MIB File
PowerLine Gateway

Module Information:

File:	WHISP-PLV-GATEWAY-MIB
Description:	Initial Version.
Organization:	Motorola
Version:	Software Release v2.0
Contact Info:	Canopy Technical Support email: support@cambiumnetworks.com

gwTrapDeviceUpgradeCompleted

Object ID: 1.3.6.1.4.1.161.19.3.8.1.2.0.4

Syntax: Sequence (Structure)

gwTrapDeviceUpgradeCompleted

gwInfoDeviceUpgradeStatus

gwInfoDevFirmwareVer

Access: SNMP Notification
Status: current

This Notification is generated once the Device Firmware Upgrade process is completed.

gwTrapDeviceUpgradeStarted

Object ID: 1.3.6.1.4.1.161.19.3.8.1.2.0.3

Syntax: Sequence (Structure)

gwTrapDeviceUpgradeStarted

gwInfoDeviceUpgradeStatus

gwInfoDevFirmwareVer

Access: SNMP Notification
Status: current

This Notification is generated if the Gateway has started the Device Firmware
Upgrade process.

gwTrapRegComplete

Object ID: 1.3.6.1.4.1.161.19.3.8.1.2.0.1

Syntax: Sequence (Structure)

gwTrapRegComplete

gwModemLUID

gwModemPhysAddress

Access: SNMP Notification
Status: current

This Notification is generated if the Modem has successfully registered
to the Gateway.

gwTrapRegLost

Object ID: 1.3.6.1.4.1.161.19.3.8.1.2.0.2

Syntax: Sequence (Structure)

gwTrapRegLost

gwModemLUID

gwModemPhysAddress

Access: SNMP Notification
Status: current

This Notification is generated if the Modem entry is removed from the
Gateway's Modem Table, after being inactive for a period more than
'gwConfModemTableTimeout' value.

gwTrapSimUpgradeCompleted

Object ID: 1.3.6.1.4.1.161.19.3.8.1.2.0.6

Syntax: Sequence (Structure)

gwTrapSimUpgradeCompleted

gwInfoSimUpgradeStatus

gwInfoSimFirmwareVer

Access: SNMP Notification
Status: current

This Notification is generated once the Simple Module Firmware Upgrade process is completed.

gwTrapSimUpgradeStarted

Object ID: 1.3.6.1.4.1.161.19.3.8.1.2.0.5

Syntax: Sequence (Structure)

gwTrapSimUpgradeStarted

gwInfoSimUpgradeStatus

gwInfoSimFirmwareVer

Access: SNMP Notification
Status: current

This Notification is generated if the Gateway has started the Simple Module Firmware
Upgrade process.

gwAdmConfAuthKey

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.5.8

Syntax: OCTET STRING
Constraints: SIZE (16)
Access: read-write
Status: current

This object is used to configure Authentication Key, to use with BAM Server,
on the Gateway.

gwAdmConfAuthKeyOption

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.5.9

Syntax: INTEGER
Constraints:

1: useDefaultKey

2: useKeySet

Access: read-write
Status: current

This object is used to configure the Authentication Key to be used, on the
Gateway.

gwAdmConfAuthMode

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.5.7

Syntax: INTEGER
Constraints:

1: enabled

2: disabled

Access: read-write
Status: current

This object is used to Enable or Disable BAM Authentication on the Gateway.

gwAdmConfAuthServIp1

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.5.4

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure BAM Server #1 IP Address.

gwAdmConfAuthServIp2

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.5.5

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure BAM Server #2 IP Address.

gwAdmConfAuthServIp3

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.5.6

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure BAM Server #3 IP Address.

gwAdmConfDeviceMode

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.5.21

Syntax: INTEGER
Constraints:

1: switch

2: nat

Access: read-write
Status: current

This object is used to configure the device in 'switch' mode or 'NAT' mode.

gwAdmConfDeviceUpgradeStart

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.5.17

Syntax: INTEGER
Constraints:

1: upgrade

2: disabled

Access: read-write
Status: current

This object is used to Start Device Firmware Upgrade process in the Gateway.
To start the upgrade process, this object should be set to '1'.

gwAdmConfFtpFile

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.5.16

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

This object is used to configure Path and/or Filename of the firmware file,
for use with FTP-based auto-upgrade.

gwAdmConfFtpPassword

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.5.15

Syntax: OCTET STRING
Constraints: SIZE (0..16)
Access: read-write
Status: current

This object is used to configure Password to login to a FTP server,
for use with FTP-based auto-upgrade.

