MIB File
PMP Common

Module Information:
File: WHISP-BOX-MIBV2-MIB
Description: This module contains generic Box-Level MIB definitions for Canopy Radios.
Organization: Cambium Networks
Version: Software Release v13.x
Contact Info: Canopy Technical Support
email: support@cambiumnetworks.com

Notification Summary
boxLan1DHCPClientEvent Object ID: 1.3.6.1.4.1.161.19.3.3.12.1.1
Lan1 DHCP Client has received a new address via DHCP
Object Summary
accessLevel Object ID: 1.3.6.1.4.1.161.19.3.3.10.1.4
User access level.
addCustomFreqList Object ID: 1.3.6.1.4.1.161.19.3.3.2.53
Add Custom Frequencies.
Frequencies can be added in a list separated by commas. Example: 355000, 345000
Frequencies must be in increments of .05 MHz. Examples: 340025, 340050
A get will return the current custom frequency list.
Max string length entered cannot exceed 128 character.
Note if there is not enough room for all the frequencies none will be added.
For use on 3.5/3.6 GHz MIMO OFDM Radios only.
addCustomFreqMimo Object ID: 1.3.6.1.4.1.161.19.3.3.2.218
Frequency input ie) 3700.50. Deprecated, please use 'addCustomFreqList'.
addRemarkPriority Object ID: 1.3.6.1.4.1.161.19.3.3.2.246
Add 802.1p re-mark entry.
addRemarkVID Object ID: 1.3.6.1.4.1.161.19.3.3.2.245
Add VLAN ID re-marking entry.
addVlanMember Object ID: 1.3.6.1.4.1.161.19.3.3.2.20
Add VLAN memeber.
aggregateBandwidthCap Object ID: 1.3.6.1.4.1.161.19.3.3.1.108
The maximum aggregate (uplink + downlink) the radio is capable of.
agingTimeout Object ID: 1.3.6.1.4.1.161.19.3.3.2.18
Aging timeout.
allIpv4Filter Object ID: 1.3.6.1.4.1.161.19.3.3.2.132
To set all IPv4 packet filter. Enabling this will automatically enable all of the known IP filters (SMB, SNMP, Bootp,
IPv4 Mcast, User Defined Ports, and All Other IPv4).
allIpv6Filter Object ID: 1.3.6.1.4.1.161.19.3.3.2.160
To set all IPv6 packet filter. Enabling this will automatically enable all of the known IPv6 filters (SMB, SNMP, Bootp,
IPv6 Mcast, User Defined Ports, and All Other IPv6).
allOtherIpFilter Object ID: 1.3.6.1.4.1.161.19.3.3.2.131
To set all other IPv4 packet filter.
allOtherIpv6Filter Object ID: 1.3.6.1.4.1.161.19.3.3.2.166
To set all other IPv6 packet filter.
allOthersFilter Object ID: 1.3.6.1.4.1.161.19.3.3.2.134
To set all other packet filter when.
allowColocation Object ID: 1.3.6.1.4.1.161.19.3.3.2.55
Allow or disallow Colocation for software scheduling Backhaul Timing Masters with hardware scheduling Backhaul Timing Masters.
allowRejectThenLocal Object ID: 1.3.6.1.4.1.161.19.3.3.2.120
Control for allowing local authenication if the AAA remote server
allowVIDAccess Object ID: 1.3.6.1.4.1.161.19.3.3.2.39
Allow or disallow local SM management VID access.
antPolarization Object ID: 1.3.6.1.4.1.161.19.3.3.1.28
Antenna polarization for FSK radios.
antType Object ID: 1.3.6.1.4.1.161.19.3.3.1.116
Indicates whether the antenna is integrated or external (connectorized).
antennaGain Object ID: 1.3.6.1.4.1.161.19.3.3.2.14
External Antenna Gain. For radios that uses an external antenna or the DFS feature.
apSmMode Object ID: 1.3.6.1.4.1.161.19.3.3.2.124
Set AP to SM or SM to AP. Useful for facillitating scripting of running Spectrum Analyzer on an AP.
Radio must have AP Feature Key. 1 - Set to SM, 0 - Set to AP.
apType Object ID: 1.3.6.1.4.1.161.19.3.3.2.216
AP Mode of Operation. In standardAP mode, all possible sync sources will be made availble and used
for autoSync operation. In remoteAP mode, sync over power port will not be available as a sync source.
Remote AP mode is where the AP's timing port is connected to an SM's timing port via a sync cable. In this mode,
GPS data is unavailable and sync over power port shouldn't be used. If sync over power is desired, and a CMM or other
sync over power device is in use, then select standardAP mode.
arpFilter Object ID: 1.3.6.1.4.1.161.19.3.3.2.133
To set ARP packet filter.
bandwidth Object ID: 1.3.6.1.4.1.161.19.3.3.2.91
Radio bandwidth setting.
Deprecated for MIMO SMs. Instead use bandwidthScan.
bhModulation Object ID: 1.3.6.1.4.1.161.19.3.3.2.11
Modulation scheme. For Backhaul units only. Only level 4
backhaul can be changed to 20Mbits/Second.
bhTimingMode Object ID: 1.3.6.1.4.1.161.19.3.3.2.10
Variable to switch between Timing Master and Timing Slave.
For Backhaul units only.
bhvlanEnable Object ID: 1.3.6.1.4.1.161.19.3.3.2.75
To enable or disable VLAN for Backhaul Master/Slave.
bootpcFilter Object ID: 1.3.6.1.4.1.161.19.3.3.2.144
To set bootp client sourced packets filter.
bootpsFilter Object ID: 1.3.6.1.4.1.161.19.3.3.2.145
To set bootp server sourced packets filter.
boxDeviceType Object ID: 1.3.6.1.4.1.161.19.3.3.1.6
The type of the device.
boxDeviceTypeID Object ID: 1.3.6.1.4.1.161.19.3.3.1.7
Device type ID.
boxEncryption Object ID: 1.3.6.1.4.1.161.19.3.3.1.8
Device encryption type.
boxFrequency Object ID: 1.3.6.1.4.1.161.19.3.3.1.10
Frequency band of the device.
boxTemperature Object ID: 1.3.6.1.4.1.161.19.3.3.1.5
Radio temperature.
boxTemperatureC Object ID: 1.3.6.1.4.1.161.19.3.3.1.35
Radio temperature in Celsius.
boxTemperatureF Object ID: 1.3.6.1.4.1.161.19.3.3.1.36
Radio temperature in Fahrenheit.
bridgeCbErrStatAPFecQSend Object ID: 1.3.6.1.4.1.161.19.3.3.1.57
Bridge CB Error Stats APFecQSend
bridgeCbErrStatApRfQSend Object ID: 1.3.6.1.4.1.161.19.3.3.1.58
Bridge CB Error Stats ApRfQSend
bridgeCbErrStatBridgeFull Object ID: 1.3.6.1.4.1.161.19.3.3.1.55
Bridge CB Error Stats BridgeFull
bridgeCbErrStatNI1QSend Object ID: 1.3.6.1.4.1.161.19.3.3.1.53
Bridge CB Error Stats ErrNI1QSend
bridgeCbErrStatNI2QSend Object ID: 1.3.6.1.4.1.161.19.3.3.1.54
Bridge CB Error Stats ErrNI2QSend
bridgeCbErrStatSendMsg Object ID: 1.3.6.1.4.1.161.19.3.3.1.56
Bridge CB Error Stats SendMsg
bridgeCbFecStatbin Object ID: 1.3.6.1.4.1.161.19.3.3.1.37
Bridge CB FEC Stats bin
bridgeCbFecStatbout Object ID: 1.3.6.1.4.1.161.19.3.3.1.38
Bridge CB FEC Stats bout
bridgeCbFecStatbtoss Object ID: 1.3.6.1.4.1.161.19.3.3.1.39
Bridge CB FEC Stats btoss
bridgeCbFecStatbtosscap Object ID: 1.3.6.1.4.1.161.19.3.3.1.40
Bridge CB FEC Stats btosscap
bridgeCbFecStatfloods Object ID: 1.3.6.1.4.1.161.19.3.3.1.112
Bridge CB RF Stats Floods (Multipoint AP only)
bridgeCbFecStatuin Object ID: 1.3.6.1.4.1.161.19.3.3.1.41
Bridge CB FEC Stats uin
bridgeCbFecStatuout Object ID: 1.3.6.1.4.1.161.19.3.3.1.42
Bridge CB FEC Stats uout
bridgeCbFecStatutoss Object ID: 1.3.6.1.4.1.161.19.3.3.1.43
Bridge CB FEC Stats utoss
bridgeCbFecStatutosscap Object ID: 1.3.6.1.4.1.161.19.3.3.1.44
Bridge CB FEC Stats utosscap
bridgeCbRFStatbin Object ID: 1.3.6.1.4.1.161.19.3.3.1.45
Bridge CB RF Stats bin
bridgeCbRFStatbout Object ID: 1.3.6.1.4.1.161.19.3.3.1.46
Bridge CB RF Stats bout
bridgeCbRFStatbtoss Object ID: 1.3.6.1.4.1.161.19.3.3.1.47
Bridge CB RF Stats btoss
bridgeCbRFStatbtosscap Object ID: 1.3.6.1.4.1.161.19.3.3.1.48
Bridge CB RF Stats btosscap
bridgeCbRFStatfloods Object ID: 1.3.6.1.4.1.161.19.3.3.1.113
Bridge CB RF Stats Floods (Multipoint AP only)
bridgeCbRFStatuin Object ID: 1.3.6.1.4.1.161.19.3.3.1.49
Bridge CB RF Stats uin
bridgeCbRFStatuout Object ID: 1.3.6.1.4.1.161.19.3.3.1.50
Bridge CB RF Stats uout
bridgeCbRFStatutoss Object ID: 1.3.6.1.4.1.161.19.3.3.1.51
Bridge CB RF Stats utoss
bridgeCbRFStatutosscap Object ID: 1.3.6.1.4.1.161.19.3.3.1.52
Bridge CB RF Stats utosscap
bridgeEnable Object ID: 1.3.6.1.4.1.161.19.3.3.2.24
Disable or enable bridging functionality for a BH unit.
bridgeEntryTimeout Object ID: 1.3.6.1.4.1.161.19.3.3.2.8
Bridge table time out Range : 25 -- 1440 Minutes.
calibrationStatusBool Object ID: 1.3.6.1.4.1.161.19.3.3.1.109
Boolean OID to show if device is calibrated.
Applicable to FSK and MIMO radios only.
calibrationStatusBox Object ID: 1.3.6.1.4.1.161.19.3.3.1.110
String to show if radio is calibrated.
Applicable to FSK and MIMO radios only.
catalinaGainRxCH1 Object ID: 1.3.6.1.4.1.161.19.3.3.1.114
Rcv Gain on Catalina Rx CH1
catalinaGainRxCH2 Object ID: 1.3.6.1.4.1.161.19.3.3.1.115
Rcv Gain on Catalina Rx CH2
changeUsrPwd Object ID: 1.3.6.1.4.1.161.19.3.3.2.56
Allow to change the password of a given user of a given user. Usage: userName,password.
channelBandwidth Object ID: 1.3.6.1.4.1.161.19.3.3.2.83
The current channel bandwidth in MHz.
For use on OFDM Radios only.
Obsoleted for MIMO SMs.
clearBERStats Object ID: 1.3.6.1.4.1.161.19.3.3.3.5
Set to clear the BER statistics by sending a 'clearBERStats'. Value is set back to 'doNotClearBERStats'
When action is complete.
clearEventLog Object ID: 1.3.6.1.4.1.161.19.3.3.3.3
Setting the variable to 1 will clear the event log.
codePoint0 Object ID: 1.3.6.1.4.1.161.19.3.3.9.1
Code Point 0.
codePoint1 Object ID: 1.3.6.1.4.1.161.19.3.3.9.2
Code Point 1.
codePoint10 Object ID: 1.3.6.1.4.1.161.19.3.3.9.11
Code Point 10.
codePoint11 Object ID: 1.3.6.1.4.1.161.19.3.3.9.12
Code Point 11.
codePoint12 Object ID: 1.3.6.1.4.1.161.19.3.3.9.13
Code Point 12.
codePoint13 Object ID: 1.3.6.1.4.1.161.19.3.3.9.14
Code Point 13.
codePoint14 Object ID: 1.3.6.1.4.1.161.19.3.3.9.15
Code Point 14.
codePoint15 Object ID: 1.3.6.1.4.1.161.19.3.3.9.16
Code Point 15.
codePoint16 Object ID: 1.3.6.1.4.1.161.19.3.3.9.17
Code Point 16.
codePoint17 Object ID: 1.3.6.1.4.1.161.19.3.3.9.18
Code Point 17.
codePoint18 Object ID: 1.3.6.1.4.1.161.19.3.3.9.19
Code Point 18.
codePoint19 Object ID: 1.3.6.1.4.1.161.19.3.3.9.20
Code Point 19.
codePoint2 Object ID: 1.3.6.1.4.1.161.19.3.3.9.3
Code Point 2.
codePoint20 Object ID: 1.3.6.1.4.1.161.19.3.3.9.21
Code Point 20.
codePoint21 Object ID: 1.3.6.1.4.1.161.19.3.3.9.22
Code Point 21.
codePoint22 Object ID: 1.3.6.1.4.1.161.19.3.3.9.23
Code Point 22.
codePoint23 Object ID: 1.3.6.1.4.1.161.19.3.3.9.24
Code Point 23.
codePoint24 Object ID: 1.3.6.1.4.1.161.19.3.3.9.25
Code Point 24.
codePoint25 Object ID: 1.3.6.1.4.1.161.19.3.3.9.26
Code Point 25.
codePoint26 Object ID: 1.3.6.1.4.1.161.19.3.3.9.27
Code Point 26.
codePoint27 Object ID: 1.3.6.1.4.1.161.19.3.3.9.28
Code Point 27.
codePoint28 Object ID: 1.3.6.1.4.1.161.19.3.3.9.29
Code Point 28.
codePoint29 Object ID: 1.3.6.1.4.1.161.19.3.3.9.30
Code Point 29.
codePoint3 Object ID: 1.3.6.1.4.1.161.19.3.3.9.4
Code Point 3.
codePoint30 Object ID: 1.3.6.1.4.1.161.19.3.3.9.31
Code Point 30.
codePoint31 Object ID: 1.3.6.1.4.1.161.19.3.3.9.32
Code Point 31.
codePoint32 Object ID: 1.3.6.1.4.1.161.19.3.3.9.33
Code Point 32.
codePoint33 Object ID: 1.3.6.1.4.1.161.19.3.3.9.34
Code Point 33.
codePoint34 Object ID: 1.3.6.1.4.1.161.19.3.3.9.35
Code Point 34.
codePoint35 Object ID: 1.3.6.1.4.1.161.19.3.3.9.36
Code Point 35.
codePoint36 Object ID: 1.3.6.1.4.1.161.19.3.3.9.37
Code Point 36.
codePoint37 Object ID: 1.3.6.1.4.1.161.19.3.3.9.38
Code Point 37.
codePoint38 Object ID: 1.3.6.1.4.1.161.19.3.3.9.39
Code Point 38.
codePoint39 Object ID: 1.3.6.1.4.1.161.19.3.3.9.40
Code Point 39.
codePoint4 Object ID: 1.3.6.1.4.1.161.19.3.3.9.5
Code Point 4.
codePoint40 Object ID: 1.3.6.1.4.1.161.19.3.3.9.41
Code Point 40.
codePoint41 Object ID: 1.3.6.1.4.1.161.19.3.3.9.42
Code Point 41.
codePoint42 Object ID: 1.3.6.1.4.1.161.19.3.3.9.43
Code Point 42.
codePoint43 Object ID: 1.3.6.1.4.1.161.19.3.3.9.44
Code Point 43.
codePoint44 Object ID: 1.3.6.1.4.1.161.19.3.3.9.45
Code Point 44.
codePoint45 Object ID: 1.3.6.1.4.1.161.19.3.3.9.46
Code Point 45.
codePoint46 Object ID: 1.3.6.1.4.1.161.19.3.3.9.47
Code Point 46.
codePoint47 Object ID: 1.3.6.1.4.1.161.19.3.3.9.48
Code Point 47.
codePoint48 Object ID: 1.3.6.1.4.1.161.19.3.3.9.49
Code Point 48.
codePoint49 Object ID: 1.3.6.1.4.1.161.19.3.3.9.50
Code Point 49.
codePoint5 Object ID: 1.3.6.1.4.1.161.19.3.3.9.6
Code Point 5.
codePoint50 Object ID: 1.3.6.1.4.1.161.19.3.3.9.51
Code Point 50.
codePoint51 Object ID: 1.3.6.1.4.1.161.19.3.3.9.52
Code Point 51.
codePoint52 Object ID: 1.3.6.1.4.1.161.19.3.3.9.53
Code Point 52.
codePoint53 Object ID: 1.3.6.1.4.1.161.19.3.3.9.54
Code Point 53.
codePoint54 Object ID: 1.3.6.1.4.1.161.19.3.3.9.55
Code Point 54.
codePoint55 Object ID: 1.3.6.1.4.1.161.19.3.3.9.56
Code Point 55.
codePoint56 Object ID: 1.3.6.1.4.1.161.19.3.3.9.57
Code Point 56.
codePoint57 Object ID: 1.3.6.1.4.1.161.19.3.3.9.58
Code Point 57.
codePoint58 Object ID: 1.3.6.1.4.1.161.19.3.3.9.59
Code Point 58.
codePoint59 Object ID: 1.3.6.1.4.1.161.19.3.3.9.60
Code Point 59.
codePoint6 Object ID: 1.3.6.1.4.1.161.19.3.3.9.7
Code Point 6.
codePoint60 Object ID: 1.3.6.1.4.1.161.19.3.3.9.61
Code Point 60.
codePoint61 Object ID: 1.3.6.1.4.1.161.19.3.3.9.62
Code Point 61.
codePoint62 Object ID: 1.3.6.1.4.1.161.19.3.3.9.63
Code Point 62.
codePoint63 Object ID: 1.3.6.1.4.1.161.19.3.3.9.64
Code Point 63.
codePoint7 Object ID: 1.3.6.1.4.1.161.19.3.3.9.8
Code Point 7.
codePoint8 Object ID: 1.3.6.1.4.1.161.19.3.3.9.9
Code Point 8.
codePoint9 Object ID: 1.3.6.1.4.1.161.19.3.3.9.10
Code Point 9.
colorCode Object ID: 1.3.6.1.4.1.161.19.3.3.2.2
Color code.
commStringROnly Object ID: 1.3.6.1.4.1.161.19.3.3.2.79
Set Read Only commnunity string.
commStringRWrite Object ID: 1.3.6.1.4.1.161.19.3.3.2.36
Read/Write Community string. This is a write-only OID.
controlMessages Object ID: 1.3.6.1.4.1.161.19.3.3.2.250
Control MIMO Rate Adapt Algorithm
0 = MIMO-A
1 = SISO
Engineering use only.
cyclicPrefix Object ID: 1.3.6.1.4.1.161.19.3.3.2.81
Cyclic Prefix value, for OFDM Radios only.
Deprecated for MIMO SMs. For PMP 430 SMs, this value is only used while in PMP 430 mode (1/16 is forced in PMP 450 mode).
dataScramblingMethod Object ID: 1.3.6.1.4.1.161.19.3.3.2.92
This OID is for OFDM only and is obsolete.
deleteRemarkPriority Object ID: 1.3.6.1.4.1.161.19.3.3.2.248
Remove the priority re-marking for this source VID.
deleteRemarkVID Object ID: 1.3.6.1.4.1.161.19.3.3.2.247
Remove the VID re-marking for this source VID.
deleteUser Object ID: 1.3.6.1.4.1.161.19.3.3.2.48
User name to remove.
dhcpLanGateway Object ID: 1.3.6.1.4.1.161.19.3.3.1.15
LAN interface Gateway obtained through DHCP.
dhcpLanIp Object ID: 1.3.6.1.4.1.161.19.3.3.1.13
LAN interface IP obtained through DHCP.
dhcpLanSubnetMask Object ID: 1.3.6.1.4.1.161.19.3.3.1.14
LAN interface Subnet Mask obtained through DHCP.
dhcpRfPublicGateway Object ID: 1.3.6.1.4.1.161.19.3.3.1.18
RF Public interface Gateway obtained through DHCP.
dhcpRfPublicIp Object ID: 1.3.6.1.4.1.161.19.3.3.1.16
RF Public interface IP obtained through DHCP.
dhcpRfPublicSubnetMask Object ID: 1.3.6.1.4.1.161.19.3.3.1.17
RF Public interface Subnet Mask obtained through DHCP.
displayOnlyAccess Object ID: 1.3.6.1.4.1.161.19.3.3.2.3
This variable is deprecated.
dnsAlternateMgmtIP Object ID: 1.3.6.1.4.1.161.19.3.3.13.3
Secondary DNS IP address for the management interface.
dnsIpState Object ID: 1.3.6.1.4.1.161.19.3.3.13.1
Configuration for DNS server IP addresses of the management interface are learned:
0 : Manual, must configure dnsPrimaryMgmtIP and dnsAlternateMgmtIP
1 : Automatic, DNS servers IP addresses are learned from DHCP response of the interface
dnsMgmtDomainName Object ID: 1.3.6.1.4.1.161.19.3.3.13.4
Domain Name to use for management DNS configuration. This domain name may
be concatonated to DNS names used configured for the management interface.
dnsPrimaryMgmtIP Object ID: 1.3.6.1.4.1.161.19.3.3.13.2
Primary DNS IP address for the management interface.
dynamicLearning Object ID: 1.3.6.1.4.1.161.19.3.3.2.16
To enable VLAN dynamic learning.
eirp Object ID: 1.3.6.1.4.1.161.19.3.3.2.15
This variable is deprecated.
encryptionConfig Object ID: 1.3.6.1.4.1.161.19.3.3.2.148
For supported radio, set the encryption algorithm to use.
DES by default. Cannot be set if encryption is disabled.
entryIndex Object ID: 1.3.6.1.4.1.161.19.3.3.10.1.1
User information table index.
entryL2Index Object ID: 1.3.6.1.4.1.161.19.3.3.11.1.1
Neighbor information table index.
etherLinkStatus Object ID: 1.3.6.1.4.1.161.19.3.3.1.9
Ethernet link status.
ethernetLinkSpeed Object ID: 1.3.6.1.4.1.161.19.3.3.2.80
Set/Get Ethernet link speed and duplex settings. Note that the Gigabit options are only valid for boards that support Gigabit speeds.
extFilterDelay Object ID: 1.3.6.1.4.1.161.19.3.3.2.13
External Filters Delay. For 900MHz radios only.
fecCRCError Object ID: 1.3.6.1.4.1.161.19.3.3.1.223
