
Status: current

RSSI Report(dBm)

gemtekDevCpeWimaxTotalDownLinkDataByte

Object ID: 1.3.6.1.4.1.10529.300.1.1.12

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

Total Down Link Data Bytes Report(Bytes)

gemtekDevCpeWimaxTotalUpLinkDataByte

Object ID: 1.3.6.1.4.1.10529.300.1.1.11

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

Total Up Link Data Bytes Report(Bytes)

gemtekDevCpeWimaxTxPower

Object ID: 1.3.6.1.4.1.10529.300.1.1.3

Syntax: OCTET STRING
Constraints: SIZE (0..32)
Access: read-only
Status: current

Tx Power Report(dBm)

gemtekDevCpeWimaxUpLinkDataRate

Object ID: 1.3.6.1.4.1.10529.300.1.1.9

Syntax: OCTET STRING
Constraints: SIZE (0..32)
Access: read-only
Status: current

Up Link Data Rate Report(Kbps)

gemtekDevCpeWimaxUpLinkModulation

Object ID: 1.3.6.1.4.1.10529.300.1.1.5

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Up Link Modulation Type :
QPSK [CC] 1/2
QPSK [CC] 3/4
16-QAM [CC] 1/2
16-QAM [CC] 3/4
64-QAM [CC] 1/2
64-QAM [CC] 2/3
64-QAM [CC] 3/4
QPSK [BTC] 1/2
QPSK [BTC] 3/4
16-QAM [BTC] 3/5
16-QAM [BTC] 4/5
64-QAM [BTC] 5/8
64-QAM [BTC] 4/5
QPSK [CTC] 1/2
Reserved
QPSK [CTC] 3/4
16-QAM [CTC] 1/2
16-QAM [CTC] 3/4
64-QAM [CTC] 1/2
64-QAM [CTC] 2/3
64-QAM [CTC] 3/4
64-QAM [CTC] 5/6
QPSK [ZT CC] 1/2
QPSK [ZT CC] 3/4
16-QAM [ZT CC] 1/2
16-QAM [ZT CC] 3/4
64-QAM [ZT CC] 1/2
64-QAM [ZT CC] 2/3
64-QAM [ZT CC] 3/4
QPSK [LDPC] 1/2
QPSK [LDPC] 2/3 A code
QPSK [LDPC] 3/4 A code
16-QAM [LDPC] 1/2
16-QAM [LDPC] 2/3 A code
16-QAM [LDPC] 3/4 A code
64-QAM [LDPC] 1/2
64-QAM [LDPC] 2/3 A code
64-QAM [LDPC] 3/4 A code
QPSK [CC with optional interleaver] 1/2
QPSK [CC with optional interleaver] 3/4
16-QAM [CC with optional interleaver] 1/2
16-QAM [CC with optional interleaver] 3/4
64-QAM [CC with optional interleaver] 2/3
64-QAM [CC with optional interleaver] 3/4
QPSK [LDPC] 5/6
16-QAM [LDPC] 5/6
64-QAM [LDPC] 5/6

gemtekDevCpeWimaxZoneCinrChannelZero

Object ID: 1.3.6.1.4.1.10529.300.1.1.17

Syntax: OCTET STRING
Constraints: SIZE (0..32)
Access: read-only
Status: current

Zone CINR channel 0 Report(dB)

isRebootRequired

Object ID: 1.3.6.1.4.1.10529.300.2.2

Syntax: INTEGER
Constraints:

0: rebootNotRequired

1: rebootRequired

Access: read-only
Status: current

If reading this OID, rebootRequired(1)
indicates a reboot is currently required,
else, returns rebootNotRequired(0).

operatorEnable

Object ID: 1.3.6.1.4.1.10529.300.5.6

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

set/get WEB operator eabled/disabled

operatorPassword

Object ID: 1.3.6.1.4.1.10529.300.5.5

Syntax: OCTET STRING
Constraints: SIZE (1..32)
Access: read-write
Status: current

set-only WEB operator password

operatorUsername

Object ID: 1.3.6.1.4.1.10529.300.5.4

Syntax: OCTET STRING
Constraints: SIZE (1..32)
Access: read-write
Status: current

set/get WEB operator username

rebootWithResponse

Object ID: 1.3.6.1.4.1.10529.300.2.1

Syntax: INTEGER
Constraints:

0: rebootNotRequired

1: rebootRequired

255: reboot

Access: read-write
Status: current

If reading this OID, rebootRequired(1)
indicates a reboot is currently required,
else, returns rebootNotRequired(0).

snmpBuzzerConfig

Object ID: 1.3.6.1.4.1.10529.300.2.6

Syntax: INTEGER
Constraints:

0: snmpBuzzerDisabled

1: snmpBuzzerEnabled

2: snmpBuzzerDemo

Access: read-write
Status: current

OID to enable/disable/demo the system buzzer.

snmpBuzzerDisableDelay

Object ID: 1.3.6.1.4.1.10529.300.2.7

Syntax: Gauge
Constraints: 0..4294967295
Access: read-write
Status: current

An OID to set the auto disable the buzzer in how many seconds after CPE operational.(0~1800)

startStopWimax

Object ID: 1.3.6.1.4.1.10529.300.2.5

Syntax: INTEGER
Constraints:

0: stop

1: start

Access: read-write
Status: current

Start/Stop WiMAX

trapServerCommunity

Object ID: 1.3.6.1.4.1.10529.300.3.1.4

Syntax: OCTET STRING
Constraints: SIZE (0..32)
Access: read-write
Status: current

trap community

trapServerEnable

Object ID: 1.3.6.1.4.1.10529.300.3.1.1

Syntax: INTEGER
Constraints:

0: disabled

1: enabled

Access: read-write
Status: current

Enables/disables trap. Default: Disable

trapServerIp

Object ID: 1.3.6.1.4.1.10529.300.3.1.2

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

trap server

trapServerPort

Object ID: 1.3.6.1.4.1.10529.300.3.1.3

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-write
Status: current

trap port