gwAdmConfFtpServerIp

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.5.13

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure IP Address of FTP server hosting auto-upgrade files.

gwAdmConfFtpUsername

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.5.14

Syntax: OCTET STRING
Constraints: SIZE (0..16)
Access: read-write
Status: current

This object is used to configure Username to login to a FTP server,
for use with FTP-based auto-upgrade.

gwAdmConfLUIDEnd

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.5.23

Syntax: INTEGER
Constraints: 1..2047
Access: read-write
Status: current

This object is used to configure the ending value of the Modem LUID range.
This value should not be less than gwAdmConfLUIDStart value

gwAdmConfLUIDStart

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.5.22

Syntax: INTEGER
Constraints: 1..2047
Access: read-write
Status: current

This object is used to configure the starting value of the Modem LUID range.
This value should not be greater than gwAdmConfLUIDEnd value

gwAdmConfLanConfig

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.6.1

Syntax: INTEGER
Constraints:

1: dynamic

2: static

Access: read-write
Status: current

This object is used to Enable or Disable DHCP client.

gwAdmConfLanGatewayIp

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.6.4

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure Gateway IP Address.

gwAdmConfLanIp

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.6.2

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure LAN IP Address.

gwAdmConfLanSubnetMask

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.6.3

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure LAN IP Subnet Mask.

gwAdmConfLoginPassword

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.5.2

Syntax: OCTET STRING
Constraints: SIZE (0..16)
Access: read-write
Status: current

This object is used to configure Gateway's System Management Login Password.

gwAdmConfLoginUsername

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.5.1

Syntax: OCTET STRING
Constraints: SIZE (3..16)
Access: read-write
Status: current

This object is used to configure Gateway's System Management Login Username.

gwAdmConfManagementVLANId

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.5.25

Syntax: INTEGER
Constraints: 1..4095
Access: read-write
Status: current

This object is used to enable or disable VLAN Passthrough feature.

gwAdmConfNEK

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.5.3

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

This object is used to configure Network Encryption Key of the Gateway.

gwAdmConfReset

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.5.20

Syntax: INTEGER
Constraints:

1: reset

2: disabled

Access: read-write
Status: current

This object is used to reset the Gateway configuration to Factory Defaults.
To reset the Gateway configuration to factory defaults, this object should
be set to '1'.

gwAdmConfSimUpgradeStart

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.5.18

Syntax: INTEGER
Constraints:

1: upgrade

2: disabled

Access: read-write
Status: current

This object is used to start Intellon Simple Module Firmware Upgrade process in the Gateway.
To start the upgrade process, this object should be set to '1'.

gwAdmConfSnmpAdminCommStr

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.5.12

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

This object is used to configure SNMP 'Admin' community string of the Gateway.

gwAdmConfSnmpGetCommStr

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.5.10

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

This object is used to configure SNMP 'Read' community string of the Gateway.

gwAdmConfSnmpSetCommStr

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.5.11

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

This object is used to configure SNMP 'Read-Write' community string of the Gateway.

gwAdmConfSystemReboot

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.5.19

Syntax: INTEGER
Constraints:

1: reboot

2: disabled

Access: read-write
Status: current

This object is used to Reboot the Gateway.
To reboot the Gateway, this object should be set to '1'.

gwAdmConfVLANPassthroughStatus

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.5.24

Syntax: INTEGER
Constraints:

1: enabled

2: disabled

Access: read-write
Status: current

This object is used to enable or disable VLAN Passthrough feature.

gwAdmSnmpAccessIpNetwork1

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.7.1

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure SNMP Access Network Address #1.

gwAdmSnmpAccessIpNetwork10

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.7.19

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure SNMP Access Network Address #10.

gwAdmSnmpAccessIpNetwork2

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.7.3

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure SNMP Access Network Address #2.

gwAdmSnmpAccessIpNetwork3

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.7.5

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure SNMP Access Network Address #3.

gwAdmSnmpAccessIpNetwork4

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.7.7

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure SNMP Access Network Address #4.

gwAdmSnmpAccessIpNetwork5

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.7.9

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure SNMP Access Network Address #5.

gwAdmSnmpAccessIpNetwork6

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.7.11

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure SNMP Access Network Address #6.

gwAdmSnmpAccessIpNetwork7

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.7.13

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure SNMP Access Network Address #7.

gwAdmSnmpAccessIpNetwork8

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.7.15

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure SNMP Access Network Address #8.