Number of packets having CRC Error.
fecCarSenseLost Object ID: 1.3.6.1.4.1.161.19.3.3.1.229
Carrier Sense Lost count.
fecEnable Object ID: 1.3.6.1.4.1.161.19.3.3.2.25
Disable or enable FEC error correction functionality
for multipoint units.
fecEthBusErr Object ID: 1.3.6.1.4.1.161.19.3.3.1.222
Ethernet Busy Error Count
fecInDiscardsCount Object ID: 1.3.6.1.4.1.161.19.3.3.1.94
Ethernet in discards count.
fecInDiscardsOverloadCount Object ID: 1.3.6.1.4.1.161.19.3.3.1.102
Ethernet in discards overload.
fecInErrorsCount Object ID: 1.3.6.1.4.1.161.19.3.3.1.95
Ethernet in errors count.
fecLateCollision Object ID: 1.3.6.1.4.1.161.19.3.3.1.226
Number of packets having late collision.
fecNoCarrier Object ID: 1.3.6.1.4.1.161.19.3.3.1.230
No carrier asserted by external transciever during transmission.
fecOutDiscardsCount Object ID: 1.3.6.1.4.1.161.19.3.3.1.96
Ethernet out discards count.
fecOutDiscardsOverloadCount Object ID: 1.3.6.1.4.1.161.19.3.3.1.103
Ethernet out discards overload.
fecOutErrorsCount Object ID: 1.3.6.1.4.1.161.19.3.3.1.97
Ethernet out errors count.
fecRetransLimitExp Object ID: 1.3.6.1.4.1.161.19.3.3.1.227
Number of packets whose retransmision limit expired.
fecRxBabErr Object ID: 1.3.6.1.4.1.161.19.3.3.1.220
Error count in Babble Receiver.
fecRxFifoNoBuf Object ID: 1.3.6.1.4.1.161.19.3.3.1.224
Number of times could not get a buffer from Rx Fifo.
fecRxOverrun Object ID: 1.3.6.1.4.1.161.19.3.3.1.225
Number of times Rx Fifo Overrun.
fecStatLinkDetected Object ID: 1.3.6.1.4.1.161.19.3.3.1.92
Ethernet link detected count
fecStatLinkLost Object ID: 1.3.6.1.4.1.161.19.3.3.1.91
Ethernet link lost count
fecStatUnderSizedToss Object ID: 1.3.6.1.4.1.161.19.3.3.1.219
Undersized Toss Count
fecTxHbErr Object ID: 1.3.6.1.4.1.161.19.3.3.1.221
Number of packets having Transmit heartbeat error.
fecTxUnderrun Object ID: 1.3.6.1.4.1.161.19.3.3.1.228
Number of times Tx queue underrun.
fpgaBuildDate Object ID: 1.3.6.1.4.1.161.19.3.3.1.107
Display the entire fpga build date string. (Engineering Only)
fpgaCompileInfo Object ID: 1.3.6.1.4.1.161.19.3.3.1.106
Display the fpga compiled attributes. (Engineering Only)
frameType Object ID: 1.3.6.1.4.1.161.19.3.3.2.19
Allow only tagged frame.
frequency Object ID: 1.3.6.1.4.1.161.19.3.3.15.3.1.1
Frequency.
ftpPort Object ID: 1.3.6.1.4.1.161.19.3.3.2.150
Port used to for FTP. Default is 21.
fullAccess Object ID: 1.3.6.1.4.1.161.19.3.3.2.4
Full access password.
gpsInput Object ID: 1.3.6.1.4.1.161.19.3.3.2.42
Values 1, 2, 3 have been deprecated.
(0) Generate AP sync signal.
(1) Deprecated. Sync AP to received signal (Timing Port/UGPS). It will set AutoSync.
(2) Deprecated. Sync AP to received signal (Power Port). It will set AutoSync plus Free Run.
(3) Deprecated. Sync AP using iGPS (Only on devices which support it). It will set AutoSync plus Free Run.
(4) AutoSync.
(5) AutoSync plus Free Run.
height Object ID: 1.3.6.1.4.1.161.19.3.3.2.90
The height setting of this unit in meters.
hiPriority Object ID: 1.3.6.1.4.1.161.19.3.3.2.44
Enable Hi Priority Data Queue on BH radios.
httpPort Object ID: 1.3.6.1.4.1.161.19.3.3.2.151
Port used to for HTTP. Default is 80.
hwsCompatibility Object ID: 1.3.6.1.4.1.161.19.3.3.2.41
If enable, it ensures 6.0 compatibility with HWS.
inSyncCount Object ID: 1.3.6.1.4.1.161.19.3.3.1.21
Counter for number of In Synchronization.
installationColorCode Object ID: 1.3.6.1.4.1.161.19.3.3.2.123
Installation Color Code. Allows non-configured SMs to register to an AP with UCC enabled
in order to facilitate remote provisioning.
interleave Object ID: 1.3.6.1.4.1.161.19.3.3.2.214
Engineering use only.
ip4MultFilter Object ID: 1.3.6.1.4.1.161.19.3.3.2.146
To set IPv4 MultiCast packets filter when
NAT is disabled.
ipv6MultFilter Object ID: 1.3.6.1.4.1.161.19.3.3.2.165
To set IPv6 MultiCast packets filter when
NAT is disabled.
ipv6bootpcFilter Object ID: 1.3.6.1.4.1.161.19.3.3.2.163
To set IPv6 bootp client sourced packets filter.
ipv6bootpsFilter Object ID: 1.3.6.1.4.1.161.19.3.3.2.164
To set IPv6 bootp server sourced packets filter.
ipv6smbFilter Object ID: 1.3.6.1.4.1.161.19.3.3.2.161
To set IPv6 SMB packet filter.
ipv6snmpFilter Object ID: 1.3.6.1.4.1.161.19.3.3.2.162
To set IPv6 SNMP packet filter.
ism Object ID: 1.3.6.1.4.1.161.19.3.3.2.43
Enable ISM on 5.7GHz frequency band radios.
lan1DhcpRelease Object ID: 1.3.6.1.4.1.161.19.3.3.2.201
Setting the variable to '1' will release LAN1's IP address
and send a DHCP Release Message to the DHCP server.
Applicable only when NAT is disabled.
lan1DhcpRenew Object ID: 1.3.6.1.4.1.161.19.3.3.2.202
Setting the variable to '1' will renew LAN1's lease time
for its current IP address.
Applicable only when NAT is disabled.
lan3DhcpRelease Object ID: 1.3.6.1.4.1.161.19.3.3.2.203
Setting the variable to '1' will release LAN3's (RF Public) IP address
and send a DHCP Release Message to the DHCP server.
Applicable only when NAT is enabled.
lan3DhcpRenew Object ID: 1.3.6.1.4.1.161.19.3.3.2.204
Setting the variable to '1' will renew LAN3's (RF Public)
lease time for its current IP address.
Applicable only when NAT is enabled.
lanDhcpState Object ID: 1.3.6.1.4.1.161.19.3.3.2.50
To enable or disable LAN Interface DHCP feature.
lanDhcpStatus Object ID: 1.3.6.1.4.1.161.19.3.3.1.19
Display LAN interface current DHPC status.
largeVCQ Object ID: 1.3.6.1.4.1.161.19.3.3.2.87
Enable or disable Large VC Qs for SM or PTP radios. Enable when Uplink is being used for camera video feed.
latitude Object ID: 1.3.6.1.4.1.161.19.3.3.2.88
The latitude setting of this unit in decimal degrees.
linkNegoSpeed Object ID: 1.3.6.1.4.1.161.19.3.3.2.1
Link negotiation speeds.
H10BT -- 10 Base T Half Duplex,
F10BT -- 10 Base T Full Duplex,
H100BT -- 100 Base T Half Duplex,
F100BT -- 100 Base T Full Duplex.
Separate the values with comma when doing a set.
e.g. H10BT,F10BT,H100BT,F100BT
lldpBroadcastEnable Object ID: 1.3.6.1.4.1.161.19.3.3.2.76
To enable Broadcast of LLDP message, if disabled LLDP uses multicast
loginMethod Object ID: 1.3.6.1.4.1.161.19.3.3.10.1.6
User login method.
loginStatus Object ID: 1.3.6.1.4.1.161.19.3.3.10.1.5
User current status.
longitude Object ID: 1.3.6.1.4.1.161.19.3.3.2.89
The longitude setting of this unit in decimal degrees.
mac10VIDMapAddr Object ID: 1.3.6.1.4.1.161.19.3.3.2.114
MAC Address for Entry 10 in MAC Address VID Mapping Table.
mac10VIDMapPriority Object ID: 1.3.6.1.4.1.161.19.3.3.2.240
VID priority for Entry 10 in MAC Address VID Mapping Table.
mac10VIDMapPriorityMode Object ID: 1.3.6.1.4.1.161.19.3.3.2.241
VID priority Mode for Entry 10 in MAC Address VID Mapping Table.
mac10VIDMapVid Object ID: 1.3.6.1.4.1.161.19.3.3.2.115
VID for Entry 10 in MAC Address VID Mapping Table.
mac1VIDMapAddr Object ID: 1.3.6.1.4.1.161.19.3.3.2.96
MAC Address for Entry 1 in MAC Address VID Mapping Table.
mac1VIDMapPriority Object ID: 1.3.6.1.4.1.161.19.3.3.2.222
VID priority for Entry 1 in MAC Address VID Mapping Table.
mac1VIDMapPriorityMode Object ID: 1.3.6.1.4.1.161.19.3.3.2.223
VID priority Mode for Entry 1 in MAC Address VID Mapping Table.
mac1VIDMapVid Object ID: 1.3.6.1.4.1.161.19.3.3.2.97
VID for Entry 1 in MAC Address VID Mapping Table.
mac2VIDMapAddr Object ID: 1.3.6.1.4.1.161.19.3.3.2.98
MAC Address for Entry 2 in MAC Address VID Mapping Table.
mac2VIDMapPriority Object ID: 1.3.6.1.4.1.161.19.3.3.2.224
VID priority for Entry 2 in MAC Address VID Mapping Table.
mac2VIDMapPriorityMode Object ID: 1.3.6.1.4.1.161.19.3.3.2.225
VID priority Mode for Entry 2 in MAC Address VID Mapping Table.
mac2VIDMapVid Object ID: 1.3.6.1.4.1.161.19.3.3.2.99
VID for Entry 2 in MAC Address VID Mapping Table.
mac3VIDMapAddr Object ID: 1.3.6.1.4.1.161.19.3.3.2.100
MAC Address for Entry 3 in MAC Address VID Mapping Table.
mac3VIDMapPriority Object ID: 1.3.6.1.4.1.161.19.3.3.2.226
VID priority for Entry 3 in MAC Address VID Mapping Table.
mac3VIDMapPriorityMode Object ID: 1.3.6.1.4.1.161.19.3.3.2.227
VID priority Mode for Entry 3 in MAC Address VID Mapping Table.
mac3VIDMapVid Object ID: 1.3.6.1.4.1.161.19.3.3.2.101
VID for Entry 3 in MAC Address VID Mapping Table.
mac4VIDMapAddr Object ID: 1.3.6.1.4.1.161.19.3.3.2.102
MAC Address for Entry 4 in MAC Address VID Mapping Table.
mac4VIDMapPriority Object ID: 1.3.6.1.4.1.161.19.3.3.2.228
VID priority for Entry 4 in MAC Address VID Mapping Table.
mac4VIDMapPriorityMode Object ID: 1.3.6.1.4.1.161.19.3.3.2.229
VID priority Mode for Entry 4 in MAC Address VID Mapping Table.
mac4VIDMapVid Object ID: 1.3.6.1.4.1.161.19.3.3.2.103
VID for Entry 4 in MAC Address VID Mapping Table.
mac5VIDMapAddr Object ID: 1.3.6.1.4.1.161.19.3.3.2.104
MAC Address for Entry 5 in MAC Address VID Mapping Table.
mac5VIDMapPriority Object ID: 1.3.6.1.4.1.161.19.3.3.2.230
VID priority for Entry 5 in MAC Address VID Mapping Table.
mac5VIDMapPriorityMode Object ID: 1.3.6.1.4.1.161.19.3.3.2.231
VID priority Mode for Entry 5 in MAC Address VID Mapping Table.
mac5VIDMapVid Object ID: 1.3.6.1.4.1.161.19.3.3.2.105
VID for Entry 5 in MAC Address VID Mapping Table.
mac6VIDMapAddr Object ID: 1.3.6.1.4.1.161.19.3.3.2.106
MAC Address for Entry 6 in MAC Address VID Mapping Table.
mac6VIDMapPriority Object ID: 1.3.6.1.4.1.161.19.3.3.2.232
VID priority for Entry 6 in MAC Address VID Mapping Table.
mac6VIDMapPriorityMode Object ID: 1.3.6.1.4.1.161.19.3.3.2.233
VID priority Mode for Entry 6 in MAC Address VID Mapping Table.
mac6VIDMapVid Object ID: 1.3.6.1.4.1.161.19.3.3.2.107
VID for Entry 6 in MAC Address VID Mapping Table.
mac7VIDMapAddr Object ID: 1.3.6.1.4.1.161.19.3.3.2.108
MAC Address for Entry 7 in MAC Address VID Mapping Table.
mac7VIDMapPriority Object ID: 1.3.6.1.4.1.161.19.3.3.2.234
VID priority for Entry 7 in MAC Address VID Mapping Table.
mac7VIDMapPriorityMode Object ID: 1.3.6.1.4.1.161.19.3.3.2.235
VID priority Mode for Entry 7 in MAC Address VID Mapping Table.
mac7VIDMapVid Object ID: 1.3.6.1.4.1.161.19.3.3.2.109
VID for Entry 7 in MAC Address VID Mapping Table.
mac8VIDMapAddr Object ID: 1.3.6.1.4.1.161.19.3.3.2.110
MAC Address for Entry 8 in MAC Address VID Mapping Table.
mac8VIDMapPriority Object ID: 1.3.6.1.4.1.161.19.3.3.2.236
VID priority for Entry 8 in MAC Address VID Mapping Table.
mac8VIDMapPriorityMode Object ID: 1.3.6.1.4.1.161.19.3.3.2.237
VID priority Mode for Entry 8 in MAC Address VID Mapping Table.
mac8VIDMapVid Object ID: 1.3.6.1.4.1.161.19.3.3.2.111
VID for Entry 8 in MAC Address VID Mapping Table.
mac9VIDMapAddr Object ID: 1.3.6.1.4.1.161.19.3.3.2.112
MAC Address for Entry 9 in MAC Address VID Mapping Table.
mac9VIDMapPriority Object ID: 1.3.6.1.4.1.161.19.3.3.2.238
VID priority for Entry 9 in MAC Address VID Mapping Table.
mac9VIDMapPriorityMode Object ID: 1.3.6.1.4.1.161.19.3.3.2.239
VID priority Mode for Entry 9 in MAC Address VID Mapping Table.
mac9VIDMapVid Object ID: 1.3.6.1.4.1.161.19.3.3.2.113
VID for Entry 9 in MAC Address VID Mapping Table.
managementVID Object ID: 1.3.6.1.4.1.161.19.3.3.2.17
Management VLAN VID.
managementVIDPriority Object ID: 1.3.6.1.4.1.161.19.3.3.2.242
management VID VID VLAN Priority.
managementVIDPriorityMode Object ID: 1.3.6.1.4.1.161.19.3.3.2.243
management VID VLAN Priority Mode.
mimoRateAdaptAlgorithm Object ID: 1.3.6.1.4.1.161.19.3.3.2.249
Engineering use only.
Control MIMO Rate Adapt Algorithm
0 = MIMO-A/B This chooses MIMO-A or MIMO-B dynamically to maximize throughput
1 = MIMO-B only
2 = MIMO-A only
3 = SISO only
mngtIP Object ID: 1.3.6.1.4.1.161.19.3.3.2.38
Management IP address 1.
mngtIP10 Object ID: 1.3.6.1.4.1.161.19.3.3.2.73
Management IP address 10.
mngtIP2 Object ID: 1.3.6.1.4.1.161.19.3.3.2.57
Management IP address 2.
mngtIP3 Object ID: 1.3.6.1.4.1.161.19.3.3.2.59
Management IP address 3.
mngtIP4 Object ID: 1.3.6.1.4.1.161.19.3.3.2.61
Management IP address 4.
mngtIP5 Object ID: 1.3.6.1.4.1.161.19.3.3.2.63
Management IP address 5.
mngtIP6 Object ID: 1.3.6.1.4.1.161.19.3.3.2.65
Management IP address 6.
mngtIP7 Object ID: 1.3.6.1.4.1.161.19.3.3.2.67
Management IP address 7.
mngtIP8 Object ID: 1.3.6.1.4.1.161.19.3.3.2.69
Management IP address 8.
mngtIP9 Object ID: 1.3.6.1.4.1.161.19.3.3.2.71
Management IP address 9.
natDhcpRelease Object ID: 1.3.6.1.4.1.161.19.3.3.2.205
Setting the variable to '1' will release WAN's (NAT Public) IP address
and send a DHCP Release Message to the DHCP server.
Applicable only when NAT is enabled.
natDhcpRenew Object ID: 1.3.6.1.4.1.161.19.3.3.2.206
Setting the variable to '1' will renew WAN's (NAT Public)
lease time for its current IP address.
Applicable only when NAT is enabled.
natDhcpStatus Object ID: 1.3.6.1.4.1.161.19.3.3.1.93
Display NAT Public interface current DHPC status.
neighborIP Object ID: 1.3.6.1.4.1.161.19.3.3.11.1.3
Neighbor IP.
neighborMAC Object ID: 1.3.6.1.4.1.161.19.3.3.11.1.2
Neighbor MAC.
neighborSiteName Object ID: 1.3.6.1.4.1.161.19.3.3.11.1.4
Neighbor Site Name.
numDFSDetections Object ID: 1.3.6.1.4.1.161.19.3.3.1.33
Number of DFS/LBT Detections since last boot.
numberCustomFreq Object ID: 1.3.6.1.4.1.161.19.3.3.2.82
Number of custom frequencies added.
There is a maximum of 100.
For use on 3.5 GHz OFDM Radios only.
outSyncCount Object ID: 1.3.6.1.4.1.161.19.3.3.1.22
Counter for number of Out of Synchronization.
packetFilterDirection Object ID: 1.3.6.1.4.1.161.19.3.3.2.147
To set packet filter direction. Upstream is default.
packetOverloadCounter Object ID: 1.3.6.1.4.1.161.19.3.3.1.29
Total packet overload count.
pass1Status Object ID: 1.3.6.1.4.1.161.19.3.3.2.6
Password 1(display only) status.
pass2Status Object ID: 1.3.6.1.4.1.161.19.3.3.2.7
Password 2(full access) status.
pathIndex Object ID: 1.3.6.1.4.1.161.19.3.3.15.2.1.1
Path Index.
platformInfo Object ID: 1.3.6.1.4.1.161.19.3.3.1.27
Platform information.
platformType Object ID: 1.3.6.1.4.1.161.19.3.3.1.12
Platform type: Canopy, Canopy Lite, Canopy Lite - Advantage,
Advantage, Russian, Russian - Advantage.
platformVer Object ID: 1.3.6.1.4.1.161.19.3.3.1.11
Hardware platform version. For internal use.
pldVersion Object ID: 1.3.6.1.4.1.161.19.3.3.1.26
PLD version information.
pllOutLockCount Object ID: 1.3.6.1.4.1.161.19.3.3.1.23
Counter for number of PLL out of Lock.
port1TCPFilter Object ID: 1.3.6.1.4.1.161.19.3.3.2.136
To set user defined port 1 TCP traffic filter.
port1UDPFilter Object ID: 1.3.6.1.4.1.161.19.3.3.2.137
To set user defined port 1 UDP traffic filter.
port2TCPFilter Object ID: 1.3.6.1.4.1.161.19.3.3.2.139
To set user defined port 2 TCP traffic filter.
port2UDPFilter Object ID: 1.3.6.1.4.1.161.19.3.3.2.140
To set user defined port 2 UDP traffic filter.
port3TCPFilter Object ID: 1.3.6.1.4.1.161.19.3.3.2.142
To set user defined port 3 TCP traffic filter.
port3UDPFilter Object ID: 1.3.6.1.4.1.161.19.3.3.2.143
To set user defined port 3 UDP traffic filter.
portVID Object ID: 1.3.6.1.4.1.161.19.3.3.2.93
Backhaul Port VID (PVID).
powerControl Object ID: 1.3.6.1.4.1.161.19.3.3.2.12
Power control.
pppoeCtlPriority Object ID: 1.3.6.1.4.1.161.19.3.3.2.149
Prioritization of PPPoE Control packets.
pppoeFilter Object ID: 1.3.6.1.4.1.161.19.3.3.2.125
To set PPPoE packet filter.
priorityPrecedence Object ID: 1.3.6.1.4.1.161.19.3.3.2.122
Allows user to decide if 802.1p or DiffServ priority bits should be used first when making priority decisions.
providerVID Object ID: 1.3.6.1.4.1.161.19.3.3.2.95
Provider VID for QinQ VLAN.
radioConfigIndex Object ID: 1.3.6.1.4.1.161.19.3.3.16.1.1.1
Radio Config Index.
radioEngKeyed Object ID: 1.3.6.1.4.1.161.19.3.3.1.111
This will be set either as 0 if the engineering key patch is not applied to the radio or 1 if it is applied.
radioFrequencyBand Object ID: 1.3.6.1.4.1.161.19.3.3.16.1.1.2
Currently configured radio band.
radioIndex Object ID: 1.3.6.1.4.1.161.19.3.3.15.1.1.1
Radio Index.
radioMSN Object ID: 1.3.6.1.4.1.161.19.3.3.1.87
MSN of the radio.
radioPaths Object ID: 1.3.6.1.4.1.161.19.3.3.15.1.1.3
Indicates number of paths. For FSK or OFDM (non-MIMO), this is 1.
For MIMO, it can be greater (with a current maximum of 2).
radioRateAdapt Object ID: 1.3.6.1.4.1.161.19.3.3.2.85
Rate adaptation parameter
0: 1x No rate adaptation (FSK and SISO OFDM QPSK)
1: 1x/2x (FSK and SISO OFDM 16-QAM)

Following are OFDM only:
2: 1x/2x/3x (SISO OFDM 64-QAM)
3: 1x/2x/3x/4x (SISO OFDM 256-QAM) Engineering only

Following are MIMO OFDM only:
4: 1x MIMO-A (QPSK duplicated on both paths)
5: 1x/2x MIMO-B (QPSK on each path)
7: 1x/2x/4x MIMO-B (16-QAM on each path)
8: 1x/2x/4x/6x MIMO-B (64-QAM on each path)
9: 1x/2x/4x/6x/8x MIMO-B (256-QAM on each path)
10: 1x/2x MIMO-A (16-QAM duplicated on both paths)
11: 1x/2x/3x MIMO-A (64-QAM duplicated on both paths)
12: 1x/2x/3x/4x MIMO-A (256-QAM duplicated on both paths)

For PMP 430 radios this applies to Downlink Rate Adapt only.
Use radioRateAdaptUL for setting uplink rate adapt on PMP 430 radios.
For PMP 450 radios, engineering use only.
radioRateAdaptUL Object ID: 1.3.6.1.4.1.161.19.3.3.2.94
Uplink Rate adaptation parameter
0: 1x No rate adaptation (FSK and SISO OFDM QPSK)
1: 1x/2x (FSK and SISO OFDM 16-QAM)

Following are OFDM only:
2: 1x/2x/3x (SISO OFDM 64-QAM)
3: 1x/2x/3x/4x (SISO OFDM 256-QAM) Engineering only

Following are MIMO OFDM only:
4: 1x MIMO-A (QPSK duplicated on both paths)
5: 1x/2x MIMO-B (QPSK on each path)
7: 1x/2x/4x MIMO-B (16-QAM on each path)
8: 1x/2x/4x/6x MIMO-B (64-QAM on each path)
9: 1x/2x/4x/6x/8x MIMO-B (256-QAM on each path)
10: 1x/2x MIMO-A (16-QAM duplicated on both paths)
11: 1x/2x/3x MIMO-A (64-QAM duplicated on both paths)
12: 1x/2x/3x/4x MIMO-A (256-QAM duplicated on both paths)

For PMP 430 radios this applies to Uplink Rate Adapt only.
Use radioRateAdapt for setting downlink rate adapt on PMP 430 radios.
For PMP 450 radios, engineering use only.
radioType Object ID: 1.3.6.1.4.1.161.19.3.3.15.1.1.2
Indicates if the radio is FSK or OFDM.
reboot Object ID: 1.3.6.1.4.1.161.19.3.3.3.2
Setting the variable to 1 will reboot the unit. When the
unit finishes rebooting, it will be in finishedReboot state.
rebootIfRequired Object ID: 1.3.6.1.4.1.161.19.3.3.3.4
Setting the variable to 1 will reboot the unit if reboot is required.
receiveQualityDebug Object ID: 1.3.6.1.4.1.161.19.3.3.2.215
Enable or disable receive quality calculations for every packet.
Enabling(1) will calulate receive quality on all receiving packets. Due to load on CPU, will slightly packet per second capabilities on AP/BH.
Default to disabled for all radios.
Only applicable to GenII OFDM products and up.
region Object ID: 1.3.6.1.4.1.161.19.3.3.2.207
Set Region Code for the Unit.
regionAfrica Object ID: 1.3.6.1.4.1.161.19.3.3.2.217
Country Code for Africa.
regionAsia Object ID: 1.3.6.1.4.1.161.19.3.3.2.208
Country Code for Asia.
regionCode Object ID: 1.3.6.1.4.1.161.19.3.3.2.77
Set Region Code for the Unit. Used the individual region[Region] OIDs instead.
regionEurope Object ID: 1.3.6.1.4.1.161.19.3.3.2.209
Country Code for Europe.
regionNorthAmerica Object ID: 1.3.6.1.4.1.161.19.3.3.2.210
Country Code for North America.
regionOceania Object ID: 1.3.6.1.4.1.161.19.3.3.2.211
Country Code for Oceania.
regionOtherRegulatory Object ID: 1.3.6.1.4.1.161.19.3.3.2.213
Regulatory setting for governing regulatory body.
regionSouthAmerica Object ID: 1.3.6.1.4.1.161.19.3.3.2.212
Country Code for South America.
remarkPriority Object ID: 1.3.6.1.4.1.161.19.3.3.17.1.5
Remark Priority.
remarkPriorityState Object ID: 1.3.6.1.4.1.161.19.3.3.17.1.4
Remark Priority State.
remarkSrcVID Object ID: 1.3.6.1.4.1.161.19.3.3.2.244
Source VID to apply remarking on.
remarkVID Object ID: 1.3.6.1.4.1.161.19.3.3.17.1.3
Remark VID.
remarkVIDState Object ID: 1.3.6.1.4.1.161.19.3.3.17.1.2
Remark VID State.
removeCustomFreqList Object ID: 1.3.6.1.4.1.161.19.3.3.2.54
Remove Custom Frequencies.
Frequencies can be removed in a list separated by commas. Example: 355000, 345000
A get will return the current custom frequencies.
For use on 3.5 GHz OFDM Radios only.
removeCustomFreqMimo Object ID: 1.3.6.1.4.1.161.19.3.3.2.219
Frequency input ie) 3700.50. Deprecated, please use 'removeCustomFreqList'.
removeVlanMember Object ID: 1.3.6.1.4.1.161.19.3.3.2.21
Remove VLAN memeber.
rfInDiscardsCount Object ID: 1.3.6.1.4.1.161.19.3.3.1.98
RF in discards count.
rfInDiscardsOverloadCount Object ID: 1.3.6.1.4.1.161.19.3.3.1.104
Rf in discards overload.
rfInErrorsCount Object ID: 1.3.6.1.4.1.161.19.3.3.1.99
RF in errors count.
rfOutDiscardsCount Object ID: 1.3.6.1.4.1.161.19.3.3.1.100
RF out discards count.
rfOutDiscardsOverloadCount Object ID: 1.3.6.1.4.1.161.19.3.3.1.105
Rf out discards overload.
rfOutErrorsCount Object ID: 1.3.6.1.4.1.161.19.3.3.1.101
RF out errors count.
rfPublicDhcpStatus Object ID: 1.3.6.1.4.1.161.19.3.3.1.20
Display RF Public interface current DHPC status.
rfStatBadBcastCtlCnt Object ID: 1.3.6.1.4.1.161.19.3.3.1.70
RF Scheduler Stats Bad Broadcast Control Count
rfStatBadFreqBcnRcvCnt Object ID: 1.3.6.1.4.1.161.19.3.3.1.73
RF Scheduler Stats Wrong Frequency Beacon Received Count
rfStatBadInSyncIDRcv Object ID: 1.3.6.1.4.1.161.19.3.3.1.78
RF Scheduler Stats Bad In Sync ID Received Count
rfStatBeaconVerMismatchCnt Object ID: 1.3.6.1.4.1.161.19.3.3.1.72
RF Scheduler Stats Beacon version Mismatch Count
rfStatInSyncCount Object ID: 1.3.6.1.4.1.161.19.3.3.1.65
RF Scheduler Stats In Sync Count
rfStatOutSyncCount Object ID: 1.3.6.1.4.1.161.19.3.3.1.66
RF Scheduler Stats Out Sync Count
rfStatOverrunCount Object ID: 1.3.6.1.4.1.161.19.3.3.1.67
RF Scheduler Stats Overrun Count
rfStatPLLOutOfLockCnt Object ID: 1.3.6.1.4.1.161.19.3.3.1.71
RF Scheduler Stats PLL Out of Lock Count
rfStatRSSIOutOfRange Object ID: 1.3.6.1.4.1.161.19.3.3.1.80
RF Scheduler Stats RSSI Out of Range Count
rfStatRangeCapEnf Object ID: 1.3.6.1.4.1.161.19.3.3.1.81
RF Scheduler Stats Range Cap Enforced Count
rfStatRcvBDataCnt Object ID: 1.3.6.1.4.1.161.19.3.3.1.62
RF Scheduler Stats Receive Broadcast Data Count
rfStatRcvCntlCnt Object ID: 1.3.6.1.4.1.161.19.3.3.1.64
RF Scheduler Stats Receive Control Count
rfStatRcvCorruptControlCount Object ID: 1.3.6.1.4.1.161.19.3.3.1.117
RF Scheduler Stats Receive Corrupt Control Data Count
rfStatRcvCorruptDataCount Object ID: 1.3.6.1.4.1.161.19.3.3.1.69
RF Scheduler Stats Receive Corrupt Data Count
rfStatRcvLTResult Object ID: 1.3.6.1.4.1.161.19.3.3.1.84
RF Scheduler Stats Rcv LT Result Count
rfStatRcvLTStart Object ID: 1.3.6.1.4.1.161.19.3.3.1.82
RF Scheduler Stats Rcv LT Start Count
rfStatRcvLTStartHS Object ID: 1.3.6.1.4.1.161.19.3.3.1.83
RF Scheduler Stats Rcv LT Start HS Count
rfStatRcvMDataCnt Object ID: 1.3.6.1.4.1.161.19.3.3.1.218
RF Scheduler Stats Receive Multicast Data Count
rfStatRcvUDataCnt Object ID: 1.3.6.1.4.1.161.19.3.3.1.61
RF Scheduler Stats Receive Unicast Data Count
rfStatTempOutOfRange Object ID: 1.3.6.1.4.1.161.19.3.3.1.79
RF Scheduler Stats Temperature Out of Range Count
rfStatTxCalFailCnt Object ID: 1.3.6.1.4.1.161.19.3.3.1.77
RF Scheduler Stats TX Calibration Failures Count
rfStatUnderrunCount Object ID: 1.3.6.1.4.1.161.19.3.3.1.68
RF Scheduler Stats Underrun Count
rfStatUnkwnFeatBcnRcvCnt Object ID: 1.3.6.1.4.1.161.19.3.3.1.76
RF Scheduler Stats Unknown Feature Beacon Received Count
rfStatUnsupFeatBcnRcvCnt Object ID: 1.3.6.1.4.1.161.19.3.3.1.75
RF Scheduler Stats Unsupported Feature Beacon Received Count
rfStatXmtBDataCnt Object ID: 1.3.6.1.4.1.161.19.3.3.1.60
RF Scheduler Stats Transmit Broadcast Data Count
rfStatXmtCntlCnt Object ID: 1.3.6.1.4.1.161.19.3.3.1.63
RF Scheduler Stats Transmit Control Count
rfStatXmtLTResult Object ID: 1.3.6.1.4.1.161.19.3.3.1.85
RF Scheduler Stats Xmt LT Result Count
rfStatXmtMDataCnt Object ID: 1.3.6.1.4.1.161.19.3.3.1.217
RF Scheduler Stats Transmit Multicast Data Count
rfStatXmtUDataCnt Object ID: 1.3.6.1.4.1.161.19.3.3.1.59
RF Scheduler Stats Transmit Unicast Data Count
rfStatnonLiteBcnRcvCnt Object ID: 1.3.6.1.4.1.161.19.3.3.1.74
RF Scheduler Stats Non Lite Beacon Received Count
russiaRegion Object ID: 1.3.6.1.4.1.161.19.3.3.2.78
Set Category Region for Russian 5.9/6.05 GHz Radio Only. Use setting under regionAsia now.
rxOverrunPkts Object ID: 1.3.6.1.4.1.161.19.3.3.1.34
Counter for number of received overrun packets error.
saveFlash Object ID: 1.3.6.1.4.1.161.19.3.3.3.1
This variable is currently deprecated.
scheduling Object ID: 1.3.6.1.4.1.161.19.3.3.2.22
To use hardware or software scheduling
sessionTime Object ID: 1.3.6.1.4.1.161.19.3.3.10.1.7
Users logged in session time.
sessionTimeout Object ID: 1.3.6.1.4.1.161.19.3.3.2.51
Timer for Telnet, Web and FTP sessions.
setDefaultPlug Object ID: 1.3.6.1.4.1.161.19.3.3.2.40
If enable parameters are set to Factory Defaults upon default plug detection.
setDefaults Object ID: 1.3.6.1.4.1.161.19.3.3.2.84
Setting this to 1 will set the radio to Factory Defaults after the next reboot. Setting this to 0
will undo Factory Defaults if and only if Factory Defaults have been set previously without rebooting.
Reading this OID will return 0 if Factory Defaults are not set, or a 2 if Factory Defaults are set and
we are now awaiting a reboot. NOTE: this operation is reversible as long as you write a 0 to this OID
prior to reboot. As a security measure, this OID is only valid when the radio was booted with the default
plug inserted. If the default plug was not inserted on boot, then attempting to set this OID will fail.
siteInfoViewable Object ID: 1.3.6.1.4.1.161.19.3.3.2.86
Enable non login users the ability to view Site Information
smbFilter Object ID: 1.3.6.1.4.1.161.19.3.3.2.126
To set SMB packet filter.
snmpFilter Object ID: 1.3.6.1.4.1.161.19.3.3.2.127
To set SNMP packet filter.
snmpMibPerm Object ID: 1.3.6.1.4.1.161.19.3.3.2.9
Read/Write permission for MIB groups.
snmpPort Object ID: 1.3.6.1.4.1.161.19.3.3.2.153
Port used to for SNMP. Default is 161.
snmpTrapPort Object ID: 1.3.6.1.4.1.161.19.3.3.2.154
Port used to for SNMP Traps. Default is 162.
snrCalculation Object ID: 1.3.6.1.4.1.161.19.3.3.2.121
This OID is deprecated. Receive quality calulation is always on since it no longer affects packet per second performance.
sourceVID Object ID: 1.3.6.1.4.1.161.19.3.3.17.1.1
Source VLAN ID.
spectrumAnalysisActionBox Object ID: 1.3.6.1.4.1.161.19.3.3.2.221
Start or stop timed or continuous Spectrum Analysis and also give status.
(0) - Stop Spectrum Analysis
(1) - Start Timed Spectrum Analysis
(2) - Start Continuous Spectrum Analysis
(3) - Idle, no Spectrum Analysis results.
(4) - Idle, Spectrum Analysis results available.
(5) - Timed or Remote Spectrum Analysis in progress.
(6) - Continuous Spectrum Analysis in progress.
Note: Continuous mode has a max of 24 hours.
(7) - Spectrum Analyzer not ready.
subnetMask Object ID: 1.3.6.1.4.1.161.19.3.3.2.37
Subnet mask for the management IP 1.
subnetMask10 Object ID: 1.3.6.1.4.1.161.19.3.3.2.74
Subnet mask for the management IP 10.
subnetMask2 Object ID: 1.3.6.1.4.1.161.19.3.3.2.58
Subnet mask for the management IP 2.
subnetMask3 Object ID: 1.3.6.1.4.1.161.19.3.3.2.60
Subnet mask for the management IP 3.
subnetMask4 Object ID: 1.3.6.1.4.1.161.19.3.3.2.62
Subnet mask for the management IP 4.
subnetMask5 Object ID: 1.3.6.1.4.1.161.19.3.3.2.64
Subnet mask for the management IP 5.
subnetMask6 Object ID: 1.3.6.1.4.1.161.19.3.3.2.66
Subnet mask for the management IP 6.
subnetMask7 Object ID: 1.3.6.1.4.1.161.19.3.3.2.68
Subnet mask for the management IP 7.
subnetMask8 Object ID: 1.3.6.1.4.1.161.19.3.3.2.70
Subnet mask for the management IP 8.
subnetMask9 Object ID: 1.3.6.1.4.1.161.19.3.3.2.72
Subnet mask for the management IP 9.
swVersion Object ID: 1.3.6.1.4.1.161.19.3.3.1.25
Software version information.
syslogDomainNameAppend Object ID: 1.3.6.1.4.1.161.19.3.3.2.156
Select whether to append the configured management domain name to
the Syslog server name. For example, if dnsMgmtDomainName is
set to 'example.com', syslogServerAddr is set to 'syslog1', and syslogDomainNameAppend
is set to appendDomain, the Syslog Server name used would be 'syslog1.example.com'.
syslogMinLevel Object ID: 1.3.6.1.4.1.161.19.3.3.2.159
Sets the minimum syslog severity to transmit. Messages with a lower severity value (i.e. numerically higher) than this will not be transmitted.
syslogServerAddr Object ID: 1.3.6.1.4.1.161.19.3.3.2.157
Syslog server address either in dotted decimal notation or a Fully Qualified Domain Name
syslogServerPort Object ID: 1.3.6.1.4.1.161.19.3.3.2.158
Listening port on the Syslog server. Default is 514.
syslogStatDropped Object ID: 1.3.6.1.4.1.161.19.3.3.1.90
Number of dropped syslog messages due to device overload and/or resource limitations.
syslogStatTxSuccesses Object ID: 1.3.6.1.4.1.161.19.3.3.1.89
The count of Syslog messages sent to UDP layer.
timedSpectrumAnalysisDurationBox Object ID: 1.3.6.1.4.1.161.19.3.3.2.220
Value in seconds for a timed spectrum analysis. Range is 10-1000 seconds.
transmitterOP Object ID: 1.3.6.1.4.1.161.19.3.3.2.23
Transmitter output power. This is not available on OFDM SMs.
trap1 Object ID: 1.3.6.1.4.1.161.19.3.3.13.6
SNMP Trap IP Address 1.
Format is either an IP address or DNS name.
trap10 Object ID: 1.3.6.1.4.1.161.19.3.3.13.15
SNMP Trap IP Address 10.
Format is either an IP address or DNS name.
trap2 Object ID: 1.3.6.1.4.1.161.19.3.3.13.7
SNMP Trap IP Address 2.
Format is either an IP address or DNS name.
trap3 Object ID: 1.3.6.1.4.1.161.19.3.3.13.8
SNMP Trap IP Address 3.
Format is either an IP address or DNS name.
trap4 Object ID: 1.3.6.1.4.1.161.19.3.3.13.9
SNMP Trap IP Address 4.
Format is either an IP address or DNS name.
trap5 Object ID: 1.3.6.1.4.1.161.19.3.3.13.10
SNMP Trap IP Address 5.
Format is either an IP address or DNS name.
trap6 Object ID: 1.3.6.1.4.1.161.19.3.3.13.11
SNMP Trap IP Address 6.
Format is either an IP address or DNS name.
trap7 Object ID: 1.3.6.1.4.1.161.19.3.3.13.12
SNMP Trap IP Address 7.
Format is either an IP address or DNS name.
trap8 Object ID: 1.3.6.1.4.1.161.19.3.3.13.13
SNMP Trap IP Address 8.
Format is either an IP address or DNS name.
trap9 Object ID: 1.3.6.1.4.1.161.19.3.3.13.14
SNMP Trap IP Address 9.
Format is either an IP address or DNS name.
trapDomainNameAppend Object ID: 1.3.6.1.4.1.161.19.3.3.13.5
Select whether to append the configured management domain name to
the configured trap names. For example, if dnsMgmtDomainName is
set to 'example.com', trap1 is set to 'trap1', and trapDomainNameAppend
is set to appendDomain, the trap1 name used would be 'trap1.example.com'.
trapIP1 Object ID: 1.3.6.1.4.1.161.19.3.3.2.26
Obsoleted. Configure with whispBoxDNS.trap1.
trapIP10 Object ID: 1.3.6.1.4.1.161.19.3.3.2.35
Obsoleted. Configure with whispBoxDNS.trap10.
trapIP2 Object ID: 1.3.6.1.4.1.161.19.3.3.2.27
Obsoleted. Configure with whispBoxDNS.trap2.
trapIP3 Object ID: 1.3.6.1.4.1.161.19.3.3.2.28
Obsoleted. Configure with whispBoxDNS.trap3.
trapIP4 Object ID: 1.3.6.1.4.1.161.19.3.3.2.29
Obsoleted. Configure with whispBoxDNS.trap4.
trapIP5 Object ID: 1.3.6.1.4.1.161.19.3.3.2.30
Obsoleted. Configure with whispBoxDNS.trap5.
trapIP6 Object ID: 1.3.6.1.4.1.161.19.3.3.2.31
Obsoleted. Configure with whispBoxDNS.trap6.
trapIP7 Object ID: 1.3.6.1.4.1.161.19.3.3.2.32
Obsoleted. Configure with whispBoxDNS.trap7.
trapIP8 Object ID: 1.3.6.1.4.1.161.19.3.3.2.33
Obsoleted. Configure with whispBoxDNS.trap8.
trapIP9 Object ID: 1.3.6.1.4.1.161.19.3.3.2.34
Obsoleted. Configure with whispBoxDNS.trap9.
twoXRate Object ID: 1.3.6.1.4.1.161.19.3.3.2.49
To enable or disable double rate.
txCalFailure Object ID: 1.3.6.1.4.1.161.19.3.3.1.24
Counter for number of TX Calibration failure.
updateDevice Object ID: 1.3.6.1.4.1.161.19.3.3.3.6
Use to update the software on the device
updateStatus Object ID: 1.3.6.1.4.1.161.19.3.3.1.88
Current Status of Device Update
userAccessLevel Object ID: 1.3.6.1.4.1.161.19.3.3.2.47
User access level.
userDefinedPort1 Object ID: 1.3.6.1.4.1.161.19.3.3.2.135
An integer value of number one user defined port. Range:0-65535
userDefinedPort2 Object ID: 1.3.6.1.4.1.161.19.3.3.2.138
An integer value of number two user defined port. Range:0-65535
userDefinedPort3 Object ID: 1.3.6.1.4.1.161.19.3.3.2.141
An integer value of number three user defined port. Range:0-65535
userLoginName Object ID: 1.3.6.1.4.1.161.19.3.3.10.1.2
User name.
userName Object ID: 1.3.6.1.4.1.161.19.3.3.2.45
User name.
userP1Filter Object ID: 1.3.6.1.4.1.161.19.3.3.2.128
To set user defined port 1 packet filter.
userP2Filter Object ID: 1.3.6.1.4.1.161.19.3.3.2.129
To set user defined port 2 packet filter.
userP3Filter Object ID: 1.3.6.1.4.1.161.19.3.3.2.130
To set user defined port 3 packet filter.
userPassword Object ID: 1.3.6.1.4.1.161.19.3.3.2.46
User password.
userPswd Object ID: 1.3.6.1.4.1.161.19.3.3.10.1.3
User password.
usrAccountEnableAccounting Object ID: 1.3.6.1.4.1.161.19.3.3.2.119
Select the level of accounting information to be reported to the server
vlanAcceptQinQFrames Object ID: 1.3.6.1.4.1.161.19.3.3.2.117
Allow/Disallow packets already doubly-tagged (QinQ) to ingress the FEC of BHM, BHS, or MP SM. Not configurable on MP AP.
vlanMemberSource Object ID: 1.3.6.1.4.1.161.19.3.3.2.52
Specified the VLAN member source to display. 0=configured, 1=active configuration.
Note that this OID is internal to SNMP and is not available at the Web Interface.
vlanPortType Object ID: 1.3.6.1.4.1.161.19.3.3.2.116
VLAN Port Type for VLAN interface. Default is Q.
webAutoUpdate Object ID: 1.3.6.1.4.1.161.19.3.3.2.5
Web page auto update in seconds. 0 means disabled.
whispBoxBoot Object ID: 1.3.6.1.4.1.161.19.3.3.1.4
Software boot version.
whispBoxBridgeEntry Object ID: 1.3.6.1.4.1.161.19.3.3.4.1
Bridge entry.
whispBoxBridgeTable Object ID: 1.3.6.1.4.1.161.19.3.3.4
Bridge table.
whispBoxEsn Object ID: 1.3.6.1.4.1.161.19.3.3.1.3
Electronic serial number(MAC address) assigned to Radio.
whispBoxEvntLog Object ID: 1.3.6.1.4.1.161.19.3.3.5.1
Event log for AP and SM.
whispBoxFPGAVer Object ID: 1.3.6.1.4.1.161.19.3.3.1.2
Version of FPGA.
whispBoxP11BstrapFPGAVer Object ID: 1.3.6.1.4.1.161.19.3.3.1.32
P11 Bootstrap FPGA Version.
whispBoxP11FPGAType Object ID: 1.3.6.1.4.1.161.19.3.3.1.31
FPGA Type on P11 and P12 radios.
whispBoxP11Personality Object ID: 1.3.6.1.4.1.161.19.3.3.1.30
Board Personality Configuration of P11 and P12 radios.
whispBoxRFConfigRadioEntry Object ID: 1.3.6.1.4.1.161.19.3.3.16.1.1
Radio config table entry.
whispBoxRFConfigRadios Object ID: 1.3.6.1.4.1.161.19.3.3.16.1
Radio configuration table.
whispBoxRFPhysicalRadioEntry Object ID: 1.3.6.1.4.1.161.19.3.3.15.1.1
Radio information table entry.
whispBoxRFPhysicalRadioFrequencies Object ID: 1.3.6.1.4.1.161.19.3.3.15.3
Available frequency information table.
whispBoxRFPhysicalRadioFrequencyEntry Object ID: 1.3.6.1.4.1.161.19.3.3.15.3.1
Available frequency table entry.
whispBoxRFPhysicalRadioPathEntry Object ID: 1.3.6.1.4.1.161.19.3.3.15.2.1
Radio path table entry.
whispBoxRFPhysicalRadioPaths Object ID: 1.3.6.1.4.1.161.19.3.3.15.2
Radio path information table.
whispBoxRFPhysicalRadios Object ID: 1.3.6.1.4.1.161.19.3.3.15.1
Radio information table.
whispBoxSoftwareVer Object ID: 1.3.6.1.4.1.161.19.3.3.1.1
Version of software. Should be noted in the event customer has
technical difficulties and need to contact technical support.
whispBridgeAge Object ID: 1.3.6.1.4.1.161.19.3.3.4.1.3
Table entry last access age in minutes.
whispBridgeCAM Object ID: 1.3.6.1.4.1.161.19.3.3.4.1.6
This entry is deprecated.
whispBridgeDesLuid Object ID: 1.3.6.1.4.1.161.19.3.3.4.1.2
This is the Local Unit Identifier assigned to
Subscriber Modems.
whispBridgeExt Object ID: 1.3.6.1.4.1.161.19.3.3.4.1.4
Timeout extension flag for entries which also
reside in the PNA APR cache.
whispBridgeHash Object ID: 1.3.6.1.4.1.161.19.3.3.4.1.5
Hash table array index.
whispBridgeMacAddr Object ID: 1.3.6.1.4.1.161.19.3.3.4.1.1
MAC Address of the registered enity.
whispBridgeTbErr Object ID: 1.3.6.1.4.1.161.19.3.3.7.3
Bridging table errors.
whispBridgeTbFree Object ID: 1.3.6.1.4.1.161.19.3.3.7.2
Number of free entries in bridging table.
whispBridgeTbUsed Object ID: 1.3.6.1.4.1.161.19.3.3.7.1
Number of used entries in bridging table.
whispFeatureKeyOrigin Object ID: 1.3.6.1.4.1.161.19.3.3.1.86
Origin of Feature Key which includes GMT time and location of the Key programming (if time is 0 the key was converted locally)
whispLayer2NeighborEntry Object ID: 1.3.6.1.4.1.161.19.3.3.11.1
Neighbor Entry.
whispLayer2NeighborTable Object ID: 1.3.6.1.4.1.161.19.3.3.11
Neighbor information table.
whispUserEntry Object ID: 1.3.6.1.4.1.161.19.3.3.10.1
User entry.
whispUserTable Object ID: 1.3.6.1.4.1.161.19.3.3.10
User information table.
whispVAge Object ID: 1.3.6.1.4.1.161.19.3.3.8.1.3
VLAN member age.
whispVID Object ID: 1.3.6.1.4.1.161.19.3.3.8.1.1
VLAN member ID.
whispVLANEntry Object ID: 1.3.6.1.4.1.161.19.3.3.8.1
VLAN entry.
whispVLANRemarkEntry Object ID: 1.3.6.1.4.1.161.19.3.3.17.1
Remarking VLAN entry.
whispVLANRemarkTable Object ID: 1.3.6.1.4.1.161.19.3.3.17
Active VLAN Remarking table.
whispVLANTable Object ID: 1.3.6.1.4.1.161.19.3.3.8
VLAN member table.
whispVType Object ID: 1.3.6.1.4.1.161.19.3.3.8.1.2
VLAN member type.
whispWebUserAccessMode Object ID: 1.3.6.1.4.1.161.19.3.3.2.118
This variable selects if web page users for the radio should be authenticated locally or
via a centralised remote Radius server
 