gwAdmSnmpAccessIpNetwork9

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.7.17

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure SNMP Access Network Address #9.

gwAdmSnmpAccessIpNetworkMask1

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.7.2

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure SNMP Access Network Address Mask #1.

gwAdmSnmpAccessIpNetworkMask10

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.7.20

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure SNMP Access Network Address Mask #10.

gwAdmSnmpAccessIpNetworkMask2

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.7.4

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure SNMP Access Network Address Mask #2.

gwAdmSnmpAccessIpNetworkMask3

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.7.6

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure SNMP Access Network Address Mask #3.

gwAdmSnmpAccessIpNetworkMask4

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.7.8

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure SNMP Access Network Address Mask #4.

gwAdmSnmpAccessIpNetworkMask5

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.7.10

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure SNMP Access Network Address Mask #5.

gwAdmSnmpAccessIpNetworkMask6

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.7.12

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure SNMP Access Network Address Mask #6.

gwAdmSnmpAccessIpNetworkMask7

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.7.14

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure SNMP Access Network Address Mask #7.

gwAdmSnmpAccessIpNetworkMask8

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.7.16

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure SNMP Access Network Address Mask #8.

gwAdmSnmpAccessIpNetworkMask9

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.7.18

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure SNMP Access Network Address Mask #9.

gwAdmWConfDNS1

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.8.5

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure DNS Server #1. This object is accessible only
if the Gateway is in NAT mode.

gwAdmWConfDNS2

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.8.6

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure DNS Server #2. This object is accessible only
if the Gateway is in NAT mode.

gwAdmWConfDhcpConfig

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.8.9

Syntax: INTEGER
Constraints:

1: enabled

2: disabled

Access: read-write
Status: current

This object is used to Enable or Disable DHCP Server. This object is accessible
only if the Gateway is in NAT mode.

gwAdmWConfDhcpEndIp

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.8.11

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure Last Address of the IP address block, that
the DHCP Server can assign to its clients. This object is accessible only if
the Gateway is in NAT mode.

gwAdmWConfDhcpLeaseTime

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.8.12

Syntax: INTEGER
Constraints:

1: thirtyMins

2: oneHour

3: twoHours

4: twelveHours

5: oneDay

6: twoDays

7: oneWeek

8: twoWeeks

Access: read-write
Status: current

This object is used to configure time period for which the IP address assigned
to a client is valid. This object is accessible only if the Gateway is in NAT
mode.

gwAdmWConfDhcpStartIp

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.8.10

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure Starting Address of the IP address block,
that the DHCP Server can assign to its clients. This object is accessible
only if the Gateway is in NAT mode.

gwAdmWConfFirewallConfig

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.8.14

Syntax: INTEGER
Constraints:

1: enabled

2: disabled

Access: read-write
Status: current

This object is used to Enable or Disable Firewall in the Gateway. This object is
accessible only if the Gateway is in NAT mode.

gwAdmWConfGateway

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.8.4

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure Default Gateway IP of the Gateway. This object
is accessible only if the Gateway is in NAT mode.

gwAdmWConfPppoePassword

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.8.8

Syntax: OCTET STRING
Constraints: SIZE (0..16)
Access: read-write
Status: current

This object is used to configure PPPoE Password. This object is accessible only
if the Gateway is in NAT mode.

gwAdmWConfPppoeUsername

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.8.7

Syntax: OCTET STRING
Constraints: SIZE (0..16)
Access: read-write
Status: current

This object is used to configure PPPoE Username. This object is accessible only
if the Gateway is in NAT mode.

gwAdmWConfSubnetMask

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.8.3

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure WAN IP Subnet Mask of the Gateway. This object
is accessible only if the Gateway is in NAT mode.

gwAdmWConfUpnpConfig

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.8.13

Syntax: INTEGER
Constraints:

1: enabled

2: disabled

Access: read-write
Status: current

This object is used to Enable or Disable the UPnP in the Gateway. This object is
accessible only if the Gateway is in NAT mode.

gwAdmWConfWanConfig

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.8.1

Syntax: INTEGER
Constraints:

1: dynamicIp

2: staticIp

3: pppoe

4: pptp

Access: read-write
Status: current

This object is used to configure the WAN Type. This object is accessible
only if the Gateway is in NAT mode.

gwAdmWConfWanIp

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.8.2

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure WAN IP Address of the Gateway. This object is
accessible only if the Gateway is in NAT mode.