Notification Details

boxLan1DHCPClientEvent

Object ID: 1.3.6.1.4.1.161.19.3.3.12.1.1
Syntax: Sequence (Structure)
boxLan1DHCPClientEvent
dhcpLanIp
whispBoxEsn

Access: SNMP Notification
Status: current

Lan1 DHCP Client has received a new address via DHCP


Object Details

accessLevel

Object ID: 1.3.6.1.4.1.161.19.3.3.10.1.4
Syntax: INTEGER
Access: read-only
Status: current

User access level.


addCustomFreqList

Object ID: 1.3.6.1.4.1.161.19.3.3.2.53
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

Add Custom Frequencies.
Frequencies can be added in a list separated by commas. Example: 355000, 345000
Frequencies must be in increments of .05 MHz. Examples: 340025, 340050
A get will return the current custom frequency list.
Max string length entered cannot exceed 128 character.
Note if there is not enough room for all the frequencies none will be added.
For use on 3.5/3.6 GHz MIMO OFDM Radios only.


addCustomFreqMimo

Object ID: 1.3.6.1.4.1.161.19.3.3.2.218
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

Frequency input ie) 3700.50. Deprecated, please use 'addCustomFreqList'.


addRemarkPriority

Object ID: 1.3.6.1.4.1.161.19.3.3.2.246
Syntax: INTEGER
Constraints: 0..7
Access: read-write
Status: current

Add 802.1p re-mark entry.


addRemarkVID

Object ID: 1.3.6.1.4.1.161.19.3.3.2.245
Syntax: INTEGER
Constraints: 1..4094
Access: read-write
Status: current

Add VLAN ID re-marking entry.


addVlanMember

Object ID: 1.3.6.1.4.1.161.19.3.3.2.20
Syntax: INTEGER
Access: read-write
Status: current

Add VLAN memeber.


aggregateBandwidthCap

Object ID: 1.3.6.1.4.1.161.19.3.3.1.108
Syntax: INTEGER
Access: read-only
Status: current

The maximum aggregate (uplink + downlink) the radio is capable of.


agingTimeout

Object ID: 1.3.6.1.4.1.161.19.3.3.2.18
Syntax: INTEGER
Access: read-write
Status: current

Aging timeout.


allIpv4Filter

Object ID: 1.3.6.1.4.1.161.19.3.3.2.132
Syntax: INTEGER
Constraints:
0: filterOff
1: filterOn

Access: read-write
Status: current

To set all IPv4 packet filter. Enabling this will automatically enable all of the known IP filters (SMB, SNMP, Bootp,
IPv4 Mcast, User Defined Ports, and All Other IPv4).


allIpv6Filter

Object ID: 1.3.6.1.4.1.161.19.3.3.2.160
Syntax: INTEGER
Constraints:
0: filterOff
1: filterOn

Access: read-write
Status: current

To set all IPv6 packet filter. Enabling this will automatically enable all of the known IPv6 filters (SMB, SNMP, Bootp,
IPv6 Mcast, User Defined Ports, and All Other IPv6).


allOtherIpFilter

Object ID: 1.3.6.1.4.1.161.19.3.3.2.131
Syntax: INTEGER
Constraints:
0: filterOff
1: filterOn

Access: read-write
Status: current

To set all other IPv4 packet filter.


allOtherIpv6Filter

Object ID: 1.3.6.1.4.1.161.19.3.3.2.166
Syntax: INTEGER
Constraints:
0: filterOff
1: filterOn

Access: read-write
Status: current

To set all other IPv6 packet filter.


allOthersFilter

Object ID: 1.3.6.1.4.1.161.19.3.3.2.134
Syntax: INTEGER
Constraints:
0: filterOff
1: filterOn

Access: read-write
Status: current

To set all other packet filter when.


allowColocation

Object ID: 1.3.6.1.4.1.161.19.3.3.2.55
Syntax: INTEGER
Constraints:
0: disable
1: enable

Access: read-write
Status: obsolete

Allow or disallow Colocation for software scheduling Backhaul Timing Masters with hardware scheduling Backhaul Timing Masters.


allowRejectThenLocal

Object ID: 1.3.6.1.4.1.161.19.3.3.2.120
Syntax: INTEGER
Constraints:
0: doNotAllowLocalAuthifAAAReject
1: allowLocalAuthIfAAAReject

Access: read-write
Status: current

Control for allowing local authenication if the AAA remote server


allowVIDAccess

Object ID: 1.3.6.1.4.1.161.19.3.3.2.39
Syntax: INTEGER
Constraints:
0: enable
1: disable

Access: read-write
Status: current

Allow or disallow local SM management VID access.


antPolarization

Object ID: 1.3.6.1.4.1.161.19.3.3.1.28
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Antenna polarization for FSK radios.


antType

Object ID: 1.3.6.1.4.1.161.19.3.3.1.116
Syntax: INTEGER
Constraints:
0: integrated
1: external

Access: read-only
Status: current

Indicates whether the antenna is integrated or external (connectorized).


antennaGain

Object ID: 1.3.6.1.4.1.161.19.3.3.2.14
Syntax: INTEGER
Access: read-write
Status: current

External Antenna Gain. For radios that uses an external antenna or the DFS feature.


apSmMode

Object ID: 1.3.6.1.4.1.161.19.3.3.2.124
Syntax: INTEGER
Constraints:
0: ap
1: sm

Access: read-write
Status: current

Set AP to SM or SM to AP. Useful for facillitating scripting of running Spectrum Analyzer on an AP.
Radio must have AP Feature Key. 1 - Set to SM, 0 - Set to AP.


apType

Object ID: 1.3.6.1.4.1.161.19.3.3.2.216
Syntax: INTEGER
Constraints:
0: standardAP
1: remoteAP

Access: read-write
Status: current

AP Mode of Operation. In standardAP mode, all possible sync sources will be made availble and used
for autoSync operation. In remoteAP mode, sync over power port will not be available as a sync source.
Remote AP mode is where the AP's timing port is connected to an SM's timing port via a sync cable. In this mode,
GPS data is unavailable and sync over power port shouldn't be used. If sync over power is desired, and a CMM or other
sync over power device is in use, then select standardAP mode.


arpFilter

Object ID: 1.3.6.1.4.1.161.19.3.3.2.133
Syntax: INTEGER
Constraints:
0: filterOff
1: filterOn

Access: read-write
Status: current

To set ARP packet filter.


bandwidth

Object ID: 1.3.6.1.4.1.161.19.3.3.2.91
Syntax: INTEGER
Constraints:
1: bandwidth5mhz
10: bandwidth10-20mhz
11: bandwidth5-10-20mhz
3: bandwidth10mhz
5: bandwidth20mhz
8: bandwidth5-10mhz
9: bandwidth5-20mhz

Access: read-write
Status: current

Radio bandwidth setting.
Deprecated for MIMO SMs. Instead use bandwidthScan.


bhModulation

Object ID: 1.3.6.1.4.1.161.19.3.3.2.11
Syntax: INTEGER
Constraints:
0: tenMbitsPerSecond
1: twentyMbitsPerSecond

Access: read-write
Status: obsolete

Modulation scheme. For Backhaul units only. Only level 4
backhaul can be changed to 20Mbits/Second.


bhTimingMode

Object ID: 1.3.6.1.4.1.161.19.3.3.2.10
Syntax: INTEGER
Constraints:
0: timeingSlave
1: timingMaster

Access: read-write
Status: current

Variable to switch between Timing Master and Timing Slave.
For Backhaul units only.


bhvlanEnable

Object ID: 1.3.6.1.4.1.161.19.3.3.2.75
Syntax: INTEGER
Constraints:
0: disable
1: enable

Access: read-write
Status: current

To enable or disable VLAN for Backhaul Master/Slave.


bootpcFilter

Object ID: 1.3.6.1.4.1.161.19.3.3.2.144
Syntax: INTEGER
Constraints:
0: filterOff
1: filterOn

Access: read-write
Status: current

To set bootp client sourced packets filter.


bootpsFilter

Object ID: 1.3.6.1.4.1.161.19.3.3.2.145
Syntax: INTEGER
Constraints:
0: filterOff
1: filterOn

Access: read-write
Status: current

To set bootp server sourced packets filter.


boxDeviceType

Object ID: 1.3.6.1.4.1.161.19.3.3.1.6
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

The type of the device.


boxDeviceTypeID

Object ID: 1.3.6.1.4.1.161.19.3.3.1.7
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Device type ID.


boxEncryption

Object ID: 1.3.6.1.4.1.161.19.3.3.1.8
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Device encryption type.


boxFrequency

Object ID: 1.3.6.1.4.1.161.19.3.3.1.10
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Frequency band of the device.


boxTemperature

Object ID: 1.3.6.1.4.1.161.19.3.3.1.5
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: obsolete

Radio temperature.


boxTemperatureC

Object ID: 1.3.6.1.4.1.161.19.3.3.1.35
Syntax: INTEGER
Access: read-only
Status: current

Radio temperature in Celsius.


boxTemperatureF

Object ID: 1.3.6.1.4.1.161.19.3.3.1.36
Syntax: INTEGER
Access: read-only
Status: current

Radio temperature in Fahrenheit.


bridgeCbErrStatAPFecQSend

Object ID: 1.3.6.1.4.1.161.19.3.3.1.57
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Bridge CB Error Stats APFecQSend


bridgeCbErrStatApRfQSend

Object ID: 1.3.6.1.4.1.161.19.3.3.1.58
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Bridge CB Error Stats ApRfQSend


bridgeCbErrStatBridgeFull

Object ID: 1.3.6.1.4.1.161.19.3.3.1.55
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Bridge CB Error Stats BridgeFull


bridgeCbErrStatNI1QSend

Object ID: 1.3.6.1.4.1.161.19.3.3.1.53
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Bridge CB Error Stats ErrNI1QSend


bridgeCbErrStatNI2QSend

Object ID: 1.3.6.1.4.1.161.19.3.3.1.54
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Bridge CB Error Stats ErrNI2QSend


bridgeCbErrStatSendMsg

Object ID: 1.3.6.1.4.1.161.19.3.3.1.56
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Bridge CB Error Stats SendMsg


bridgeCbFecStatbin

Object ID: 1.3.6.1.4.1.161.19.3.3.1.37
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Bridge CB FEC Stats bin


bridgeCbFecStatbout

Object ID: 1.3.6.1.4.1.161.19.3.3.1.38
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Bridge CB FEC Stats bout


bridgeCbFecStatbtoss

Object ID: 1.3.6.1.4.1.161.19.3.3.1.39
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Bridge CB FEC Stats btoss


bridgeCbFecStatbtosscap

Object ID: 1.3.6.1.4.1.161.19.3.3.1.40
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Bridge CB FEC Stats btosscap


bridgeCbFecStatfloods

Object ID: 1.3.6.1.4.1.161.19.3.3.1.112
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Bridge CB RF Stats Floods (Multipoint AP only)


bridgeCbFecStatuin

Object ID: 1.3.6.1.4.1.161.19.3.3.1.41
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Bridge CB FEC Stats uin


bridgeCbFecStatuout

Object ID: 1.3.6.1.4.1.161.19.3.3.1.42
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Bridge CB FEC Stats uout


bridgeCbFecStatutoss

Object ID: 1.3.6.1.4.1.161.19.3.3.1.43
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Bridge CB FEC Stats utoss


bridgeCbFecStatutosscap

Object ID: 1.3.6.1.4.1.161.19.3.3.1.44
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Bridge CB FEC Stats utosscap


bridgeCbRFStatbin

Object ID: 1.3.6.1.4.1.161.19.3.3.1.45
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Bridge CB RF Stats bin


bridgeCbRFStatbout

Object ID: 1.3.6.1.4.1.161.19.3.3.1.46
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Bridge CB RF Stats bout


bridgeCbRFStatbtoss

Object ID: 1.3.6.1.4.1.161.19.3.3.1.47
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Bridge CB RF Stats btoss


bridgeCbRFStatbtosscap

Object ID: 1.3.6.1.4.1.161.19.3.3.1.48
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Bridge CB RF Stats btosscap


bridgeCbRFStatfloods

Object ID: 1.3.6.1.4.1.161.19.3.3.1.113
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Bridge CB RF Stats Floods (Multipoint AP only)


bridgeCbRFStatuin

Object ID: 1.3.6.1.4.1.161.19.3.3.1.49
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Bridge CB RF Stats uin


bridgeCbRFStatuout

Object ID: 1.3.6.1.4.1.161.19.3.3.1.50
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Bridge CB RF Stats uout


bridgeCbRFStatutoss

Object ID: 1.3.6.1.4.1.161.19.3.3.1.51
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Bridge CB RF Stats utoss


bridgeCbRFStatutosscap

Object ID: 1.3.6.1.4.1.161.19.3.3.1.52
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Bridge CB RF Stats utosscap


bridgeEnable

Object ID: 1.3.6.1.4.1.161.19.3.3.2.24
Syntax: INTEGER
Constraints:
0: enable
1: disable

Access: read-write
Status: current

Disable or enable bridging functionality for a BH unit.


bridgeEntryTimeout

Object ID: 1.3.6.1.4.1.161.19.3.3.2.8
Syntax: INTEGER
Constraints: 25..1440
Access: read-write
Status: current

Bridge table time out Range : 25 -- 1440 Minutes.


calibrationStatusBool

Object ID: 1.3.6.1.4.1.161.19.3.3.1.109
Syntax: INTEGER
Constraints:
0: notCalibrated
1: calibrated

Access: read-only
Status: current

Boolean OID to show if device is calibrated.
Applicable to FSK and MIMO radios only.


calibrationStatusBox

Object ID: 1.3.6.1.4.1.161.19.3.3.1.110
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

String to show if radio is calibrated.
Applicable to FSK and MIMO radios only.


catalinaGainRxCH1

Object ID: 1.3.6.1.4.1.161.19.3.3.1.114
Syntax: INTEGER
Access: read-only
Status: current

Rcv Gain on Catalina Rx CH1


catalinaGainRxCH2

Object ID: 1.3.6.1.4.1.161.19.3.3.1.115
Syntax: INTEGER
Access: read-only
Status: current

Rcv Gain on Catalina Rx CH2


changeUsrPwd

Object ID: 1.3.6.1.4.1.161.19.3.3.2.56
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

Allow to change the password of a given user of a given user. Usage: userName,password.


channelBandwidth

Object ID: 1.3.6.1.4.1.161.19.3.3.2.83
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

The current channel bandwidth in MHz.
For use on OFDM Radios only.
Obsoleted for MIMO SMs.


clearBERStats

Object ID: 1.3.6.1.4.1.161.19.3.3.3.5
Syntax: INTEGER
Constraints:
0: doNotClearBERStats
1: clearBERStats

Access: read-write
Status: current

Set to clear the BER statistics by sending a 'clearBERStats'. Value is set back to 'doNotClearBERStats'
When action is complete.


clearEventLog

Object ID: 1.3.6.1.4.1.161.19.3.3.3.3
Syntax: INTEGER
Constraints:
0: notClear
1: clear

Access: read-write
Status: current

Setting the variable to 1 will clear the event log.


codePoint0

Object ID: 1.3.6.1.4.1.161.19.3.3.9.1
Syntax: INTEGER
Access: read-only
Status: current

Code Point 0.


codePoint1

Object ID: 1.3.6.1.4.1.161.19.3.3.9.2
Syntax: INTEGER
Access: read-write
Status: current

Code Point 1.


codePoint10

Object ID: 1.3.6.1.4.1.161.19.3.3.9.11
Syntax: INTEGER
Access: read-write
Status: current

Code Point 10.


codePoint11

Object ID: 1.3.6.1.4.1.161.19.3.3.9.12
Syntax: INTEGER
Access: read-write
Status: current

Code Point 11.


codePoint12

Object ID: 1.3.6.1.4.1.161.19.3.3.9.13
Syntax: INTEGER
Access: read-write
Status: current

Code Point 12.


codePoint13

Object ID: 1.3.6.1.4.1.161.19.3.3.9.14
Syntax: INTEGER
Access: read-write
Status: current

Code Point 13.


codePoint14

Object ID: 1.3.6.1.4.1.161.19.3.3.9.15
Syntax: INTEGER
Access: read-write
Status: current

Code Point 14.


codePoint15

Object ID: 1.3.6.1.4.1.161.19.3.3.9.16
Syntax: INTEGER
Access: read-write
Status: current

Code Point 15.


codePoint16

Object ID: 1.3.6.1.4.1.161.19.3.3.9.17
Syntax: INTEGER
Access: read-write
Status: current

Code Point 16.


codePoint17

Object ID: 1.3.6.1.4.1.161.19.3.3.9.18
Syntax: INTEGER
Access: read-write
Status: current

Code Point 17.


codePoint18

Object ID: 1.3.6.1.4.1.161.19.3.3.9.19
Syntax: INTEGER
Access: read-write
Status: current

Code Point 18.


codePoint19

Object ID: 1.3.6.1.4.1.161.19.3.3.9.20
Syntax: INTEGER
Access: read-write
Status: current

Code Point 19.


codePoint2

Object ID: 1.3.6.1.4.1.161.19.3.3.9.3
Syntax: INTEGER
Access: read-write
Status: current

Code Point 2.


codePoint20

Object ID: 1.3.6.1.4.1.161.19.3.3.9.21
Syntax: INTEGER
Access: read-write
Status: current

Code Point 20.


codePoint21

Object ID: 1.3.6.1.4.1.161.19.3.3.9.22
Syntax: INTEGER
Access: read-write
Status: current

Code Point 21.


codePoint22

Object ID: 1.3.6.1.4.1.161.19.3.3.9.23
Syntax: INTEGER
Access: read-write
Status: current

Code Point 22.


codePoint23

Object ID: 1.3.6.1.4.1.161.19.3.3.9.24
Syntax: INTEGER
Access: read-write
Status: current

Code Point 23.


codePoint24

Object ID: 1.3.6.1.4.1.161.19.3.3.9.25
Syntax: INTEGER
Access: read-write
Status: current

Code Point 24.


codePoint25

Object ID: 1.3.6.1.4.1.161.19.3.3.9.26
Syntax: INTEGER
Access: read-write
Status: current

Code Point 25.


codePoint26

Object ID: 1.3.6.1.4.1.161.19.3.3.9.27
Syntax: INTEGER
Access: read-write
Status: current

Code Point 26.


codePoint27

Object ID: 1.3.6.1.4.1.161.19.3.3.9.28
Syntax: INTEGER
Access: read-write
Status: current

Code Point 27.


codePoint28

Object ID: 1.3.6.1.4.1.161.19.3.3.9.29
Syntax: INTEGER
Access: read-write
Status: current

Code Point 28.


codePoint29

Object ID: 1.3.6.1.4.1.161.19.3.3.9.30
Syntax: INTEGER
Access: read-write
Status: current

Code Point 29.


codePoint3

Object ID: 1.3.6.1.4.1.161.19.3.3.9.4
Syntax: INTEGER
Access: read-write
Status: current

Code Point 3.


codePoint30

Object ID: 1.3.6.1.4.1.161.19.3.3.9.31
Syntax: INTEGER
Access: read-write
Status: current

Code Point 30.


codePoint31

Object ID: 1.3.6.1.4.1.161.19.3.3.9.32
Syntax: INTEGER
Access: read-write
Status: current

Code Point 31.


codePoint32

Object ID: 1.3.6.1.4.1.161.19.3.3.9.33
Syntax: INTEGER
Access: read-write
Status: current

Code Point 32.


codePoint33

Object ID: 1.3.6.1.4.1.161.19.3.3.9.34
Syntax: INTEGER
Access: read-write
Status: current

Code Point 33.


codePoint34

Object ID: 1.3.6.1.4.1.161.19.3.3.9.35
Syntax: INTEGER
Access: read-write
Status: current

Code Point 34.


codePoint35

Object ID: 1.3.6.1.4.1.161.19.3.3.9.36
Syntax: INTEGER
Access: read-write
Status: current

Code Point 35.


codePoint36

Object ID: 1.3.6.1.4.1.161.19.3.3.9.37
Syntax: INTEGER
Access: read-write
Status: current

Code Point 36.


codePoint37

Object ID: 1.3.6.1.4.1.161.19.3.3.9.38
Syntax: INTEGER
Access: read-write
Status: current

Code Point 37.


codePoint38

Object ID: 1.3.6.1.4.1.161.19.3.3.9.39
Syntax: INTEGER
Access: read-write
Status: current

Code Point 38.


codePoint39

Object ID: 1.3.6.1.4.1.161.19.3.3.9.40
Syntax: INTEGER
Access: read-write
Status: current

Code Point 39.


codePoint4

Object ID: 1.3.6.1.4.1.161.19.3.3.9.5
Syntax: INTEGER
Access: read-write
Status: current

Code Point 4.


codePoint40

Object ID: 1.3.6.1.4.1.161.19.3.3.9.41
Syntax: INTEGER
Access: read-write
Status: current

Code Point 40.


codePoint41

Object ID: 1.3.6.1.4.1.161.19.3.3.9.42
Syntax: INTEGER
Access: read-write
Status: current

Code Point 41.


codePoint42

Object ID: 1.3.6.1.4.1.161.19.3.3.9.43
Syntax: INTEGER
Access: read-write
Status: current

Code Point 42.


codePoint43

Object ID: 1.3.6.1.4.1.161.19.3.3.9.44
Syntax: INTEGER
Access: read-write
Status: current

Code Point 43.


codePoint44

Object ID: 1.3.6.1.4.1.161.19.3.3.9.45
Syntax: INTEGER
Access: read-write
Status: current

Code Point 44.


codePoint45

Object ID: 1.3.6.1.4.1.161.19.3.3.9.46
Syntax: INTEGER
Access: read-write
Status: current

Code Point 45.


codePoint46

Object ID: 1.3.6.1.4.1.161.19.3.3.9.47
Syntax: INTEGER
Access: read-write
Status: current

Code Point 46.


codePoint47

Object ID: 1.3.6.1.4.1.161.19.3.3.9.48
Syntax: INTEGER
Access: read-write
Status: current

Code Point 47.


codePoint48

Object ID: 1.3.6.1.4.1.161.19.3.3.9.49
Syntax: INTEGER
Access: read-only
Status: current

Code Point 48.


codePoint49

Object ID: 1.3.6.1.4.1.161.19.3.3.9.50
Syntax: INTEGER
Access: read-write
Status: current

Code Point 49.


codePoint5

Object ID: 1.3.6.1.4.1.161.19.3.3.9.6
Syntax: INTEGER
Access: read-write
Status: current

Code Point 5.


codePoint50

Object ID: 1.3.6.1.4.1.161.19.3.3.9.51
Syntax: INTEGER
Access: read-write
Status: current

Code Point 50.


codePoint51

Object ID: 1.3.6.1.4.1.161.19.3.3.9.52
Syntax: INTEGER
Access: read-write
Status: current

Code Point 51.


codePoint52

Object ID: 1.3.6.1.4.1.161.19.3.3.9.53
Syntax: INTEGER
Access: read-write
Status: current

Code Point 52.


codePoint53

Object ID: 1.3.6.1.4.1.161.19.3.3.9.54
Syntax: INTEGER
Access: read-write
Status: current

Code Point 53.


codePoint54

Object ID: 1.3.6.1.4.1.161.19.3.3.9.55
Syntax: INTEGER
Access: read-write
Status: current

Code Point 54.


codePoint55

Object ID: 1.3.6.1.4.1.161.19.3.3.9.56
Syntax: INTEGER
Access: read-write
Status: current

Code Point 55.


codePoint56

Object ID: 1.3.6.1.4.1.161.19.3.3.9.57
Syntax: INTEGER
Access: read-only
Status: current

Code Point 56.


codePoint57

Object ID: 1.3.6.1.4.1.161.19.3.3.9.58
Syntax: INTEGER
Access: read-write
Status: current

Code Point 57.


codePoint58

Object ID: 1.3.6.1.4.1.161.19.3.3.9.59
Syntax: INTEGER
Access: read-write
Status: current

Code Point 58.


codePoint59

Object ID: 1.3.6.1.4.1.161.19.3.3.9.60
Syntax: INTEGER
Access: read-write
Status: current

Code Point 59.


codePoint6

Object ID: 1.3.6.1.4.1.161.19.3.3.9.7
Syntax: INTEGER
Access: read-write
Status: current

Code Point 6.


codePoint60

Object ID: 1.3.6.1.4.1.161.19.3.3.9.61
Syntax: INTEGER
Access: read-write
Status: current

Code Point 60.


codePoint61

Object ID: 1.3.6.1.4.1.161.19.3.3.9.62
Syntax: INTEGER
Access: read-write
Status: current

Code Point 61.


codePoint62

Object ID: 1.3.6.1.4.1.161.19.3.3.9.63
Syntax: INTEGER
Access: read-write
Status: current

Code Point 62.


codePoint63

Object ID: 1.3.6.1.4.1.161.19.3.3.9.64
Syntax: INTEGER
Access: read-write
Status: current

Code Point 63.


codePoint7

Object ID: 1.3.6.1.4.1.161.19.3.3.9.8
Syntax: INTEGER
Access: read-write
Status: current

Code Point 7.


codePoint8

Object ID: 1.3.6.1.4.1.161.19.3.3.9.9
Syntax: INTEGER
Access: read-write
Status: current

Code Point 8.


codePoint9

Object ID: 1.3.6.1.4.1.161.19.3.3.9.10
Syntax: INTEGER
Access: read-write
Status: current

Code Point 9.


colorCode

Object ID: 1.3.6.1.4.1.161.19.3.3.2.2
Syntax: INTEGER
Constraints: 0..254
Access: read-write
Status: current

Color code.


commStringROnly

Object ID: 1.3.6.1.4.1.161.19.3.3.2.79
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

Set Read Only commnunity string.


commStringRWrite

Object ID: 1.3.6.1.4.1.161.19.3.3.2.36
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

Read/Write Community string. This is a write-only OID.


controlMessages

Object ID: 1.3.6.1.4.1.161.19.3.3.2.250
Syntax: INTEGER
Constraints:
0: mimoa
1: siso

Access: read-write
Status: current

Control MIMO Rate Adapt Algorithm
0 = MIMO-A
1 = SISO
Engineering use only.


cyclicPrefix

Object ID: 1.3.6.1.4.1.161.19.3.3.2.81
Syntax: INTEGER
Constraints:
0: one-quarter
1: one-eighth
2: one-sixteenth
3: one-quarter-one-eighth
4: one-quarter-one-sixteenth
5: one-eighth-one-sixteenth
6: one-quarter-one-eighth-one-sixteenth

Access: read-write
Status: current

Cyclic Prefix value, for OFDM Radios only.
Deprecated for MIMO SMs. For PMP 430 SMs, this value is only used while in PMP 430 mode (1/16 is forced in PMP 450 mode).


dataScramblingMethod

Object ID: 1.3.6.1.4.1.161.19.3.3.2.92
Syntax: INTEGER
Constraints:
0: legacyDataScrambling
1: r10DataScrambling

Access: read-only
Status: obsolete

This OID is for OFDM only and is obsolete.


deleteRemarkPriority

Object ID: 1.3.6.1.4.1.161.19.3.3.2.248
Syntax: INTEGER
Constraints: 1..4094
Access: read-write
Status: current

Remove the priority re-marking for this source VID.


deleteRemarkVID

Object ID: 1.3.6.1.4.1.161.19.3.3.2.247
Syntax: INTEGER
Constraints: 1..4094
Access: read-write
Status: current

Remove the VID re-marking for this source VID.


deleteUser

Object ID: 1.3.6.1.4.1.161.19.3.3.2.48
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

User name to remove.


dhcpLanGateway

Object ID: 1.3.6.1.4.1.161.19.3.3.1.15
Syntax: STRING
Constraints: SIZE (4)
Access: read-only
Status: current

LAN interface Gateway obtained through DHCP.


dhcpLanIp

Object ID: 1.3.6.1.4.1.161.19.3.3.1.13
Syntax: STRING
Constraints: SIZE (4)
Access: read-only
Status: current

LAN interface IP obtained through DHCP.


dhcpLanSubnetMask

Object ID: 1.3.6.1.4.1.161.19.3.3.1.14
Syntax: STRING
Constraints: SIZE (4)
Access: read-only
Status: current

LAN interface Subnet Mask obtained through DHCP.


dhcpRfPublicGateway

Object ID: 1.3.6.1.4.1.161.19.3.3.1.18
Syntax: STRING
Constraints: SIZE (4)
Access: read-only
Status: current

RF Public interface Gateway obtained through DHCP.


dhcpRfPublicIp

Object ID: 1.3.6.1.4.1.161.19.3.3.1.16
Syntax: STRING
Constraints: SIZE (4)
Access: read-only
Status: current

RF Public interface IP obtained through DHCP.


dhcpRfPublicSubnetMask

Object ID: 1.3.6.1.4.1.161.19.3.3.1.17
Syntax: STRING
Constraints: SIZE (4)
Access: read-only
Status: current

RF Public interface Subnet Mask obtained through DHCP.


displayOnlyAccess

Object ID: 1.3.6.1.4.1.161.19.3.3.2.3
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: obsolete

This variable is deprecated.


dnsAlternateMgmtIP

Object ID: 1.3.6.1.4.1.161.19.3.3.13.3
Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

Secondary DNS IP address for the management interface.


dnsIpState

Object ID: 1.3.6.1.4.1.161.19.3.3.13.1
Syntax: INTEGER
Constraints:
0: manual
1: automatic

Access: read-write
Status: current

Configuration for DNS server IP addresses of the management interface are learned:
0 : Manual, must configure dnsPrimaryMgmtIP and dnsAlternateMgmtIP
1 : Automatic, DNS servers IP addresses are learned from DHCP response of the interface


dnsMgmtDomainName

Object ID: 1.3.6.1.4.1.161.19.3.3.13.4
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

Domain Name to use for management DNS configuration. This domain name may
be concatonated to DNS names used configured for the management interface.


dnsPrimaryMgmtIP

Object ID: 1.3.6.1.4.1.161.19.3.3.13.2
Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

Primary DNS IP address for the management interface.


dynamicLearning

Object ID: 1.3.6.1.4.1.161.19.3.3.2.16
Syntax: INTEGER
Constraints:
0: disabled
1: enabled

Access: read-write
Status: current

To enable VLAN dynamic learning.


eirp

Object ID: 1.3.6.1.4.1.161.19.3.3.2.15
Syntax: INTEGER
Access: read-write
Status: obsolete

This variable is deprecated.


encryptionConfig

Object ID: 1.3.6.1.4.1.161.19.3.3.2.148
Syntax: INTEGER
Constraints:
0: des
1: aes

Access: read-write
Status: current

For supported radio, set the encryption algorithm to use.
DES by default. Cannot be set if encryption is disabled.


entryIndex

Object ID: 1.3.6.1.4.1.161.19.3.3.10.1.1
Syntax: INTEGER
Constraints: 1..5
Access: read-only
Status: current

User information table index.


entryL2Index

Object ID: 1.3.6.1.4.1.161.19.3.3.11.1.1
Syntax: INTEGER
Constraints: 1..20
Access: read-only
Status: current

Neighbor information table index.


etherLinkStatus

Object ID: 1.3.6.1.4.1.161.19.3.3.1.9
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Ethernet link status.


ethernetLinkSpeed

Object ID: 1.3.6.1.4.1.161.19.3.3.2.80
Syntax: INTEGER
Constraints:
1: forced10H
12: auto100F-100H
13: auto100F-100H-10H
15: auto100F-100H-10F-10H
2: forced10F
3: auto10F-10H
4: forced100H
5: auto100H-10H
63: auto1000F-100F-100H-10F-10H
7: auto100H-10F-10H
8: forced100F

Access: read-write
Status: current

Set/Get Ethernet link speed and duplex settings. Note that the Gigabit options are only valid for boards that support Gigabit speeds.


extFilterDelay

Object ID: 1.3.6.1.4.1.161.19.3.3.2.13
Syntax: INTEGER
Access: read-write
Status: current

External Filters Delay. For 900MHz radios only.


fecCRCError

Object ID: 1.3.6.1.4.1.161.19.3.3.1.223
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Number of packets having CRC Error.


fecCarSenseLost

Object ID: 1.3.6.1.4.1.161.19.3.3.1.229
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Carrier Sense Lost count.


fecEnable

Object ID: 1.3.6.1.4.1.161.19.3.3.2.25
Syntax: INTEGER
Constraints:
0: disable
1: enable

Access: read-write
Status: current

Disable or enable FEC error correction functionality
for multipoint units.


fecEthBusErr

Object ID: 1.3.6.1.4.1.161.19.3.3.1.222
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Ethernet Busy Error Count


fecInDiscardsCount

Object ID: 1.3.6.1.4.1.161.19.3.3.1.94
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

Ethernet in discards count.


fecInDiscardsOverloadCount

Object ID: 1.3.6.1.4.1.161.19.3.3.1.102
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Ethernet in discards overload.


fecInErrorsCount

Object ID: 1.3.6.1.4.1.161.19.3.3.1.95
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

Ethernet in errors count.


fecLateCollision

Object ID: 1.3.6.1.4.1.161.19.3.3.1.226
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Number of packets having late collision.


fecNoCarrier

Object ID: 1.3.6.1.4.1.161.19.3.3.1.230
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

No carrier asserted by external transciever during transmission.


fecOutDiscardsCount

Object ID: 1.3.6.1.4.1.161.19.3.3.1.96
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

Ethernet out discards count.


fecOutDiscardsOverloadCount

Object ID: 1.3.6.1.4.1.161.19.3.3.1.103
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Ethernet out discards overload.


fecOutErrorsCount

Object ID: 1.3.6.1.4.1.161.19.3.3.1.97
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

Ethernet out errors count.


fecRetransLimitExp

Object ID: 1.3.6.1.4.1.161.19.3.3.1.227
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Number of packets whose retransmision limit expired.


fecRxBabErr

Object ID: 1.3.6.1.4.1.161.19.3.3.1.220
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Error count in Babble Receiver.


fecRxFifoNoBuf

Object ID: 1.3.6.1.4.1.161.19.3.3.1.224
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Number of times could not get a buffer from Rx Fifo.


fecRxOverrun

Object ID: 1.3.6.1.4.1.161.19.3.3.1.225
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Number of times Rx Fifo Overrun.


fecStatLinkDetected

Object ID: 1.3.6.1.4.1.161.19.3.3.1.92
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Ethernet link detected count


fecStatLinkLost

Object ID: 1.3.6.1.4.1.161.19.3.3.1.91
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Ethernet link lost count


fecStatUnderSizedToss

Object ID: 1.3.6.1.4.1.161.19.3.3.1.219
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Undersized Toss Count


fecTxHbErr

Object ID: 1.3.6.1.4.1.161.19.3.3.1.221
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Number of packets having Transmit heartbeat error.


fecTxUnderrun

Object ID: 1.3.6.1.4.1.161.19.3.3.1.228
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Number of times Tx queue underrun.


fpgaBuildDate

Object ID: 1.3.6.1.4.1.161.19.3.3.1.107
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Display the entire fpga build date string. (Engineering Only)


fpgaCompileInfo

Object ID: 1.3.6.1.4.1.161.19.3.3.1.106
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Display the fpga compiled attributes. (Engineering Only)


frameType

Object ID: 1.3.6.1.4.1.161.19.3.3.2.19
Syntax: INTEGER
Constraints:
0: allframes
1: taggedonly
2: untaggedonly

Access: read-write
Status: current

Allow only tagged frame.


frequency

Object ID: 1.3.6.1.4.1.161.19.3.3.15.3.1.1
Syntax: INTEGER
Constraints: 0..900000
Access: read-only
Status: current

Frequency.


ftpPort

Object ID: 1.3.6.1.4.1.161.19.3.3.2.150
Syntax: INTEGER
Access: read-write
Status: current

Port used to for FTP. Default is 21.


fullAccess

Object ID: 1.3.6.1.4.1.161.19.3.3.2.4
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

Full access password.


gpsInput

Object ID: 1.3.6.1.4.1.161.19.3.3.2.42
Syntax: INTEGER
Constraints:
0: generateSyncSignal
1: syncToReceivedSignalTimingPort
2: syncToReceivedSignalPowerPort
3: syncToiGPS
4: autoSync
5: autoSyncFreeRun