gwConfAutoLogoutTime

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.2.6

Syntax: INTEGER
Constraints: 60..3660
Access: read-write
Status: current

This object is used to configure the Gateway Auto Logout Time.
User will be logged out of the Gateway's web interface, if there
is inactivity for a period more than the Auto Logout Time.

gwConfDate

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.2.4

Syntax: OCTET STRING
Constraints: SIZE (10)
Access: read-write
Status: current

This object is used to configure Gateway's system clock date.
The input format is YYYY/MM/DD.
This object is accessible only if gwConfNtpConfig is disabled.

gwConfModemTableTimeout

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.2.5

Syntax: INTEGER
Constraints: 5..1440
Access: read-write
Status: current

This object is used to configure the Modem Table Timeout.
Any Inactive Modem will be deleted from the Modem table, if it
is inactive for a period more than the timeout value.

gwConfNtpConfig

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.2.1

Syntax: INTEGER
Constraints:

1: enabled

2: disabled

Access: read-write
Status: current

This object is used to Enable or Disable the Gateway to set it's
system clock using NTP.

gwConfNtpServer

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.2.2

Syntax: OCTET STRING
Constraints: SIZE (20)
Access: read-write
Status: current

This object is used to configure the NTP Server.

gwConfPSD

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.2.7

Syntax: OCTET STRING
Constraints: SIZE (84)
Access: read-write
Status: current

This object indicates the Power Spectral Density of the signal, at
all the 84 carriers, that the device transmits. Starting at the left most octet,
which represents the spectral value at channel number 0, each octet represents the
spectral value at the corresponding channel number.
The channel numbers 4, 5, 13, 14, 29, 49, 50, 51, 69 and 70 are masked and their
spectral values cannot be changed.

gwConfTime

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.2.3

Syntax: OCTET STRING
Constraints: SIZE (8)
Access: read-write
Status: current

This object is used to configure Gateway's system clock time.
The input format is HH:MM::SS.
This object is accessible only if gwConfNtpConfig is disabled.

gwConfTrapCommStr1

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.3.2

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

This object is used to configure SNMP Community string for Trap Client #1.

gwConfTrapCommStr10

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.3.20

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

This object is used to configure SNMP Community string for Trap Client #10.

gwConfTrapCommStr2

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.3.4

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

This object is used to configure SNMP Community string for Trap Client #2.

gwConfTrapCommStr3

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.3.6

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

This object is used to configure SNMP Community string for Trap Client #3.

gwConfTrapCommStr4

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.3.8

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

This object is used to configure SNMP Community string for Trap Client #4.

gwConfTrapCommStr5

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.3.10

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

This object is used to configure SNMP Community string for Trap Client #5.

gwConfTrapCommStr6

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.3.12

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

This object is used to configure SNMP Community string for Trap Client #6.

gwConfTrapCommStr7

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.3.14

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

This object is used to configure SNMP Community string for Trap Client #7.

gwConfTrapCommStr8

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.3.16

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

This object is used to configure SNMP Community string for Trap Client #8.

gwConfTrapCommStr9

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.3.18

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-write
Status: current

This object is used to configure SNMP Community string for Trap Client #9.

gwConfTrapIp1

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.3.1

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure IP Address of SNMP Trap Client #1.

gwConfTrapIp10

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.3.19

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure IP Address of SNMP Trap Client #10.

gwConfTrapIp2

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.3.3

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure IP Address of SNMP Trap Client #2.

gwConfTrapIp3

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.3.5

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure IP Address of SNMP Trap Client #3.

gwConfTrapIp4

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.3.7

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure IP Address of SNMP Trap Client #4.

gwConfTrapIp5

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.3.9

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure IP Address of SNMP Trap Client #5.

gwConfTrapIp6

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.3.11

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure IP Address of SNMP Trap Client #6.

gwConfTrapIp7

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.3.13

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure IP Address of SNMP Trap Client #7.

gwConfTrapIp8

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.3.15

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure IP Address of SNMP Trap Client #8.

gwConfTrapIp9

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.3.17

Syntax: STRING
Constraints: SIZE (4)
Access: read-write
Status: current

This object is used to configure IP Address of SNMP Trap Client #9.

gwInfoDevFirmwareVer

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.1.7

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

This object indicates the Gateway Device Firmware Version.

gwInfoDeviceUpgradeStatus

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.1.11

Syntax: INTEGER
Constraints:

1: notStarted

2: inProgress

3: failed

4: successful

Access: read-only
Status: current

This object indicates the Gateway Last Software Upgrade Status.
0 - Upgrade not started
1 - Upgrade in progress
2 - Last Upgrade failed
3 - Last Upgrade was successful.

gwInfoHardwareVer

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.1.6

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

This object indicates the Gateway Hardware Version.

gwInfoLanMac

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.1.3

Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-only
Status: current

This object indicates the Gateway's LAN port MAC Address.

gwInfoLoaderVer

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.1.8

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

This object indicates the Gateway Loader Version.

gwInfoModel

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.1.1

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

This object indicates the Gateway Model Number.

gwInfoModemCount

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.1.10

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current

This object indicates the number of Modems registered
to the Gateway.

gwInfoPlcMac

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.1.5

Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-only
Status: current

This object indicates the Gateway PLC MAC Address

gwInfoSerialNumber

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.1.2

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

This object indicates the Gateway Serial Number.

gwInfoSimFirmwareVer

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.1.9

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

This object indicates the Intellon Simple Module Firmware Version.

gwInfoSimUpgradeStatus

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.1.12

Syntax: INTEGER
Constraints:

1: notStarted

2: inProgress

3: failed

4: successful

Access: read-only
Status: current

This object indicates the Intellon Simple Module's last Software Upgrade Status.
0 - Upgrade not started
1 - Upgrade in progress
2 - Last Upgrade failed
3 - Last Upgrade was successful.

gwInfoTemperature

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.1.13

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current

This object indicates the ambient temperature of the Gateway.

gwInfoWanMac

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.1.4

Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-only
Status: current

This object indicates the Gateway's WAN port MAC Address.

gwModemDescr

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9.1.2

Syntax: OCTET STRING
Constraints: SIZE (0..255)
Access: read-only
Status: current

The value of this object should be same as the object 'sysName' of the
Device registered to the Gateway.

gwModemDeviceType

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9.1.27

Syntax: INTEGER
Constraints:

0: modem

1: repeater

2: other

Access: read-only
Status: current

This object indicates the Type of the Device registered to the Gateway
0 = Modem
1 = Repeater
2 = Other

gwModemHardwareVersion

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9.1.5

Syntax: OCTET STRING
Constraints: SIZE (0..127)
Access: read-only
Status: current

This object indicates the Hardware Version of the Modem.

gwModemIP

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9.1.4

Syntax: STRING
Constraints: SIZE (4)
Access: read-only
Status: current

This object indicates the IP Address of the Modem.

gwModemInDiscards

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9.1.15

Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

This object indicates the number of inbound packets which were
chosen to be discarded even though no errors had been detected
to prevent their being deliverable to a higher-layer protocol.
One possible reason for discarding such a packet could be to
free up buffer space.

gwModemInError

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9.1.16

Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

This object indicates the number of inbound packets that contained
errors preventing them from being deliverable to a higher-layer
protocol.

gwModemInNUcastPkts

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9.1.14

Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

This object indicates the number of subnetwork-broadcast and
subnetwork-multiicast packets delivered to a higher-layer protocol.

gwModemInOctets

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9.1.12

Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

This object indicates the octets received by the Modem over
Powerline, including framing characters.
to each Modem.

gwModemInUcastPkts

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9.1.13

Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

This object indicates the number of subnetwork-unicast packets
delivered to a higher-layer protocol.

gwModemInUnknownProtos

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9.1.17

Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

This object indicates the number of packets received, but were
discarded because of an unknown or unsupported protocol.

gwModemLUID

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9.1.1

Syntax: INTEGER
Constraints: 0..4095
Access: read-only
Status: current

This object indicates the unique value assigned by the Gateway,
to each Modem.

gwModemMtu

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9.1.10

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current

This object indicates the size of the largest datagram that can
be sent and received by the Modem, in octets.

gwModemOutDiscards

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9.1.21

Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

This object indicates the number of outbound packets which were chosen
to be discarded even though no errors had been detected to prevent their
being transmitted. One possible reason for discarding such a packet could
be to free up buffer space.

gwModemOutError

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9.1.22

Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

This object indicates the number of outbound packets that could not be
transmitted because of errors.

gwModemOutNUcastPkts

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9.1.20

Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

This object indicates the total number of packets that higher-level
protocols requested be transmitted to a non-unicast (i.e., a
subnetwork-broadcast or subnetwork-multicast) address, including those
that were discarded or not sent.

gwModemOutOctets

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9.1.18

Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

This object indicates the total number of octets transmitted,
including the framing characters.