Access: read-write
Status: current

Values 1, 2, 3 have been deprecated.
(0) Generate AP sync signal.
(1) Deprecated. Sync AP to received signal (Timing Port/UGPS). It will set AutoSync.
(2) Deprecated. Sync AP to received signal (Power Port). It will set AutoSync plus Free Run.
(3) Deprecated. Sync AP using iGPS (Only on devices which support it). It will set AutoSync plus Free Run.
(4) AutoSync.
(5) AutoSync plus Free Run.


height

Object ID: 1.3.6.1.4.1.161.19.3.3.2.90
Syntax: INTEGER
Constraints: -2147483647..2147483647
Access: read-write
Status: current

The height setting of this unit in meters.


hiPriority

Object ID: 1.3.6.1.4.1.161.19.3.3.2.44
Syntax: INTEGER
Constraints:
0: disable
1: enable

Access: read-write
Status: obsolete

Enable Hi Priority Data Queue on BH radios.


httpPort

Object ID: 1.3.6.1.4.1.161.19.3.3.2.151
Syntax: INTEGER
Access: read-write
Status: current

Port used to for HTTP. Default is 80.


hwsCompatibility

Object ID: 1.3.6.1.4.1.161.19.3.3.2.41
Syntax: INTEGER
Constraints:
0: enable
1: disable

Access: read-write
Status: obsolete

If enable, it ensures 6.0 compatibility with HWS.


inSyncCount

Object ID: 1.3.6.1.4.1.161.19.3.3.1.21
Syntax: INTEGER
Access: read-only
Status: current

Counter for number of In Synchronization.


installationColorCode

Object ID: 1.3.6.1.4.1.161.19.3.3.2.123
Syntax: INTEGER
Constraints:
0: disabled
1: enabled

Access: read-write
Status: current

Installation Color Code. Allows non-configured SMs to register to an AP with UCC enabled
in order to facilitate remote provisioning.


interleave

Object ID: 1.3.6.1.4.1.161.19.3.3.2.214
Syntax: INTEGER
Constraints:
0: default
1: disabled
2: enabled

Access: read-write
Status: current

Engineering use only.


ip4MultFilter

Object ID: 1.3.6.1.4.1.161.19.3.3.2.146
Syntax: INTEGER
Constraints:
0: filterOff
1: filterOn

Access: read-write
Status: current

To set IPv4 MultiCast packets filter when
NAT is disabled.


ipv6MultFilter

Object ID: 1.3.6.1.4.1.161.19.3.3.2.165
Syntax: INTEGER
Constraints:
0: filterOff
1: filterOn

Access: read-write
Status: current

To set IPv6 MultiCast packets filter when
NAT is disabled.


ipv6bootpcFilter

Object ID: 1.3.6.1.4.1.161.19.3.3.2.163
Syntax: INTEGER
Constraints:
0: filterOff
1: filterOn

Access: read-write
Status: current

To set IPv6 bootp client sourced packets filter.


ipv6bootpsFilter

Object ID: 1.3.6.1.4.1.161.19.3.3.2.164
Syntax: INTEGER
Constraints:
0: filterOff
1: filterOn

Access: read-write
Status: current

To set IPv6 bootp server sourced packets filter.


ipv6smbFilter

Object ID: 1.3.6.1.4.1.161.19.3.3.2.161
Syntax: INTEGER
Constraints:
0: filterOff
1: filterOn

Access: read-write
Status: current

To set IPv6 SMB packet filter.


ipv6snmpFilter

Object ID: 1.3.6.1.4.1.161.19.3.3.2.162
Syntax: INTEGER
Constraints:
0: filterOff
1: filterOn

Access: read-write
Status: current

To set IPv6 SNMP packet filter.


ism

Object ID: 1.3.6.1.4.1.161.19.3.3.2.43
Syntax: INTEGER
Constraints:
0: disable
1: enable

Access: read-write
Status: current

Enable ISM on 5.7GHz frequency band radios.


lan1DhcpRelease

Object ID: 1.3.6.1.4.1.161.19.3.3.2.201
Syntax: INTEGER
Constraints:
1: releaseIP

Access: read-write
Status: current

Setting the variable to '1' will release LAN1's IP address
and send a DHCP Release Message to the DHCP server.
Applicable only when NAT is disabled.


lan1DhcpRenew

Object ID: 1.3.6.1.4.1.161.19.3.3.2.202
Syntax: INTEGER
Constraints:
1: renewIP

Access: read-write
Status: current

Setting the variable to '1' will renew LAN1's lease time
for its current IP address.
Applicable only when NAT is disabled.


lan3DhcpRelease

Object ID: 1.3.6.1.4.1.161.19.3.3.2.203
Syntax: INTEGER
Constraints:
1: releaseIP

Access: read-write
Status: current

Setting the variable to '1' will release LAN3's (RF Public) IP address
and send a DHCP Release Message to the DHCP server.
Applicable only when NAT is enabled.


lan3DhcpRenew

Object ID: 1.3.6.1.4.1.161.19.3.3.2.204
Syntax: INTEGER
Constraints:
1: renewIP

Access: read-write
Status: current

Setting the variable to '1' will renew LAN3's (RF Public)
lease time for its current IP address.
Applicable only when NAT is enabled.


lanDhcpState

Object ID: 1.3.6.1.4.1.161.19.3.3.2.50
Syntax: INTEGER
Constraints:
0: disabled
1: enabled

Access: read-write
Status: current

To enable or disable LAN Interface DHCP feature.


lanDhcpStatus

Object ID: 1.3.6.1.4.1.161.19.3.3.1.19
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Display LAN interface current DHPC status.


largeVCQ

Object ID: 1.3.6.1.4.1.161.19.3.3.2.87
Syntax: INTEGER
Constraints:
0: disable
1: enable

Access: read-write
Status: current

Enable or disable Large VC Qs for SM or PTP radios. Enable when Uplink is being used for camera video feed.


latitude

Object ID: 1.3.6.1.4.1.161.19.3.3.2.88
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

The latitude setting of this unit in decimal degrees.


linkNegoSpeed

Object ID: 1.3.6.1.4.1.161.19.3.3.2.1
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: obsolete

Link negotiation speeds.
H10BT -- 10 Base T Half Duplex,
F10BT -- 10 Base T Full Duplex,
H100BT -- 100 Base T Half Duplex,
F100BT -- 100 Base T Full Duplex.
Separate the values with comma when doing a set.
e.g. H10BT,F10BT,H100BT,F100BT


lldpBroadcastEnable

Object ID: 1.3.6.1.4.1.161.19.3.3.2.76
Syntax: INTEGER
Constraints:
0: disable
1: enable

Access: read-write
Status: current

To enable Broadcast of LLDP message, if disabled LLDP uses multicast


loginMethod

Object ID: 1.3.6.1.4.1.161.19.3.3.10.1.6
Syntax: INTEGER
Access: read-only
Status: current

User login method.


loginStatus

Object ID: 1.3.6.1.4.1.161.19.3.3.10.1.5
Syntax: INTEGER
Access: read-only
Status: current

User current status.


longitude

Object ID: 1.3.6.1.4.1.161.19.3.3.2.89
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

The longitude setting of this unit in decimal degrees.


mac10VIDMapAddr

Object ID: 1.3.6.1.4.1.161.19.3.3.2.114
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-write
Status: current

MAC Address for Entry 10 in MAC Address VID Mapping Table.


mac10VIDMapPriority

Object ID: 1.3.6.1.4.1.161.19.3.3.2.240
Syntax: INTEGER
Constraints: 0..7
Access: read-write
Status: current

VID priority for Entry 10 in MAC Address VID Mapping Table.


mac10VIDMapPriorityMode

Object ID: 1.3.6.1.4.1.161.19.3.3.2.241
Syntax: INTEGER
Constraints:
0: promote-IP-priority
1: define-priority

Access: read-write
Status: current

VID priority Mode for Entry 10 in MAC Address VID Mapping Table.


mac10VIDMapVid

Object ID: 1.3.6.1.4.1.161.19.3.3.2.115
Syntax: INTEGER
Constraints: 1..4094
Access: read-write
Status: current

VID for Entry 10 in MAC Address VID Mapping Table.


mac1VIDMapAddr

Object ID: 1.3.6.1.4.1.161.19.3.3.2.96
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-write
Status: current

MAC Address for Entry 1 in MAC Address VID Mapping Table.


mac1VIDMapPriority

Object ID: 1.3.6.1.4.1.161.19.3.3.2.222
Syntax: INTEGER
Constraints: 0..7
Access: read-write
Status: current

VID priority for Entry 1 in MAC Address VID Mapping Table.


mac1VIDMapPriorityMode

Object ID: 1.3.6.1.4.1.161.19.3.3.2.223
Syntax: INTEGER
Constraints:
0: promote-IP-priority
1: define-priority

Access: read-write
Status: current

VID priority Mode for Entry 1 in MAC Address VID Mapping Table.


mac1VIDMapVid

Object ID: 1.3.6.1.4.1.161.19.3.3.2.97
Syntax: INTEGER
Constraints: 1..4094
Access: read-write
Status: current

VID for Entry 1 in MAC Address VID Mapping Table.


mac2VIDMapAddr

Object ID: 1.3.6.1.4.1.161.19.3.3.2.98
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-write
Status: current

MAC Address for Entry 2 in MAC Address VID Mapping Table.


mac2VIDMapPriority

Object ID: 1.3.6.1.4.1.161.19.3.3.2.224
Syntax: INTEGER
Constraints: 0..7
Access: read-write
Status: current

VID priority for Entry 2 in MAC Address VID Mapping Table.


mac2VIDMapPriorityMode

Object ID: 1.3.6.1.4.1.161.19.3.3.2.225
Syntax: INTEGER
Constraints:
0: promote-IP-priority
1: define-priority

Access: read-write
Status: current

VID priority Mode for Entry 2 in MAC Address VID Mapping Table.


mac2VIDMapVid

Object ID: 1.3.6.1.4.1.161.19.3.3.2.99
Syntax: INTEGER
Constraints: 1..4094
Access: read-write
Status: current

VID for Entry 2 in MAC Address VID Mapping Table.


mac3VIDMapAddr

Object ID: 1.3.6.1.4.1.161.19.3.3.2.100
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-write
Status: current

MAC Address for Entry 3 in MAC Address VID Mapping Table.


mac3VIDMapPriority

Object ID: 1.3.6.1.4.1.161.19.3.3.2.226
Syntax: INTEGER
Constraints: 0..7
Access: read-write
Status: current

VID priority for Entry 3 in MAC Address VID Mapping Table.


mac3VIDMapPriorityMode

Object ID: 1.3.6.1.4.1.161.19.3.3.2.227
Syntax: INTEGER
Constraints:
0: promote-IP-priority
1: define-priority

Access: read-write
Status: current

VID priority Mode for Entry 3 in MAC Address VID Mapping Table.


mac3VIDMapVid

Object ID: 1.3.6.1.4.1.161.19.3.3.2.101
Syntax: INTEGER
Constraints: 1..4094
Access: read-write
Status: current

VID for Entry 3 in MAC Address VID Mapping Table.


mac4VIDMapAddr

Object ID: 1.3.6.1.4.1.161.19.3.3.2.102
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-write
Status: current

MAC Address for Entry 4 in MAC Address VID Mapping Table.


mac4VIDMapPriority

Object ID: 1.3.6.1.4.1.161.19.3.3.2.228
Syntax: INTEGER
Constraints: 0..7
Access: read-write
Status: current

VID priority for Entry 4 in MAC Address VID Mapping Table.


mac4VIDMapPriorityMode

Object ID: 1.3.6.1.4.1.161.19.3.3.2.229
Syntax: INTEGER
Constraints:
0: promote-IP-priority
1: define-priority

Access: read-write
Status: current

VID priority Mode for Entry 4 in MAC Address VID Mapping Table.


mac4VIDMapVid

Object ID: 1.3.6.1.4.1.161.19.3.3.2.103
Syntax: INTEGER
Constraints: 1..4094
Access: read-write
Status: current

VID for Entry 4 in MAC Address VID Mapping Table.


mac5VIDMapAddr

Object ID: 1.3.6.1.4.1.161.19.3.3.2.104
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-write
Status: current

MAC Address for Entry 5 in MAC Address VID Mapping Table.


mac5VIDMapPriority

Object ID: 1.3.6.1.4.1.161.19.3.3.2.230
Syntax: INTEGER
Constraints: 0..7
Access: read-write
Status: current

VID priority for Entry 5 in MAC Address VID Mapping Table.


mac5VIDMapPriorityMode

Object ID: 1.3.6.1.4.1.161.19.3.3.2.231
Syntax: INTEGER
Constraints:
0: promote-IP-priority
1: define-priority

Access: read-write
Status: current

VID priority Mode for Entry 5 in MAC Address VID Mapping Table.


mac5VIDMapVid

Object ID: 1.3.6.1.4.1.161.19.3.3.2.105
Syntax: INTEGER
Constraints: 1..4094
Access: read-write
Status: current

VID for Entry 5 in MAC Address VID Mapping Table.


mac6VIDMapAddr

Object ID: 1.3.6.1.4.1.161.19.3.3.2.106
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-write
Status: current

MAC Address for Entry 6 in MAC Address VID Mapping Table.


mac6VIDMapPriority

Object ID: 1.3.6.1.4.1.161.19.3.3.2.232
Syntax: INTEGER
Constraints: 0..7
Access: read-write
Status: current

VID priority for Entry 6 in MAC Address VID Mapping Table.


mac6VIDMapPriorityMode

Object ID: 1.3.6.1.4.1.161.19.3.3.2.233
Syntax: INTEGER
Constraints:
0: promote-IP-priority
1: define-priority

Access: read-write
Status: current

VID priority Mode for Entry 6 in MAC Address VID Mapping Table.


mac6VIDMapVid

Object ID: 1.3.6.1.4.1.161.19.3.3.2.107
Syntax: INTEGER
Constraints: 1..4094
Access: read-write
Status: current

VID for Entry 6 in MAC Address VID Mapping Table.


mac7VIDMapAddr

Object ID: 1.3.6.1.4.1.161.19.3.3.2.108
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-write
Status: current

MAC Address for Entry 7 in MAC Address VID Mapping Table.


mac7VIDMapPriority

Object ID: 1.3.6.1.4.1.161.19.3.3.2.234
Syntax: INTEGER
Constraints: 0..7
Access: read-write
Status: current

VID priority for Entry 7 in MAC Address VID Mapping Table.


mac7VIDMapPriorityMode

Object ID: 1.3.6.1.4.1.161.19.3.3.2.235
Syntax: INTEGER
Constraints:
0: promote-IP-priority
1: define-priority

Access: read-write
Status: current

VID priority Mode for Entry 7 in MAC Address VID Mapping Table.


mac7VIDMapVid

Object ID: 1.3.6.1.4.1.161.19.3.3.2.109
Syntax: INTEGER
Constraints: 1..4094
Access: read-write
Status: current

VID for Entry 7 in MAC Address VID Mapping Table.


mac8VIDMapAddr

Object ID: 1.3.6.1.4.1.161.19.3.3.2.110
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-write
Status: current

MAC Address for Entry 8 in MAC Address VID Mapping Table.


mac8VIDMapPriority

Object ID: 1.3.6.1.4.1.161.19.3.3.2.236
Syntax: INTEGER
Constraints: 0..7
Access: read-write
Status: current

VID priority for Entry 8 in MAC Address VID Mapping Table.


mac8VIDMapPriorityMode

Object ID: 1.3.6.1.4.1.161.19.3.3.2.237
Syntax: INTEGER
Constraints:
0: promote-IP-priority
1: define-priority

Access: read-write
Status: current

VID priority Mode for Entry 8 in MAC Address VID Mapping Table.


mac8VIDMapVid

Object ID: 1.3.6.1.4.1.161.19.3.3.2.111
Syntax: INTEGER
Constraints: 1..4094
Access: read-write
Status: current

VID for Entry 8 in MAC Address VID Mapping Table.


mac9VIDMapAddr

Object ID: 1.3.6.1.4.1.161.19.3.3.2.112
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-write
Status: current

MAC Address for Entry 9 in MAC Address VID Mapping Table.


mac9VIDMapPriority

Object ID: 1.3.6.1.4.1.161.19.3.3.2.238
Syntax: INTEGER
Constraints: 0..7
Access: read-write
Status: current

VID priority for Entry 9 in MAC Address VID Mapping Table.


mac9VIDMapPriorityMode

Object ID: 1.3.6.1.4.1.161.19.3.3.2.239
Syntax: INTEGER
Constraints:
0: promote-IP-priority
1: define-priority

Access: read-write
Status: current

VID priority Mode for Entry 9 in MAC Address VID Mapping Table.


mac9VIDMapVid

Object ID: 1.3.6.1.4.1.161.19.3.3.2.113
Syntax: INTEGER
Constraints: 1..4094
Access: read-write
Status: current

VID for Entry 9 in MAC Address VID Mapping Table.


managementVID

Object ID: 1.3.6.1.4.1.161.19.3.3.2.17
Syntax: INTEGER
Access: read-write
Status: current

Management VLAN VID.


managementVIDPriority

Object ID: 1.3.6.1.4.1.161.19.3.3.2.242
Syntax: INTEGER
Constraints: 0..7
Access: read-write
Status: current

management VID VID VLAN Priority.


managementVIDPriorityMode

Object ID: 1.3.6.1.4.1.161.19.3.3.2.243
Syntax: INTEGER
Constraints:
0: promote-IP-priority
1: define-priority

Access: read-write
Status: current

management VID VLAN Priority Mode.


mimoRateAdaptAlgorithm

Object ID: 1.3.6.1.4.1.161.19.3.3.2.249
Syntax: INTEGER
Constraints:
0: mimobmimoa
1: mimobonly
2: mimoaonly
3: siso

Access: read-write
Status: current

Engineering use only.
Control MIMO Rate Adapt Algorithm
0 = MIMO-A/B This chooses MIMO-A or MIMO-B dynamically to maximize throughput
1 = MIMO-B only
2 = MIMO-A only
3 = SISO only


mngtIP

Object ID: 1.3.6.1.4.1.161.19.3.3.2.38
Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

Management IP address 1.


mngtIP10

Object ID: 1.3.6.1.4.1.161.19.3.3.2.73
Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

Management IP address 10.


mngtIP2

Object ID: 1.3.6.1.4.1.161.19.3.3.2.57
Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

Management IP address 2.


mngtIP3

Object ID: 1.3.6.1.4.1.161.19.3.3.2.59
Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

Management IP address 3.


mngtIP4

Object ID: 1.3.6.1.4.1.161.19.3.3.2.61
Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

Management IP address 4.


mngtIP5

Object ID: 1.3.6.1.4.1.161.19.3.3.2.63
Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

Management IP address 5.


mngtIP6

Object ID: 1.3.6.1.4.1.161.19.3.3.2.65
Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

Management IP address 6.


mngtIP7

Object ID: 1.3.6.1.4.1.161.19.3.3.2.67
Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

Management IP address 7.


mngtIP8

Object ID: 1.3.6.1.4.1.161.19.3.3.2.69
Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

Management IP address 8.


mngtIP9

Object ID: 1.3.6.1.4.1.161.19.3.3.2.71
Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

Management IP address 9.


natDhcpRelease

Object ID: 1.3.6.1.4.1.161.19.3.3.2.205
Syntax: INTEGER
Constraints:
1: releaseIP

Access: read-write
Status: current

Setting the variable to '1' will release WAN's (NAT Public) IP address
and send a DHCP Release Message to the DHCP server.
Applicable only when NAT is enabled.


natDhcpRenew

Object ID: 1.3.6.1.4.1.161.19.3.3.2.206
Syntax: INTEGER
Constraints:
1: renewIP

Access: read-write
Status: current

Setting the variable to '1' will renew WAN's (NAT Public)
lease time for its current IP address.
Applicable only when NAT is enabled.


natDhcpStatus

Object ID: 1.3.6.1.4.1.161.19.3.3.1.93
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Display NAT Public interface current DHPC status.


neighborIP

Object ID: 1.3.6.1.4.1.161.19.3.3.11.1.3
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Neighbor IP.


neighborMAC

Object ID: 1.3.6.1.4.1.161.19.3.3.11.1.2
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Neighbor MAC.


neighborSiteName

Object ID: 1.3.6.1.4.1.161.19.3.3.11.1.4
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Neighbor Site Name.


numDFSDetections

Object ID: 1.3.6.1.4.1.161.19.3.3.1.33
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Number of DFS/LBT Detections since last boot.


numberCustomFreq

Object ID: 1.3.6.1.4.1.161.19.3.3.2.82
Syntax: INTEGER
Access: read-only
Status: current

Number of custom frequencies added.
There is a maximum of 100.
For use on 3.5 GHz OFDM Radios only.


outSyncCount

Object ID: 1.3.6.1.4.1.161.19.3.3.1.22
Syntax: INTEGER
Access: read-only
Status: current

Counter for number of Out of Synchronization.


packetFilterDirection

Object ID: 1.3.6.1.4.1.161.19.3.3.2.147
Syntax: INTEGER
Constraints:
1: upstream
2: downstream

Access: read-write
Status: current

To set packet filter direction. Upstream is default.


packetOverloadCounter

Object ID: 1.3.6.1.4.1.161.19.3.3.1.29
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Total packet overload count.


pass1Status

Object ID: 1.3.6.1.4.1.161.19.3.3.2.6
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Password 1(display only) status.


pass2Status

Object ID: 1.3.6.1.4.1.161.19.3.3.2.7
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Password 2(full access) status.


pathIndex

Object ID: 1.3.6.1.4.1.161.19.3.3.15.2.1.1
Syntax: INTEGER
Constraints: 0..256
Access: read-only
Status: current

Path Index.


platformInfo

Object ID: 1.3.6.1.4.1.161.19.3.3.1.27
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Platform information.


platformType

Object ID: 1.3.6.1.4.1.161.19.3.3.1.12
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Platform type: Canopy, Canopy Lite, Canopy Lite - Advantage,
Advantage, Russian, Russian - Advantage.


platformVer

Object ID: 1.3.6.1.4.1.161.19.3.3.1.11
Syntax: INTEGER
Access: read-only
Status: current

Hardware platform version. For internal use.