gwModemOutQLen

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9.1.23

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

This object indicates the number of packets in output packet queue.

gwModemOutUcastPkts

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9.1.19

Syntax: Counter
Constraints: 0..4294967295
Access: read-only
Status: current

This object indicates the total number of packets that higher-level
protocols requested be transmitted to a subnetwork-unicast address,
including those that were discarded or not sent.

gwModemPSD

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9.1.28

Syntax: OCTET STRING
Constraints: SIZE (84)
Access: read-only
Status: current

This object indicates the Software Version of the Modem.

gwModemPhysAddress

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9.1.3

Syntax: OCTET STRING
Constraints: SIZE (6)
Access: read-only
Status: current

This object indicates the PLC MAC Address of the Modem.

gwModemRoboByte40

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9.1.24

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current

This object indicates the current channel receive capacity of the Modem.

gwModemRoboDrops

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9.1.26

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current

This object indicates the Powerline link send failures of the Modem.

gwModemRoboFails

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9.1.25

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current

This object indicates the Powerline link receive failures of the Modem.

gwModemSessState

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9.1.8

Syntax: INTEGER
Constraints:

0: idle

1: inSession

2: clearing

3: reRegDnRst

4: authChal

5: registering

6: notInUse

Access: read-only
Status: current

This object indicates the current Operational state of the Modem.
0 = Idle
1 = In Session
2 = Clearing
3 = Re-registration downlink reset
4 = Authentication Challenge
5 = Registering
6 = Not in use.

gwModemSoftwareBootVersion

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9.1.7

Syntax: OCTET STRING
Constraints: SIZE (0..127)
Access: read-only
Status: current

This object indicates the Boot Loader Version of the Modem.

gwModemSoftwareVersion

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9.1.6

Syntax: OCTET STRING
Constraints: SIZE (0..127)
Access: read-only
Status: current

This object indicates the Software Version of the Modem.

gwModemSpeed

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9.1.11

Syntax: Gauge
Constraints: 0..4294967295
Access: read-only
Status: current

This object indicates an estimate of Modem's current bandwidth,
in Mbps.

gwModemsessionCount

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9.1.9

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current

This object indicates the number of times the Modem is In and
Out of session.

gwPwrLnMaxDelay

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.4.1

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current

This object indicates the Maximum transfer delay on Powerline.

gwPwrLnRoboByte40

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.4.7

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current

This object indicates the raw value of channel capacity as
reported by Intellon PHY

gwPwrLnRoboDrops

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.4.9

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current

This object indicates the Powerline protocol transmit drops,
in ROBO mode.

gwPwrLnRoboFails

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.4.8

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current

This object indicates the Powerline protocol receive failures,
in ROBO mode.

gwPwrLnTxAck

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.4.2

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current

This object indicates the Powerline Transmit ACK count.

gwPwrLnTxCarrLoss

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.4.6

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current

This object indicates the Powerline Transmt Carrier Loss
Detection.

gwPwrLnTxColl

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.4.5

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current

This object indicates the Powerline Transmission Collisions.

gwPwrLnTxFail

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.4.4

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current

This object indicates the Powerline Transmission Failures.

gwPwrLnTxNak

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.4.3

Syntax: INTEGER
Constraints: -2147483648..2147483647
Access: read-only
Status: current

This object indicates the Powerline Transmit NACK count.

whispPlvGwModemEntry

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9.1

Syntax: Sequence (Structure)

gwModemLUID

gwModemDescr

gwModemPhysAddress

gwModemIP

gwModemHardwareVersion

gwModemSoftwareVersion

gwModemSoftwareBootVersion

gwModemSessState

gwModemsessionCount

gwModemMtu

gwModemSpeed

gwModemInOctets

gwModemInUcastPkts

gwModemInNUcastPkts

gwModemInDiscards

gwModemInError

gwModemInUnknownProtos

gwModemOutOctets

gwModemOutUcastPkts

gwModemOutNUcastPkts

gwModemOutDiscards

gwModemOutError

gwModemOutQLen

gwModemRoboByte40

gwModemRoboFails

gwModemRoboDrops

gwModemDeviceType

gwModemPSD

Access: not-accessible
Status: current

Information about a particular Modem registered to the Gateway.

whispPlvGwModemTable

Object ID: 1.3.6.1.4.1.161.19.3.8.1.1.9

Syntax: Sequence of Type (Array)

WhispPlvGwModemEntry

Access: not-accessible
Status: current

This table contains one row per Modem registered to the Gateway.