pldVersion

Object ID: 1.3.6.1.4.1.161.19.3.3.1.26
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

PLD version information.


pllOutLockCount

Object ID: 1.3.6.1.4.1.161.19.3.3.1.23
Syntax: INTEGER
Access: read-only
Status: current

Counter for number of PLL out of Lock.


port1TCPFilter

Object ID: 1.3.6.1.4.1.161.19.3.3.2.136
Syntax: INTEGER
Constraints:
0: filterOff
1: filterOn

Access: read-write
Status: current

To set user defined port 1 TCP traffic filter.


port1UDPFilter

Object ID: 1.3.6.1.4.1.161.19.3.3.2.137
Syntax: INTEGER
Constraints:
0: filterOff
1: filterOn

Access: read-write
Status: current

To set user defined port 1 UDP traffic filter.


port2TCPFilter

Object ID: 1.3.6.1.4.1.161.19.3.3.2.139
Syntax: INTEGER
Constraints:
0: filterOff
1: filterOn

Access: read-write
Status: current

To set user defined port 2 TCP traffic filter.


port2UDPFilter

Object ID: 1.3.6.1.4.1.161.19.3.3.2.140
Syntax: INTEGER
Constraints:
0: filterOff
1: filterOn

Access: read-write
Status: current

To set user defined port 2 UDP traffic filter.


port3TCPFilter

Object ID: 1.3.6.1.4.1.161.19.3.3.2.142
Syntax: INTEGER
Constraints:
0: filterOff
1: filterOn

Access: read-write
Status: current

To set user defined port 3 TCP traffic filter.


port3UDPFilter

Object ID: 1.3.6.1.4.1.161.19.3.3.2.143
Syntax: INTEGER
Constraints:
0: filterOff
1: filterOn

Access: read-write
Status: current

To set user defined port 3 UDP traffic filter.


portVID

Object ID: 1.3.6.1.4.1.161.19.3.3.2.93
Syntax: INTEGER
Access: read-write
Status: current

Backhaul Port VID (PVID).


powerControl

Object ID: 1.3.6.1.4.1.161.19.3.3.2.12
Syntax: INTEGER
Constraints:
0: low
1: normal

Access: read-write
Status: current

Power control.


pppoeCtlPriority

Object ID: 1.3.6.1.4.1.161.19.3.3.2.149
Syntax: INTEGER
Constraints:
0: normal
1: high

Access: read-write
Status: current

Prioritization of PPPoE Control packets.


pppoeFilter

Object ID: 1.3.6.1.4.1.161.19.3.3.2.125
Syntax: INTEGER
Constraints:
0: filterOff
1: filterOn

Access: read-write
Status: current

To set PPPoE packet filter.


priorityPrecedence

Object ID: 1.3.6.1.4.1.161.19.3.3.2.122
Syntax: INTEGER
Constraints:
0: eight021pThenDiffServ
1: diffservThenEight021p

Access: read-write
Status: current

Allows user to decide if 802.1p or DiffServ priority bits should be used first when making priority decisions.


providerVID

Object ID: 1.3.6.1.4.1.161.19.3.3.2.95
Syntax: INTEGER
Access: read-write
Status: current

Provider VID for QinQ VLAN.


radioConfigIndex

Object ID: 1.3.6.1.4.1.161.19.3.3.16.1.1.1
Syntax: INTEGER
Constraints: 0..256
Access: read-only
Status: current

Radio Config Index.


radioEngKeyed

Object ID: 1.3.6.1.4.1.161.19.3.3.1.111
Syntax: INTEGER
Access: read-only
Status: current

This will be set either as 0 if the engineering key patch is not applied to the radio or 1 if it is applied.


radioFrequencyBand

Object ID: 1.3.6.1.4.1.161.19.3.3.16.1.1.2
Syntax: INTEGER
Constraints:
0: band700
1: band900
10: band5800
11: band5900
12: band6050
2: band2400
3: band3500
4: band3700
5: band4900
6: band5100
7: band5200
8: band5400
9: band5700

Access: read-only
Status: current

Currently configured radio band.


radioIndex

Object ID: 1.3.6.1.4.1.161.19.3.3.15.1.1.1
Syntax: INTEGER
Constraints: 0..256
Access: read-only
Status: current

Radio Index.


radioMSN

Object ID: 1.3.6.1.4.1.161.19.3.3.1.87
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

MSN of the radio.


radioPaths

Object ID: 1.3.6.1.4.1.161.19.3.3.15.1.1.3
Syntax: INTEGER
Constraints: 0..256
Access: read-only
Status: current

Indicates number of paths. For FSK or OFDM (non-MIMO), this is 1.
For MIMO, it can be greater (with a current maximum of 2).


radioRateAdapt

Object ID: 1.3.6.1.4.1.161.19.3.3.2.85
Syntax: INTEGER
Constraints:
0: onex
1: onextwox
10: onextwoxmimoa
11: onextwoxthreexmimoa
12: onextwoxthreexfourxmimoa
2: onextwoxthreex
3: onextwoxthreexfourx
4: onexmimo
5: onextwoxmimo
7: onextwoxfourx
8: onextwoxfourxsixx
9: onextwoxfourxsixxeightx

Access: read-write
Status: current

Rate adaptation parameter
0: 1x No rate adaptation (FSK and SISO OFDM QPSK)
1: 1x/2x (FSK and SISO OFDM 16-QAM)

Following are OFDM only:
2: 1x/2x/3x (SISO OFDM 64-QAM)
3: 1x/2x/3x/4x (SISO OFDM 256-QAM) Engineering only

Following are MIMO OFDM only:
4: 1x MIMO-A (QPSK duplicated on both paths)
5: 1x/2x MIMO-B (QPSK on each path)
7: 1x/2x/4x MIMO-B (16-QAM on each path)
8: 1x/2x/4x/6x MIMO-B (64-QAM on each path)
9: 1x/2x/4x/6x/8x MIMO-B (256-QAM on each path)
10: 1x/2x MIMO-A (16-QAM duplicated on both paths)
11: 1x/2x/3x MIMO-A (64-QAM duplicated on both paths)
12: 1x/2x/3x/4x MIMO-A (256-QAM duplicated on both paths)

For PMP 430 radios this applies to Downlink Rate Adapt only.
Use radioRateAdaptUL for setting uplink rate adapt on PMP 430 radios.
For PMP 450 radios, engineering use only.


radioRateAdaptUL

Object ID: 1.3.6.1.4.1.161.19.3.3.2.94
Syntax: INTEGER
Constraints:
0: onex
1: onextwox
10: onextwoxmimoa
11: onextwoxthreexmimoa
12: onextwoxthreexfourxmimoa
2: onextwoxthreex
3: onextwoxthreexfourx
4: onexmimo
5: onextwoxmimo
7: onextwoxfourx
8: onextwoxfourxsixx
9: onextwoxfourxsixxeightx

Access: read-write
Status: current

Uplink Rate adaptation parameter
0: 1x No rate adaptation (FSK and SISO OFDM QPSK)
1: 1x/2x (FSK and SISO OFDM 16-QAM)

Following are OFDM only:
2: 1x/2x/3x (SISO OFDM 64-QAM)
3: 1x/2x/3x/4x (SISO OFDM 256-QAM) Engineering only

Following are MIMO OFDM only:
4: 1x MIMO-A (QPSK duplicated on both paths)
5: 1x/2x MIMO-B (QPSK on each path)
7: 1x/2x/4x MIMO-B (16-QAM on each path)
8: 1x/2x/4x/6x MIMO-B (64-QAM on each path)
9: 1x/2x/4x/6x/8x MIMO-B (256-QAM on each path)
10: 1x/2x MIMO-A (16-QAM duplicated on both paths)
11: 1x/2x/3x MIMO-A (64-QAM duplicated on both paths)
12: 1x/2x/3x/4x MIMO-A (256-QAM duplicated on both paths)

For PMP 430 radios this applies to Uplink Rate Adapt only.
Use radioRateAdapt for setting downlink rate adapt on PMP 430 radios.
For PMP 450 radios, engineering use only.


radioType

Object ID: 1.3.6.1.4.1.161.19.3.3.15.1.1.2
Syntax: INTEGER
Constraints:
0: fsk
1: ofdm

Access: read-only
Status: current

Indicates if the radio is FSK or OFDM.


reboot

Object ID: 1.3.6.1.4.1.161.19.3.3.3.2
Syntax: INTEGER
Constraints:
0: finishedReboot
1: reboot

Access: read-write
Status: current

Setting the variable to 1 will reboot the unit. When the
unit finishes rebooting, it will be in finishedReboot state.


rebootIfRequired

Object ID: 1.3.6.1.4.1.161.19.3.3.3.4
Syntax: INTEGER
Constraints:
0: rebootNotRequired
1: rebootRequired

Access: read-write
Status: current

Setting the variable to 1 will reboot the unit if reboot is required.


receiveQualityDebug

Object ID: 1.3.6.1.4.1.161.19.3.3.2.215
Syntax: INTEGER
Constraints:
0: disable
1: enable

Access: read-write
Status: current

Enable or disable receive quality calculations for every packet.
Enabling(1) will calulate receive quality on all receiving packets. Due to load on CPU, will slightly packet per second capabilities on AP/BH.
Default to disabled for all radios.
Only applicable to GenII OFDM products and up.


region

Object ID: 1.3.6.1.4.1.161.19.3.3.2.207
Syntax: INTEGER
Constraints:
0: none
1: otherRegulatory
2: northAmerica
3: europe
4: southAmerica
5: oceania
6: asia
7: africa

Access: read-only
Status: current

Set Region Code for the Unit.


regionAfrica

Object ID: 1.3.6.1.4.1.161.19.3.3.2.217
Syntax: INTEGER
Constraints:
0: none
2: algeria

Access: read-write
Status: current

Country Code for Africa.


regionAsia

Object ID: 1.3.6.1.4.1.161.19.3.3.2.208
Syntax: INTEGER
Constraints:
0: none
2: india
3: indonesia
4: russiacategory1
5: russiacategory2
6: russiacategory3
7: russiacategory4
8: vietnam

Access: read-write
Status: current

Country Code for Asia.


regionCode

Object ID: 1.3.6.1.4.1.161.19.3.3.2.77
Syntax: INTEGER
Constraints:
0: none
1: other
10: indonesia
11: ireland
2: us
3: canada
4: europe
5: brazil
6: australia
7: russia
8: india
9: spain

Access: read-write
Status: deprecated

Set Region Code for the Unit. Used the individual region[Region] OIDs instead.


regionEurope

Object ID: 1.3.6.1.4.1.161.19.3.3.2.209
Syntax: INTEGER
Constraints:
0: none
10: norway
11: portugal
12: switzerland
13: serbia
14: unitedkingdom
2: spain
3: ireland
4: denmark
5: finland
6: germany
7: greece
8: iceland
9: liechtenstein

Access: read-write
Status: current

Country Code for Europe.


regionNorthAmerica

Object ID: 1.3.6.1.4.1.161.19.3.3.2.210
Syntax: INTEGER
Constraints:
0: none
2: unitedStates
3: canada
4: mexico

Access: read-write
Status: current

Country Code for North America.


regionOceania

Object ID: 1.3.6.1.4.1.161.19.3.3.2.211
Syntax: INTEGER
Constraints:
0: none
2: australia

Access: read-write
Status: current

Country Code for Oceania.


regionOtherRegulatory

Object ID: 1.3.6.1.4.1.161.19.3.3.2.213
Syntax: INTEGER
Constraints:
0: none
1: other
2: otherFCC
3: otherETSI

Access: read-write
Status: current

Regulatory setting for governing regulatory body.


regionSouthAmerica

Object ID: 1.3.6.1.4.1.161.19.3.3.2.212
Syntax: INTEGER
Constraints:
0: none
2: brazil

Access: read-write
Status: current

Country Code for South America.


remarkPriority

Object ID: 1.3.6.1.4.1.161.19.3.3.17.1.5
Syntax: INTEGER
Constraints: 0..7
Access: read-only
Status: current

Remark Priority.


remarkPriorityState

Object ID: 1.3.6.1.4.1.161.19.3.3.17.1.4
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Remark Priority State.


remarkSrcVID

Object ID: 1.3.6.1.4.1.161.19.3.3.2.244
Syntax: INTEGER
Constraints: 1..4094
Access: read-write
Status: current

Source VID to apply remarking on.


remarkVID

Object ID: 1.3.6.1.4.1.161.19.3.3.17.1.3
Syntax: INTEGER
Constraints: 0..4094
Access: read-only
Status: current

Remark VID.


remarkVIDState

Object ID: 1.3.6.1.4.1.161.19.3.3.17.1.2
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Remark VID State.


removeCustomFreqList

Object ID: 1.3.6.1.4.1.161.19.3.3.2.54
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

Remove Custom Frequencies.
Frequencies can be removed in a list separated by commas. Example: 355000, 345000
A get will return the current custom frequencies.
For use on 3.5 GHz OFDM Radios only.


removeCustomFreqMimo

Object ID: 1.3.6.1.4.1.161.19.3.3.2.219
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

Frequency input ie) 3700.50. Deprecated, please use 'removeCustomFreqList'.


removeVlanMember

Object ID: 1.3.6.1.4.1.161.19.3.3.2.21
Syntax: INTEGER
Access: read-write
Status: current

Remove VLAN memeber.


rfInDiscardsCount

Object ID: 1.3.6.1.4.1.161.19.3.3.1.98
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

RF in discards count.


rfInDiscardsOverloadCount

Object ID: 1.3.6.1.4.1.161.19.3.3.1.104
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Rf in discards overload.


rfInErrorsCount

Object ID: 1.3.6.1.4.1.161.19.3.3.1.99
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

RF in errors count.


rfOutDiscardsCount

Object ID: 1.3.6.1.4.1.161.19.3.3.1.100
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

RF out discards count.


rfOutDiscardsOverloadCount

Object ID: 1.3.6.1.4.1.161.19.3.3.1.105
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Rf out discards overload.


rfOutErrorsCount

Object ID: 1.3.6.1.4.1.161.19.3.3.1.101
Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

RF out errors count.


rfPublicDhcpStatus

Object ID: 1.3.6.1.4.1.161.19.3.3.1.20
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Display RF Public interface current DHPC status.


rfStatBadBcastCtlCnt

Object ID: 1.3.6.1.4.1.161.19.3.3.1.70
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats Bad Broadcast Control Count


rfStatBadFreqBcnRcvCnt

Object ID: 1.3.6.1.4.1.161.19.3.3.1.73
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats Wrong Frequency Beacon Received Count


rfStatBadInSyncIDRcv

Object ID: 1.3.6.1.4.1.161.19.3.3.1.78
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats Bad In Sync ID Received Count


rfStatBeaconVerMismatchCnt

Object ID: 1.3.6.1.4.1.161.19.3.3.1.72
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats Beacon version Mismatch Count


rfStatInSyncCount

Object ID: 1.3.6.1.4.1.161.19.3.3.1.65
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats In Sync Count


rfStatOutSyncCount

Object ID: 1.3.6.1.4.1.161.19.3.3.1.66
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats Out Sync Count


rfStatOverrunCount

Object ID: 1.3.6.1.4.1.161.19.3.3.1.67
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats Overrun Count


rfStatPLLOutOfLockCnt

Object ID: 1.3.6.1.4.1.161.19.3.3.1.71
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats PLL Out of Lock Count


rfStatRSSIOutOfRange

Object ID: 1.3.6.1.4.1.161.19.3.3.1.80
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats RSSI Out of Range Count


rfStatRangeCapEnf

Object ID: 1.3.6.1.4.1.161.19.3.3.1.81
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats Range Cap Enforced Count


rfStatRcvBDataCnt

Object ID: 1.3.6.1.4.1.161.19.3.3.1.62
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats Receive Broadcast Data Count


rfStatRcvCntlCnt

Object ID: 1.3.6.1.4.1.161.19.3.3.1.64
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats Receive Control Count


rfStatRcvCorruptControlCount

Object ID: 1.3.6.1.4.1.161.19.3.3.1.117
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats Receive Corrupt Control Data Count


rfStatRcvCorruptDataCount

Object ID: 1.3.6.1.4.1.161.19.3.3.1.69
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats Receive Corrupt Data Count


rfStatRcvLTResult

Object ID: 1.3.6.1.4.1.161.19.3.3.1.84
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats Rcv LT Result Count


rfStatRcvLTStart

Object ID: 1.3.6.1.4.1.161.19.3.3.1.82
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats Rcv LT Start Count


rfStatRcvLTStartHS

Object ID: 1.3.6.1.4.1.161.19.3.3.1.83
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats Rcv LT Start HS Count


rfStatRcvMDataCnt

Object ID: 1.3.6.1.4.1.161.19.3.3.1.218
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats Receive Multicast Data Count


rfStatRcvUDataCnt

Object ID: 1.3.6.1.4.1.161.19.3.3.1.61
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats Receive Unicast Data Count


rfStatTempOutOfRange

Object ID: 1.3.6.1.4.1.161.19.3.3.1.79
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats Temperature Out of Range Count


rfStatTxCalFailCnt

Object ID: 1.3.6.1.4.1.161.19.3.3.1.77
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats TX Calibration Failures Count


rfStatUnderrunCount

Object ID: 1.3.6.1.4.1.161.19.3.3.1.68
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats Underrun Count


rfStatUnkwnFeatBcnRcvCnt

Object ID: 1.3.6.1.4.1.161.19.3.3.1.76
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats Unknown Feature Beacon Received Count


rfStatUnsupFeatBcnRcvCnt

Object ID: 1.3.6.1.4.1.161.19.3.3.1.75
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats Unsupported Feature Beacon Received Count


rfStatXmtBDataCnt

Object ID: 1.3.6.1.4.1.161.19.3.3.1.60
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats Transmit Broadcast Data Count


rfStatXmtCntlCnt

Object ID: 1.3.6.1.4.1.161.19.3.3.1.63
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats Transmit Control Count


rfStatXmtLTResult

Object ID: 1.3.6.1.4.1.161.19.3.3.1.85
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats Xmt LT Result Count


rfStatXmtMDataCnt

Object ID: 1.3.6.1.4.1.161.19.3.3.1.217
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats Transmit Multicast Data Count


rfStatXmtUDataCnt

Object ID: 1.3.6.1.4.1.161.19.3.3.1.59
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats Transmit Unicast Data Count


rfStatnonLiteBcnRcvCnt

Object ID: 1.3.6.1.4.1.161.19.3.3.1.74
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

RF Scheduler Stats Non Lite Beacon Received Count


russiaRegion

Object ID: 1.3.6.1.4.1.161.19.3.3.2.78
Syntax: INTEGER
Constraints:
1: category1
2: category2
3: category3
4: category4

Access: read-write
Status: deprecated

Set Category Region for Russian 5.9/6.05 GHz Radio Only. Use setting under regionAsia now.


rxOverrunPkts

Object ID: 1.3.6.1.4.1.161.19.3.3.1.34
Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

Counter for number of received overrun packets error.


saveFlash

Object ID: 1.3.6.1.4.1.161.19.3.3.3.1
Syntax: INTEGER
Constraints:
0: doNotSaveToFlash
1: saveToFlash

Access: read-write
Status: obsolete

This variable is currently deprecated.


scheduling

Object ID: 1.3.6.1.4.1.161.19.3.3.2.22
Syntax: INTEGER
Constraints:
1: hardware

Access: read-write
Status: current

To use hardware or software scheduling


sessionTime

Object ID: 1.3.6.1.4.1.161.19.3.3.10.1.7
Syntax: INTEGER
Access: read-only
Status: current

Users logged in session time.


sessionTimeout

Object ID: 1.3.6.1.4.1.161.19.3.3.2.51
Syntax: INTEGER
Access: read-write
Status: current

Timer for Telnet, Web and FTP sessions.


setDefaultPlug

Object ID: 1.3.6.1.4.1.161.19.3.3.2.40
Syntax: INTEGER
Constraints:
0: disable
1: enable

Access: read-write
Status: current

If enable parameters are set to Factory Defaults upon default plug detection.


setDefaults

Object ID: 1.3.6.1.4.1.161.19.3.3.2.84
Syntax: INTEGER
Constraints:
0: noChangeOrUndoFactoryDefaults
1: setToFactoryDefaults
2: factoryDefaultsSet-AwaitingReboot

Access: read-write
Status: current

Setting this to 1 will set the radio to Factory Defaults after the next reboot. Setting this to 0
will undo Factory Defaults if and only if Factory Defaults have been set previously without rebooting.
Reading this OID will return 0 if Factory Defaults are not set, or a 2 if Factory Defaults are set and
we are now awaiting a reboot. NOTE: this operation is reversible as long as you write a 0 to this OID
prior to reboot. As a security measure, this OID is only valid when the radio was booted with the default
plug inserted. If the default plug was not inserted on boot, then attempting to set this OID will fail.


siteInfoViewable

Object ID: 1.3.6.1.4.1.161.19.3.3.2.86
Syntax: INTEGER
Constraints:
0: disable
1: enable

Access: read-write
Status: current

Enable non login users the ability to view Site Information


smbFilter

Object ID: 1.3.6.1.4.1.161.19.3.3.2.126
Syntax: INTEGER
Constraints:
0: filterOff
1: filterOn

Access: read-write
Status: current

To set SMB packet filter.


snmpFilter

Object ID: 1.3.6.1.4.1.161.19.3.3.2.127
Syntax: INTEGER
Constraints:
0: filterOff
1: filterOn

Access: read-write
Status: current

To set SNMP packet filter.


snmpMibPerm

Object ID: 1.3.6.1.4.1.161.19.3.3.2.9
Syntax: INTEGER
Constraints:
0: readWrite
1: readOnly

Access: read-write
Status: current

Read/Write permission for MIB groups.


snmpPort

Object ID: 1.3.6.1.4.1.161.19.3.3.2.153
Syntax: INTEGER
Access: read-write
Status: current

Port used to for SNMP. Default is 161.


snmpTrapPort

Object ID: 1.3.6.1.4.1.161.19.3.3.2.154
Syntax: INTEGER
Access: read-write
Status: current

Port used to for SNMP Traps. Default is 162.


snrCalculation

Object ID: 1.3.6.1.4.1.161.19.3.3.2.121
Syntax: INTEGER
Constraints:
0: disable
1: enable

Access: read-write
Status: deprecated

This OID is deprecated. Receive quality calulation is always on since it no longer affects packet per second performance.


sourceVID

Object ID: 1.3.6.1.4.1.161.19.3.3.17.1.1
Syntax: INTEGER
Constraints: 1..4094
Access: read-only
Status: current

Source VLAN ID.


spectrumAnalysisActionBox

Object ID: 1.3.6.1.4.1.161.19.3.3.2.221
Syntax: INTEGER
Constraints:
0: stopSpectrumAnalysis
1: startTimedSpectrumAnalysis
2: startContinuousSpectrumAnalysis
3: idleNoSpectrumAnalysis
4: idleCompleteSpectrumAnalysis
5: inProgressTimedSpectrumAnalysis
6: inProgressContinuousSpectrumAnalysis
7: notReady

Access: read-write
Status: current

Start or stop timed or continuous Spectrum Analysis and also give status.
(0) - Stop Spectrum Analysis
(1) - Start Timed Spectrum Analysis
(2) - Start Continuous Spectrum Analysis
(3) - Idle, no Spectrum Analysis results.
(4) - Idle, Spectrum Analysis results available.
(5) - Timed or Remote Spectrum Analysis in progress.
(6) - Continuous Spectrum Analysis in progress.
Note: Continuous mode has a max of 24 hours.
(7) - Spectrum Analyzer not ready.


subnetMask

Object ID: 1.3.6.1.4.1.161.19.3.3.2.37
Syntax: INTEGER
Access: read-write
Status: current

Subnet mask for the management IP 1.


subnetMask10

Object ID: 1.3.6.1.4.1.161.19.3.3.2.74
Syntax: INTEGER
Access: read-write
Status: current

Subnet mask for the management IP 10.


subnetMask2

Object ID: 1.3.6.1.4.1.161.19.3.3.2.58
Syntax: INTEGER
Access: read-write
Status: current

Subnet mask for the management IP 2.


subnetMask3

Object ID: 1.3.6.1.4.1.161.19.3.3.2.60
Syntax: INTEGER
Access: read-write
Status: current

Subnet mask for the management IP 3.


subnetMask4

Object ID: 1.3.6.1.4.1.161.19.3.3.2.62
Syntax: INTEGER
Access: read-write
Status: current

Subnet mask for the management IP 4.


subnetMask5

Object ID: 1.3.6.1.4.1.161.19.3.3.2.64
Syntax: INTEGER
Access: read-write
Status: current

Subnet mask for the management IP 5.


subnetMask6

Object ID: 1.3.6.1.4.1.161.19.3.3.2.66
Syntax: INTEGER
Access: read-write
Status: current

Subnet mask for the management IP 6.


subnetMask7

Object ID: 1.3.6.1.4.1.161.19.3.3.2.68
Syntax: INTEGER
Access: read-write
Status: current

Subnet mask for the management IP 7.


subnetMask8

Object ID: 1.3.6.1.4.1.161.19.3.3.2.70
Syntax: INTEGER
Access: read-write
Status: current

Subnet mask for the management IP 8.


subnetMask9

Object ID: 1.3.6.1.4.1.161.19.3.3.2.72
Syntax: INTEGER
Access: read-write
Status: current

Subnet mask for the management IP 9.


swVersion

Object ID: 1.3.6.1.4.1.161.19.3.3.1.25
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Software version information.


syslogDomainNameAppend

Object ID: 1.3.6.1.4.1.161.19.3.3.2.156
Syntax: INTEGER
Constraints:
0: disableDomain
1: appendDomain

Access: read-write
Status: current

Select whether to append the configured management domain name to
the Syslog server name. For example, if dnsMgmtDomainName is
set to 'example.com', syslogServerAddr is set to 'syslog1', and syslogDomainNameAppend
is set to appendDomain, the Syslog Server name used would be 'syslog1.example.com'.


syslogMinLevel

Object ID: 1.3.6.1.4.1.161.19.3.3.2.159
Syntax: INTEGER
Constraints:
0: fatal
1: alert
2: critical
3: error
4: warning
5: notice
6: info
7: debug

Access: read-write
Status: current

Sets the minimum syslog severity to transmit. Messages with a lower severity value (i.e. numerically higher) than this will not be transmitted.


syslogServerAddr

Object ID: 1.3.6.1.4.1.161.19.3.3.2.157
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

Syslog server address either in dotted decimal notation or a Fully Qualified Domain Name


syslogServerPort

Object ID: 1.3.6.1.4.1.161.19.3.3.2.158
Syntax: INTEGER
Access: read-write
Status: current

Listening port on the Syslog server. Default is 514.


syslogStatDropped

Object ID: 1.3.6.1.4.1.161.19.3.3.1.90
Syntax: INTEGER
Access: read-only
Status: current

Number of dropped syslog messages due to device overload and/or resource limitations.


syslogStatTxSuccesses

Object ID: 1.3.6.1.4.1.161.19.3.3.1.89
Syntax: INTEGER
Access: read-only
Status: current

The count of Syslog messages sent to UDP layer.


timedSpectrumAnalysisDurationBox

Object ID: 1.3.6.1.4.1.161.19.3.3.2.220
Syntax: INTEGER
Constraints: 10..1000
Access: read-write
Status: current

Value in seconds for a timed spectrum analysis. Range is 10-1000 seconds.


transmitterOP

Object ID: 1.3.6.1.4.1.161.19.3.3.2.23
Syntax: INTEGER
Access: read-write
Status: current

Transmitter output power. This is not available on OFDM SMs.


trap1

Object ID: 1.3.6.1.4.1.161.19.3.3.13.6
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

SNMP Trap IP Address 1.
Format is either an IP address or DNS name.


trap10

Object ID: 1.3.6.1.4.1.161.19.3.3.13.15
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

SNMP Trap IP Address 10.
Format is either an IP address or DNS name.


trap2

Object ID: 1.3.6.1.4.1.161.19.3.3.13.7
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

SNMP Trap IP Address 2.
Format is either an IP address or DNS name.


trap3

Object ID: 1.3.6.1.4.1.161.19.3.3.13.8
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

SNMP Trap IP Address 3.
Format is either an IP address or DNS name.


trap4

Object ID: 1.3.6.1.4.1.161.19.3.3.13.9
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

SNMP Trap IP Address 4.
Format is either an IP address or DNS name.


trap5

Object ID: 1.3.6.1.4.1.161.19.3.3.13.10
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

SNMP Trap IP Address 5.
Format is either an IP address or DNS name.


trap6

Object ID: 1.3.6.1.4.1.161.19.3.3.13.11
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

SNMP Trap IP Address 6.
Format is either an IP address or DNS name.


trap7

Object ID: 1.3.6.1.4.1.161.19.3.3.13.12
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

SNMP Trap IP Address 7.
Format is either an IP address or DNS name.


trap8

Object ID: 1.3.6.1.4.1.161.19.3.3.13.13
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

SNMP Trap IP Address 8.
Format is either an IP address or DNS name.


trap9

Object ID: 1.3.6.1.4.1.161.19.3.3.13.14
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

SNMP Trap IP Address 9.
Format is either an IP address or DNS name.


trapDomainNameAppend

Object ID: 1.3.6.1.4.1.161.19.3.3.13.5
Syntax: INTEGER
Constraints:
0: disableDomain
1: appendDomain

Access: read-write
Status: current

Select whether to append the configured management domain name to
the configured trap names. For example, if dnsMgmtDomainName is
set to 'example.com', trap1 is set to 'trap1', and trapDomainNameAppend
is set to appendDomain, the trap1 name used would be 'trap1.example.com'.


trapIP1

Object ID: 1.3.6.1.4.1.161.19.3.3.2.26
Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: obsolete

Obsoleted. Configure with whispBoxDNS.trap1.


trapIP10

Object ID: 1.3.6.1.4.1.161.19.3.3.2.35
Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: obsolete

Obsoleted. Configure with whispBoxDNS.trap10.


trapIP2

Object ID: 1.3.6.1.4.1.161.19.3.3.2.27
Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: obsolete

Obsoleted. Configure with whispBoxDNS.trap2.


trapIP3

Object ID: 1.3.6.1.4.1.161.19.3.3.2.28
Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: obsolete

Obsoleted. Configure with whispBoxDNS.trap3.


trapIP4

Object ID: 1.3.6.1.4.1.161.19.3.3.2.29
Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: obsolete

Obsoleted. Configure with whispBoxDNS.trap4.


trapIP5

Object ID: 1.3.6.1.4.1.161.19.3.3.2.30
Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: obsolete

Obsoleted. Configure with whispBoxDNS.trap5.


trapIP6

Object ID: 1.3.6.1.4.1.161.19.3.3.2.31
Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: obsolete

Obsoleted. Configure with whispBoxDNS.trap6.


trapIP7

Object ID: 1.3.6.1.4.1.161.19.3.3.2.32
Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: obsolete

Obsoleted. Configure with whispBoxDNS.trap7.


trapIP8

Object ID: 1.3.6.1.4.1.161.19.3.3.2.33
Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: obsolete

Obsoleted. Configure with whispBoxDNS.trap8.


trapIP9

Object ID: 1.3.6.1.4.1.161.19.3.3.2.34
Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: obsolete

Obsoleted. Configure with whispBoxDNS.trap9.


twoXRate

Object ID: 1.3.6.1.4.1.161.19.3.3.2.49
Syntax: INTEGER
Constraints:
0: disabled
1: enabled

Access: read-write
Status: obsolete

To enable or disable double rate.


txCalFailure

Object ID: 1.3.6.1.4.1.161.19.3.3.1.24
Syntax: INTEGER
Access: read-only
Status: current

Counter for number of TX Calibration failure.


updateDevice

Object ID: 1.3.6.1.4.1.161.19.3.3.3.6
Syntax: INTEGER
Constraints:
0: disable
1: enable

Access: read-write
Status: current

Use to update the software on the device


updateStatus

Object ID: 1.3.6.1.4.1.161.19.3.3.1.88
Syntax: INTEGER
Access: read-only
Status: current

Current Status of Device Update


userAccessLevel

Object ID: 1.3.6.1.4.1.161.19.3.3.2.47
Syntax: INTEGER
Access: read-write
Status: current

User access level.


userDefinedPort1

Object ID: 1.3.6.1.4.1.161.19.3.3.2.135
Syntax: INTEGER
Access: read-write
Status: current

An integer value of number one user defined port. Range:0-65535


userDefinedPort2

Object ID: 1.3.6.1.4.1.161.19.3.3.2.138
Syntax: INTEGER
Access: read-write
Status: current

An integer value of number two user defined port. Range:0-65535


userDefinedPort3

Object ID: 1.3.6.1.4.1.161.19.3.3.2.141
Syntax: INTEGER
Access: read-write
Status: current

An integer value of number three user defined port. Range:0-65535


userLoginName

Object ID: 1.3.6.1.4.1.161.19.3.3.10.1.2
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

User name.


userName

Object ID: 1.3.6.1.4.1.161.19.3.3.2.45
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

User name.


userP1Filter

Object ID: 1.3.6.1.4.1.161.19.3.3.2.128
Syntax: INTEGER
Constraints:
0: filterOff
1: filterOn

Access: read-write
Status: current

To set user defined port 1 packet filter.


userP2Filter

Object ID: 1.3.6.1.4.1.161.19.3.3.2.129
Syntax: INTEGER
Constraints:
0: filterOff
1: filterOn

Access: read-write
Status: current

To set user defined port 2 packet filter.


userP3Filter

Object ID: 1.3.6.1.4.1.161.19.3.3.2.130
Syntax: INTEGER
Constraints:
0: filterOff
1: filterOn

Access: read-write
Status: current

To set user defined port 3 packet filter.


userPassword

Object ID: 1.3.6.1.4.1.161.19.3.3.2.46
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

User password.


userPswd

Object ID: 1.3.6.1.4.1.161.19.3.3.10.1.3
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

User password.


usrAccountEnableAccounting

Object ID: 1.3.6.1.4.1.161.19.3.3.2.119
Syntax: INTEGER
Constraints:
0: disable
1: deviceAccess
2: dataUsage
3: all

Access: read-write
Status: current

Select the level of accounting information to be reported to the server


vlanAcceptQinQFrames

Object ID: 1.3.6.1.4.1.161.19.3.3.2.117
Syntax: INTEGER
Constraints:
0: disable
1: enable

Access: read-write
Status: current

Allow/Disallow packets already doubly-tagged (QinQ) to ingress the FEC of BHM, BHS, or MP SM. Not configurable on MP AP.


vlanMemberSource

Object ID: 1.3.6.1.4.1.161.19.3.3.2.52
Syntax: INTEGER
Constraints:
0: configured
1: active

Access: read-write
Status: current

Specified the VLAN member source to display. 0=configured, 1=active configuration.
Note that this OID is internal to SNMP and is not available at the Web Interface.


vlanPortType

Object ID: 1.3.6.1.4.1.161.19.3.3.2.116
Syntax: INTEGER
Constraints:
0: q
1: qinq

Access: read-write
Status: current

VLAN Port Type for VLAN interface. Default is Q.


webAutoUpdate

Object ID: 1.3.6.1.4.1.161.19.3.3.2.5
Syntax: INTEGER
Access: read-write
Status: current

Web page auto update in seconds. 0 means disabled.


whispBoxBoot

Object ID: 1.3.6.1.4.1.161.19.3.3.1.4
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Software boot version.


whispBoxBridgeEntry

Object ID: 1.3.6.1.4.1.161.19.3.3.4.1
Syntax: Sequence (Structure)
whispBridgeMacAddr
whispBridgeDesLuid
whispBridgeAge
whispBridgeExt
whispBridgeHash
whispBridgeCAM

Access: not-accessible
Status: current

Bridge entry.


whispBoxBridgeTable

Object ID: 1.3.6.1.4.1.161.19.3.3.4
Syntax: Sequence of Type (Array)
WhispBoxBridgeEntry

Access: not-accessible
Status: current

Bridge table.


whispBoxEsn

Object ID: 1.3.6.1.4.1.161.19.3.3.1.3
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Electronic serial number(MAC address) assigned to Radio.


whispBoxEvntLog

Object ID: 1.3.6.1.4.1.161.19.3.3.5.1
Syntax: OCTET STRING
Constraints: SIZE (0..2048)
Access: read-only
Status: current

Event log for AP and SM.


whispBoxFPGAVer

Object ID: 1.3.6.1.4.1.161.19.3.3.1.2
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Version of FPGA.


whispBoxP11BstrapFPGAVer

Object ID: 1.3.6.1.4.1.161.19.3.3.1.32
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

P11 Bootstrap FPGA Version.


whispBoxP11FPGAType

Object ID: 1.3.6.1.4.1.161.19.3.3.1.31
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

FPGA Type on P11 and P12 radios.


whispBoxP11Personality

Object ID: 1.3.6.1.4.1.161.19.3.3.1.30
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Board Personality Configuration of P11 and P12 radios.


whispBoxRFConfigRadioEntry

Object ID: 1.3.6.1.4.1.161.19.3.3.16.1.1
Syntax: Sequence (Structure)
radioConfigIndex
radioFrequencyBand

Access: not-accessible
Status: current

Radio config table entry.


whispBoxRFConfigRadios

Object ID: 1.3.6.1.4.1.161.19.3.3.16.1
Syntax: Sequence of Type (Array)
WhispBoxRFConfigRadioEntry

Access: not-accessible
Status: current

Radio configuration table.


whispBoxRFPhysicalRadioEntry

Object ID: 1.3.6.1.4.1.161.19.3.3.15.1.1
Syntax: Sequence (Structure)
radioIndex
radioType
radioPaths

Access: not-accessible
Status: current

Radio information table entry.


whispBoxRFPhysicalRadioFrequencies

Object ID: 1.3.6.1.4.1.161.19.3.3.15.3
Syntax: Sequence of Type (Array)
WhispBoxRFPhysicalRadioFrequencyEntry

Access: not-accessible
Status: current

Available frequency information table.


whispBoxRFPhysicalRadioFrequencyEntry

Object ID: 1.3.6.1.4.1.161.19.3.3.15.3.1
Syntax: Sequence (Structure)
frequency

Access: not-accessible
Status: current

Available frequency table entry.


whispBoxRFPhysicalRadioPathEntry

Object ID: 1.3.6.1.4.1.161.19.3.3.15.2.1
Syntax: Sequence (Structure)
pathIndex

Access: not-accessible
Status: current

Radio path table entry.


whispBoxRFPhysicalRadioPaths

Object ID: 1.3.6.1.4.1.161.19.3.3.15.2
Syntax: Sequence of Type (Array)
WhispBoxRFPhysicalRadioPathEntry

Access: not-accessible
Status: current

Radio path information table.


whispBoxRFPhysicalRadios

Object ID: 1.3.6.1.4.1.161.19.3.3.15.1
Syntax: Sequence of Type (Array)
WhispBoxRFPhysicalRadioEntry

Access: not-accessible
Status: current

Radio information table.


whispBoxSoftwareVer

Object ID: 1.3.6.1.4.1.161.19.3.3.1.1
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Version of software. Should be noted in the event customer has
technical difficulties and need to contact technical support.


whispBridgeAge

Object ID: 1.3.6.1.4.1.161.19.3.3.4.1.3
Syntax: INTEGER
Access: read-only
Status: current

Table entry last access age in minutes.


whispBridgeCAM

Object ID: 1.3.6.1.4.1.161.19.3.3.4.1.6
Syntax: INTEGER
Access: read-only
Status: obsolete

This entry is deprecated.


whispBridgeDesLuid

Object ID: 1.3.6.1.4.1.161.19.3.3.4.1.2
Syntax: INTEGER
Constraints: 0..4095
Access: read-only
Status: current

This is the Local Unit Identifier assigned to
Subscriber Modems.


whispBridgeExt

Object ID: 1.3.6.1.4.1.161.19.3.3.4.1.4
Syntax: INTEGER
Access: read-only
Status: current

Timeout extension flag for entries which also
reside in the PNA APR cache.


whispBridgeHash

Object ID: 1.3.6.1.4.1.161.19.3.3.4.1.5
Syntax: INTEGER
Access: read-only
Status: current

Hash table array index.


whispBridgeMacAddr

Object ID: 1.3.6.1.4.1.161.19.3.3.4.1.1
Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-only
Status: current

MAC Address of the registered enity.


whispBridgeTbErr

Object ID: 1.3.6.1.4.1.161.19.3.3.7.3
Syntax: INTEGER
Access: read-only
Status: current

Bridging table errors.


whispBridgeTbFree

Object ID: 1.3.6.1.4.1.161.19.3.3.7.2
Syntax: INTEGER
Access: read-only
Status: current

Number of free entries in bridging table.


whispBridgeTbUsed

Object ID: 1.3.6.1.4.1.161.19.3.3.7.1
Syntax: INTEGER
Access: read-only
Status: current

Number of used entries in bridging table.


whispFeatureKeyOrigin

Object ID: 1.3.6.1.4.1.161.19.3.3.1.86
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

Origin of Feature Key which includes GMT time and location of the Key programming (if time is 0 the key was converted locally)


whispLayer2NeighborEntry

Object ID: 1.3.6.1.4.1.161.19.3.3.11.1
Syntax: Sequence (Structure)
entryL2Index
neighborMAC
neighborIP
neighborSiteName

Access: not-accessible
Status: current

Neighbor Entry.


whispLayer2NeighborTable

Object ID: 1.3.6.1.4.1.161.19.3.3.11
Syntax: Sequence of Type (Array)
WhispLayer2NeighborEntry

Access: not-accessible
Status: current

Neighbor information table.


whispUserEntry

Object ID: 1.3.6.1.4.1.161.19.3.3.10.1
Syntax: Sequence (Structure)
entryIndex
userLoginName
userPswd
accessLevel
loginStatus
loginMethod
sessionTime

Access: not-accessible
Status: current

User entry.


whispUserTable

Object ID: 1.3.6.1.4.1.161.19.3.3.10
Syntax: Sequence of Type (Array)
WhispUserEntry

Access: not-accessible
Status: current

User information table.


whispVAge

Object ID: 1.3.6.1.4.1.161.19.3.3.8.1.3
Syntax: INTEGER
Access: read-only
Status: current

VLAN member age.


whispVID

Object ID: 1.3.6.1.4.1.161.19.3.3.8.1.1
Syntax: INTEGER
Constraints: 1..4095
Access: read-only
Status: current

VLAN member ID.


whispVLANEntry

Object ID: 1.3.6.1.4.1.161.19.3.3.8.1
Syntax: Sequence (Structure)
whispVID
whispVType
whispVAge

Access: not-accessible
Status: current

VLAN entry.


whispVLANRemarkEntry

Object ID: 1.3.6.1.4.1.161.19.3.3.17.1
Syntax: Sequence (Structure)
sourceVID
remarkVIDState
remarkVID
remarkPriorityState
remarkPriority

Access: not-accessible
Status: current

Remarking VLAN entry.


whispVLANRemarkTable

Object ID: 1.3.6.1.4.1.161.19.3.3.17
Syntax: Sequence of Type (Array)
WhispVLANRemarkEntry

Access: not-accessible
Status: current

Active VLAN Remarking table.


whispVLANTable

Object ID: 1.3.6.1.4.1.161.19.3.3.8
Syntax: Sequence of Type (Array)
WhispVLANEntry

Access: not-accessible
Status: current

VLAN member table.


whispVType

Object ID: 1.3.6.1.4.1.161.19.3.3.8.1.2
Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

VLAN member type.


whispWebUserAccessMode

Object ID: 1.3.6.1.4.1.161.19.3.3.2.118
Syntax: INTEGER
Constraints:
0: local
1: remote
2: remotethenlocal

Access: read-write
Status: current

This variable selects if web page users for the radio should be authenticated locally or
via a centralised remote Radius server